... Funny Name, Good Tools

Instagram

Tools for Sale: Archives

Archived Tools

These are tools that were sold in the past. I'm preserving the pictures and descriptions for informational purposes.

Please View my current list of Tools For Sale.

Archives arranged by quarter:

July-September, 2014
April-June, 2014
Jan-March, 2014
October-December, 2013
July-September, 2013
April-June, 2013
Jan-March, 2013
October-December, 2012
July-September, 2012
April-June, 2012
February & March, 2012
January, 2012
Oct-Dec, 2011
July-Sept, 2011
April-June, 2011
January-March, 2011
October-December, 2010
May-September, 2010



Tools Sold Q3, 2014
All Items Below This Point Have Been Sold




1933 Craftsman Wood Service Co. Original Catalog.
This catalog features 74 pages and is in very good condition with the slightest wear. The Chicago, IL company made and sold veneer, furniture plywoods of all species, turning stock, lumber of all sorts, inlays, furniture legs, hardware, and many other items. They also sold woodworking tools of all sorts. The middle pages are full of color prints of the various inlays they offered. It's an interesting catalog in nice shape
$10 This Item Has Been Sold



Original 1941 Stanley Catalog.
This is a 240 page full-line catalog in excellent condition. There are no missing pages. The covers have only minor wear. It's an excellent reference boo.
$25 This Item Has Been Sold



Original Starrett 1935 Full-Line Catalo.
This is a large 382 page catalog not including a 32 page supplement in the middle containing Starrett's latest tools. It is in excellent condition with virtually zero wear.
$22 This Item Has Been Sold



Original 1927 Stanley Sweetheart Era catalog.
This is a ful-line Stanley catalog from the middle of the Sweetheart era. It's in very good condition with minor wear to the covers.It makes an excellent reference and a fun read.
$25 This Item Has Been Sold



Stanley 1953 Full Line Catalog.
This catalog is 208 pages, published in 1953. It has wear to the front cover and a tear in the first dozen pages- they are still complete and legible. An excellent reference.
$15 This Item Has Been Sold



Excellent Millers Falls / Goodell-Pratt 1935 Catalog.
This is a 240 page pocket size catalog containing the combined stock of both companies. It is in excellent condition with no damage.
$24 This Item Has Been Sold



Starrett original 1938 catalog.
This 290 page catalog is in excellent condition it has no damage or wear. It dates to 1938 and contains Starrett's full line of precision machinists' tools. It is an excellent reference.
$20 This Item Has Been Sold



With Hammer in Hand.
This is the second printing published in 1973. It is in very good condition condition with no damage at all, only minor wear. This is a scarce book, published for the Winterthur Museum. It discusses the Dominy family of craftsmen of East Hampton, NY. The Dominys were clockmakers from the mid-1700s through the 1800s. Their business was well-documented. Their work, tools, and their shop is discussed in detail in this book. It's a fascinating read. A very scarce and desirable book- take a look at what they sell for on Amazon or Abe for comarison.
$100 This Item Has Been Sold



With Hammer in Hand.
This is the original first printing published in 1968. It is in excellent condition condition with no damage at all, only the lightest wear. This is a scarce book, published for the Winterthur Museum. It discusses the Dominy family of craftsmen of East Hampton, NY. The Dominys were clockmakers from the mid-1700s through the 1800s. Their business was well-documented. Their work, tools, and their shop is discussed in detail in this book. It's a fascinating read. A very scarce and desirable book- take a look at what they sell for on Amazon or Abe for comparison.
$100 This Item Has Been Sold



With Hammer in Hand.
This is the original 1982 printing with its original dustjacket. the book is in excellent condition condition with no damage at all, only the lightest wear. The dustjacket is in poor condition with some taped repairs, though the spine still looks good on the shelf. This is a scarce book, published for the Winterthur Museum. It discusses the Dominy family of craftsmen of East Hampton, NY. The Dominys were clockmakers from the mid-1700s through the 1800s. Their business was well-documented. Their work, tools, and their shop is discussed in detail in this book. It's a fascinating read. A very scarce and desirable book- take a look at what they sell for on Amazon or Abe for comparison.
$100 This Item Has Been Sold



Whelan: Making Traditional Wooden Planes. .
This 120 page paperback book covers all aspects of making wooden planes- how planes work, how they were made in history, the tuning and use of wooden planes, and the tools required. In 23 chapters it discusses making wooden bench planes, various sorts of molding planes from hollows and rounds to more complex boxed molders, dados, rabbets, to chamfer and fillister planes and even an ebony plow. It is an excellent reference book for anyone interested in building wooden planes. It's an out of print book in high demand.
$65 This Item Has Been Sold



Mercer: Ancient Carpenters Tools.
This is the 4th edition published in 1968. It has 330 pages with some very interesting photos. It's an interesting read.
$10 This Item Has Been Sold



Stanley 1939 Catalog Reprint.
This 258 page catalog was originally published just after the Sweetheart era and before the WWII materials and labor shortages. This is the 1988 Roger K Smith reprint. It is in excellent condition with only the slightest wear. It's an interesting read, and an excellent reference for an interesting time in Stanley's past.
$25 This Item Has Been Sold



1939 Norton "How to Sharpen" Pamphlet.
This is a pocket-sized 48 page, profusely illustrated and photographed, reference guide published by Norton. It includes descriptions and uses for many of their abrasives including Arkansas and synthetic stones, hand grinder, axe stones, etc. It's an interesting and enlightening read.
$16 This Item Has Been Sold



Original Disston 1939 Saw, File, and Tool Manual.
This is an excellent example, perhaps the best I've come across. It has 48 pages discussing Disston's full line of tools including saws, files, layout tools, etc. It contains pages on caring for and using hand saws of all sorts. This example is in excellent condition with barely any wear at all. It's an interesting and informative Disston publication.
$26 This Item Has Been Sold



Buck Brothers 1890 Catalog Reprint.
This is the Ken Roberts 1976 reprint. This version contains Roberts' full history and compendium of Buck advertisements in the back of the catalog- a very valuable read and something not included in later reprints. This reprint is in excellent condition with no wear or damage. It contains 128 pages including Buck's full line of top quality edge tools- chisels, gouges, slicks, framing tools, bit stock tools, etc. It makes an outstanding reference.
$26 This Item Has Been Sold



North Brothers 1912 Catalog Reprint.
This is a 112 page catalog featuring the company's full line of boring tools, automatic and ratchet screwdrivers, as well as their line of ice cream freezers and Christmas tree stands (not joking). The catalog is a hard one to find these days and serves as an excellent reference for anyone interested in the pre-Stanley days of North Brothers. It is in excellent condition with no damage at all.
$24 This Item Has Been Sold



191 Simonds Saw Catalog Reprint.
This is a hard to find reprint today. It has 196 pages of all of Simond's saw products from handsaws, back saws, buck, and felling, circular and logging saws. The catalog talks about the company's history and includes some interesting photos of the factory and the products in use. It's a great reference and in excellent condition with no damage or wear at all.
$25 This Item Has Been Sold



Rayls 1905 Hardware & Tool Catalog Reprint.
This is one of my favorite catalog reprints to use as a reference and to peruse from time to time. It's loaded with excellent etchings and descriptions of a wide range of tools from Stanley planes, Disston saws, Starrett, Buck, Millers Falls, Goodell, they are all in here and described in detail. This catalog has 290 pages. It's in excellent condition with only minor wear. It was published by Roger K Smith in 1976 and has become somewhat hard to find. I think it's a fantastic catalog to add to your library
$25 This Item Has Been Sold



Boxwood and Brass: Stanley Rules 1855-1975.
This book was written by Philip Stanley and published in 1984. This example is in very good condition with minor wear. It's a scarce but essential reference for rule collectors and old tool researchers.
$35 This Item Has Been Sold



Kauffman: American Axes. .
152 pages, in excellent condition. It covers the history, form, and function of the American axe. It's a good reference and a fun one to read.
$12 This Item Has Been Sold



Hack: Classic Hand Tools.
This is the book that got me interested in vintage hand tools. It's a gorgeous book and must-have in any woodworker's library. This example is in excellent condition. It is the hardcover edition with a near perfect dust jacket.
$20 This Item Has Been Sold



Chas. A Strelinger 1897 Catalog Reprint.
This is a dense, thick 1,000 page catalog full of every tool and piece of equipment made at the end of the 19th century. It has tons of hand woodworking tools, treadle tools, machinist and blacksmith tools, early power equipment, just everything. This catalog is an education in and of itself. It is noteworthy in that it's not just a description of the tools it sells, rather, Strelinger took the time to educate its customers on the merits of the different types of tools. For us woodworkers and vintage tool junkies there is priceless information on bitstock tools, handsaws, and wooden planes written and published while they were being manufactured and sold. Of all the vintage hardware catalogs, this one is by far my favorite and the one I turn to the most often. It is in excellent, undamaged condition
$26 This Item Has Been Sold



Hammacher Schlemmer 1896 Catalog Reprint.
This is a 400 page catalog in perfect condition featuring Hammacher's full line of tools, equipment, and machinery. This is a tough one to find today.
$24 This Item Has Been Sold



Holtzapffel: Turning and Mechanical Manipulation Vol 2.
This is the 1993 1,040 page reprint of the original classic on turning. IT is in excellent condition.
$15 This Item Has Been Sold



Restoring, Tuning, and using Classic Woodworking Tools by Mike Dunbar.. .
This much loved book has been out of print for a long time, a shame as it is a fantastic reference for anyone interested in putting vintage hand tools to use. This is a paperback version in very good condition. This example is in very good condition with no damage and only the lightest wear.
$35 This Item Has Been Sold



Restoring, Tuning, and using Classic Woodworking Tools by Mike Dunbar.. .
This much loved book has been out of print for a long time, a shame as it is a fantastic reference for anyone interested in putting vintage hand tools to use. This is a paperback version in very good condition. This example is in very good condition with no damage and only the lightest wear.
$35 This Item Has Been Sold



Diederot Pictorial Encyclopedia Vols. 1 and 2.
These are t3wo excellent copies of the classic text on the trades of the 17th century. It's beautifully illustrated with thousands of illustrated plates. Both volumes are in excellent condition.
$45 This Item Has Been Sold



Ken Roberts: Wooden Planes in 19th Century America Volumes I and II.
These are two exceptional copies of Roberts amazing work on American wooden planes. Both copies are in excellent condition with mylar covers over the dust jackets. The have survived in excellent condition with only the lightest wear. Volume 1 is the second edition which incorporates the additional information included in the update to the first edition. This book discusses many aspects of early wooden planes- types, makers, the progression of the industry, etc. It has many detailed illustrations and reprints of period publications and advertisements. TAn excellent reference for anyone interested in wooden planes The second volume is one of my favorite books on vintage tools. In it 450+ pages, Roberts discusses the history of the Chapin family of planemakers. This history goes on to describe the plane making industry throughout the 19th century with pictures of planemaking tools, original correspondence and invoices, and amazing photos. The pictures of the original planemaking jigs and
$100 This Item Has Been Sold



Tools: Working Wood in Eighteenth-Century America.
This is a 125 page softcover full of excellent photos and illustrations of early American woodworking tools. It was written by Jay Gaynor of Colonial Williamsburg, this is a fascinating book to read.
$12 This Item Has Been Sold



Van Vliets Craft and Trades by Harry Bober.
This is a 1981 reprint made by the EAIA of Van Vliet's 1635 original. It contains a 31 page study of the original 18 etchings. 17 of the original etchings remain in this copy. The loose etchings in this book are so well done than many copies are missing them. I imagine many wound up mounted and framed. This copy is in excellent condition and is extremely hard to find today.
$30 This Item Has Been Sold



Swan 1/4in Socket Chisel.
This is a 1/4in James Swan socket bevel-edge chisel with a rather stout looking hooped handle. The chisel has zero pitting on the back and has been lapped clean and shiny. It will make a good worker for both chopping and paring.
$28 This Item Has Been Sold



Exceptionally Thin and Fine Addis 12in Bevel-Edge Paring Chisel.
This chisel measures 12in overall with most of that in the extremely thin, flexible blade. The handle is nicely shaped and diminutive. The blade is clean and very sharp. There is no pitting and the working edge has been lapped flat. It has the most flex of any chisel I've ever seen. It's a delicate tool for the finest paring work.
$30 This Item Has Been Sold



Massive Barton Bros. 2in Wide Gouge.
This is a wide, flat gouge mare by Barton Bros in Sheffield. It's marked "Extra-Carbonized Cast STeel". The chisel is in fair condition and will be usable with some work. The bevel needs a quick grind and there is minor pitting on the inside face a quick inside bevel will fix in no time. The handle is fair, but solid. IT has a tight check near the ferrule which is cracked. It will be a user with a bit of work, perhaps suited to carving large bowls, scoops, etc.
$15 This Item Has Been Sold



Mathieson 3/16in PAring Chisel.
This is a thin, fine paring chisel in very good condition with the original Mathieson decal stoll on the beech handle. the blade is long and thin. The bevel is sharp and the back nearest the bevel is clean and flat. Right afterwards there is a hollow on the right side. I lapped it quickly and found it easy to work so once that first bit of steel is used up it should flatten out easily. Otherwise it's a fine worker, suited for paring out waste between dovetails.
$20 This Item Has Been Sold



Wide, Short Butchet tang Paring Chisel.
This chisel has an exceptionally clean back that's almost perfectly flat. I lapped it a bit and found a slight hollow, but nothing that won't work out easily enough. The bevel is sharp and the back has no pitting at all. The handle has an old check but is otherwise fine. it's a nice short wide chisel for paring where you need a lot of control- tennon cheeks perhaps.
$20 This Item Has Been Sold



British 1/8in Tang Chisel.
This is a thin, fine paring chisel made by S. Britton in Sheffield and featuring the firm's swan logo on the blade. The back is reasonable clean and will sharpen up easily. The handle has no damage. It should be a fine worker in a useful tiny size.
$20 This Item Has Been Sold



Exceptioanl Buck 1/2in Tang Firmer Chisel.
This chisel is in exceptional condition- the back is flat and clean without any pitting,. I quickly lapped the first bit to prove it flat. The handle is original and in excellent condition without damage or wear. It's a great example of this firm's top-quality work.
$24 This Item Has Been Sold



Exceptioanl Buck 1/2in Tang Firmer Chisel.
This is a slightly earlier version of the chisel above.. This too is in great condition condition- the back is flat and clean without any pitting,. I quickly lapped the first bit to prove it flat. The curvy apple handle is original and in excellent condition without damage or wear. it has a great shape that feels wonderful in hand.The bevel has a tiny chip that will need to be ground out, but that's a few seconds worth of labor to get this top quality edge tool back up and running. It's a great example of this firm's top-quality work.
$26 This Item Has Been Sold



Addis no. 21 Bent Carving chisel.
This is a small3/8in Addis bent carving chisel. It has a lot of blade left still and a good hsrp bevel. The handle has a check and has been reinforced and I think looks pretty cool. It will work well, even if it won't win a beauty contest.
$12 This Item Has Been Sold



Exceptional Woodcock 3/8in Boxwood-handleed Tang Paring Chisel.
This is a top quality Sheffield edge tool in great shape. The handle is near perfect, save an owner's mark. the blade has no pitting at all and the back inch has been lapped clean and flat. the bevel is sharp. It will make a great user paring chisel.
$24 This Item Has Been Sold



Keaney & Sons, Sheffield 1 1/4in Tang Firmer Chisel.
This is a medium duty straight-sided tang firmer made by Keaney. It has a solid boxwood handle. The back of the blade is fairly clean with specks of pitting scattered in a few placed. Overall it's quite clean and should sharpen up quite easily. The handle has some dings but no cracks or chips. The handle is oversized for those of you with big hands.
$25 This Item Has Been Sold



Tiny 1/8 in V Carving Tool.
This tool is unmarked, but the handle has an owner's name and the dave Nov 21, 1910 and "Allentown" written in pencil. It's a tiny little V tool in usable condition.
$20 This Item Has Been Sold



Tiny Addis 1/8in Curved V Carving Tool.
This is an excellent example with no pitting on the inside face and a decent sharp bevel. It is a no. 40, 1/8in wide with a curved blade. The handle is in excellent condition.It's a scarce profile in great shape.
$26 This Item Has Been Sold



Herring Bros. 1/4in Flat Carving Gouge.
This is a flat no. 4 sweep 1/4in gouge in very good condeition. The handle has no damage. There is no pitting on the inside face. It's a solid user.
$18 This Item Has Been Sold



Excellent Ibbotson no. 6 1/4in Carving Tool.
This is a top quality carving gouge in excellent condition. It's a useful general-purpose size and shape. The handle is perfect. The inside face of the blade has zero pitting or discoloration. The bevel has no chips or damage. It will sharpen easily and be a great worker.
$24 This Item Has Been Sold



Gorgeous Witherby 1/8in Mortise Chisel.
This is a long, thick mortise chisel made by Witherby. It is in excellent user condition. The blade has zero pitting at all on the back. It's been lapped and polished. The chisel measures 12.5in long overall. The handle is in great shape with minor wear. It's a top quality Witherby in great user condition.
$28 This Item Has Been Sold



Gorgeous Buck Bros 1/2in Bevel-EdgeTang Paring Chisel.
This is a thin, fine paring chisel with an absolutely perfect blade. There is no pitting at all and the back has been lapped flat and polished. The fancy handle is in perfect condition and has never been struck with a mallet. The blade is long, the chisel measuring over 12.5in overall. It's a top quality fine paring chisel
$30 This Item Has Been Sold



Gorgeous Buck Bros 1/2in Bevel-EdgeTang Paring Chisel.
This is a thin, fine paring chisel with an absolutely perfect blade. There is no pitting at all and the back has been lapped flat and polished. The fancy handle is in perfect condition and has never been struck with a mallet. The blade is long, the chisel measuring over 12.5in overall. It's a top quality fine paring chisel
$30 This Item Has Been Sold



Unmarked 5/16in Tang Paring Chisel.
This chisel measures a bit over 9in long. The back has been flattened and polished, the bevel quite sharp. It was found with a bunch of other Addis tools, but this one has no mark.
$10 This Item Has Been Sold



Short Charles Buck Tang Butt Chisel.
This is a short 6in chisel made by Charles Buck. It has a nicely turned handle I believe is cherry. The back has a few specks of discoloration but is generally flat and clean. It's a nice smaller size for controlled paring or other use. It should be a fantastic user, Charles Buck edge tools being considered among the best vintage edge tools.
$25 This Item Has Been Sold



Butcher 1/4in no. 7 Carving Gouge.
This is an excellent example of Butcher's work with a nice apple handle and near perfect blade with no pitting at all. It's a good general purpose size and shape in great user condition.
$22 This Item Has Been Sold



Exceptional DR Barton 3/8in Flexible Tang Paring Chisel.
Barton made some great edge tools and this one is a nice example of their work. The chisel is 13in long overall with most of that in the thin, tapered blade. The handle is apple and has some nice curl. There is a flat planed on one side so it doesn't roll off the bench top. The back has been lapped. The first 1/2in near the edge is clean and perfect. There is some very light pitting in one small area then after that it's clean. It's not an issue and won't affect use. It's a really nice example in perfect user condition.
$28 This Item Has Been Sold



Massive Ohio Tool Co. 1in Corner Chsiel.
This is a thick, heavy corner chisel measuring 15in overall. The blade is in good condition with minor pitting scattered about. The bevel is in excellent condition with the proper "lip" in the corner. The handle has some wear but is certainly capable of absorbing much more. It should be a good user chisel for timber framing, etc.
$30 This Item Has Been Sold



Aboslutely Tiny H. Taylor 1/16in no. 11 gouge.
This is a tiny veining gouge made by Taylor. There is no room for a maker's stamp so they just applied their acorn mark and "England" The sweep is so steep it's almost a V tool. It's a rare small size in great working order.
$25 This Item Has Been Sold



Addis 3/16in Bent V Tool. .
This is an Addis no. 41 bent V tool in excellent condition. The blade is in near perfect with the "wings forward" profile and sharp bevels. The handle has s tight check. It's a very good user with no pitting at all.
$24 This Item Has Been Sold



Big 1 1/4in Socket Gouge.
This is a tough millwright's socket gouge measuring 1 1./4in wide na 13in long. It has a partial maker's mark I believe it Witherby. The inside face has no pitting at all. The bevel is in excellent condition without damage.
$22 This Item Has Been Sold



Marples 5/8in Flat Gouge.
This is a Marples, Hibernia 5/8in wide gouge with a double bevel. The bevel grind really isn't the best so it should be touched up. There is no pitting, however, and it should be completely usable. It's a good, long gouge made by one of the top edge tool makers, well worth the small effort to restore the bevel and make it a fine user.
$15 This Item Has Been Sold



Extra-Long PS&W 1 1/4in Socket Firmer Chisel.
This chisel measures 14.5in long including the handle. It has pitting on the front face which is cosmetic only. The back has very scattered pitting but the part nearest the bevel is clean and polished. The handle is near perfect. The bevel is sharp.It's a stout chisel for all sorts of work.
$22 This Item Has Been Sold



Excellent James Cam 1/4in Pigsticker Mortise Chisel.
This is a perfect user mortise chisel with a nice clean back, plenty of blade left and a newer beech handle in excellent condition. The width is actually just a hair under 1/4in. but no where near 3/16.
$35 This Item Has Been Sold



Large 7/16in Stout Mortise Chisel.
This is a perfect user mortise chisel made by mutzig framont, the famous French edge tool and blade maker. The chisel is 12in long and has a very large copper ferrule . The blade has some scattered pitting that laps easily enough. It's an interesting user mortise chisel for tough jobs.
$26 This Item Has Been Sold



Exceptional Marples 5/8in Mortise Chisel.
This is a tough, stout 5/8in mortise chisel made by Wm. Marples in Sheffield. Ti measures 13in long overall. It has a tough ash or hickory handle with a steel hoop at the end. The back of the blade is clean and completely free of any pitting at all. I quickly lapped the first inch and found it clean and flat. It's in exceptional condition and should be a top worker.
$35 This Item Has Been Sold



Short Gilpin 3/8in Socket Mortise Chisel.
This socket mortise chisel is only 10in long. It is in excellent user condition with a nice clean, polished back and sharp bevel.
$25 This Item Has Been Sold



Matched Set of Five Marples Carving Tools.
These five carving tools were all found together and represent a good mix of smaller work. The gouges all have matching handles and blades. The set includes;1/8in deep no, 9 gouge, no. 39 1/4in V tool, 1/8in extra-deep veining tool. 1/8in bent flat chisel no. 12. flat 5/8in no. 5 carving gouge. All five are in excellent working condition with clean blades, no pitting and very little discoloration.
$85 This Item Has Been Sold



Massive W. Marples 1in Socket Mortise Chisel.
This is an exxtra-stout 1in mortise chisel built to last. It's more than a pound of Sheffield steel with a small handle, just big enough to grip. It has a thick steel ring to prevent it from splitting. The chisel itself tapers from 5/8in to 3/8in thick over its length. IT measures 12.5in long oveall. The back has some discoloration but the first 1in is lapped clean and flat. The bevel is in good shape and won't take much grinding at all. It's a fantastic user- a bit ugly but it will work well.
$30 This Item Has Been Sold



Exceptional Marples 1/4in Mortise chisel.
This is a heavy-duty vintage Marples socket chisel made in Sheffield. It is in absolutely top user condition without any flaws. The handle is perfect. The back of the blade is completely clean and free of pitting. The first inch or so has been lapped flat and polished. The bevel is sharp. There are no flaws. It's an outstanding worker in the most sought-after size.
$45 This Item Has Been Sold



Big Ward 1/2in Mortise Chsiel.
This boxwood handled 1/2in mortise chisel measures 14in long overall. The back has no pitting and is quite clean. The boxwood handle has aged to a deep rich gold color. There is a tight check in the handle, the only defect. Ward was surely one of, if not the highest quality edge tool maker in the UK in the late 1800s.
$35 This Item Has Been Sold



Massive Marples 1/2in Swan-Neck Mortise Chisel.
This lock mortise chisel can be used to work the bottom of a mortise. The blade is actually a hair less than 1/2in wide. It is clean and has no pitting on the important areas.
$26 This Item Has Been Sold



Exceptional Mathieson 1in Coping Gouge.
This is a long, thin coping or paring gouge. The back is completely clean and cared for without a speck of pitting. The beech handle was similarly well-kept and has no damage. the bevel is sharp- it will make an excellent worker for paring or coping moldings.
$30 This Item Has Been Sold



Exceptional I Sorby 43/8in Lock Mortise Chisel.
This lock mortise, or swan neck, chisel is in nearly unused condition. The blade had no pitting at all on the polished back. The heech handle has no wear or use at all. It measures over 15in long overall. It is in outstanding condition. This sort of chisel can be used to work the bottom of a mortise.
$35 This Item Has Been Sold



1/4in British Pigsticker mortise Chisel.
This chisel was made by Brades % Co.. It measures 11in long overall. The blade is very sharp and quite clean with minimal pitting. The handle as a couple of very old checks. It is in very good usable condition and should make a perfect worker.
$30 This Item Has Been Sold



Extra fine James Swan 1/8 inch paring chisel.
This is a fine paring chisel by Swan in Seymour, Connecticut. The blade is fine and thin and has no pitting on the back. It measures 12 inches overall. The handle looks like hickory and is beautifully shaped, tapering evenly to match the sockets taper perfectly. The handle is slightly offset to raise it above the work. It should be an excellent fine paring chisel.
$28 This Item Has Been Sold



Massive Stanley Sweetheart era 2 inch Everlast chisel.
This is a huge, heavy chisel made in the sweetheart era between 1924 and 31. It measures 9 1/2 inches overall. The blade has a flat back with no pitting. There are some tiny dings but the area nearest the bevel is clean and flat. I lapped it quickly on a 220 grit stone to prove it flat and clean. An Everlast of this is not one you want to have to flatten considerably. The steel si very hard which is why lasts so long, but it makes them a real pain to refurbish. This one looks to be a good worker. The cap has minor wear. The Hickory has no damage. It has a sweetheart logo on the socket along with the three patent dates.
$45 This Item Has Been Sold



Book Brothers 3/4in crankĖneck patternmakers gouge.
This is a three-quarter inch wide deep sweep incannell gouge in excellent condition. It has it's original Apple handle. The blade is perfectly clean, recently honed, And very sharp. The blade has no pitting or discoloration. The original tempering colors can be seen toward the tang. It has an owner's mark at the tang, the only flaw.. It's an excellent user condition.
$30 This Item Has Been Sold



Exceptional Marples 1 1/4 inch flat patternmakers gouge.
This is a beautiful, well-made crankĖ neck gouge made by Marples in Sheffield, England. It measures more than 16 inches long overall. The blade is 1 1/4in wide with a very flat sweep.The back has no pitting it all. The beven is sharp and recently home. The handle has no damage and all original finishes. It's a beautiful, well-made tool, the like of which you can't buy new today at any price. It is an excellent working order.
$35 This Item Has Been Sold



Lie-Nielsen 5/16in Socket Mortise Chisel.
This chisel is in new condition except that I don't think the handle is original. It's ready to work out of the box.
$45 This Item Has Been Sold



Gorgeous Buck Bros 3/4in Socket Paring Gouge.
This gouge has a medium sweep and a gorgeous apple handle. The handle has the Buck mark and is original to the blade. The blade is in outstanding condition with no pitting and hardly a bit of discoloration. It's an outstanding usable gouge with a sharp bevel, made by the best.
$28 This Item Has Been Sold



Berg 1/2i Bevel-Edge Socket Paring Chsiel.
This is a Berg, Eskilstuna thin paring chisel in excellent working order. The handle is obviously not original. The blade has been polished and honed and is ready to use out of the box.
$25 This Item Has Been Sold



Outstanding, ready-to-use Buck 3/4in Gouge.
This is a 3/4in wide no. 8 gouge with a polished, honed bevel that is ready to use right out of the box. The handle is original and in excellent condition. A top quality tool in ready-to-go condition.
$26 This Item Has Been Sold



Massive and Excellent Buck Bros. 2in Incannell Coping/Paring Gouge.
This is a huge gouge measuring well over 16in long overall with a massive 2in wide blade. The blade is in exceptional condition without a speck of pitting at all on the back side. The mark is crisp and clear. The apple handle is original and in excellent condition as well. It's probably the biggest I've found, and certainly one of the best.
$35 This Item Has Been Sold



Very Scarce Buck Brothers Tiny 1/8in Crank-Neck Patternmakers Gouge .
This is the smallest size Buck made in this pattern. It's a very tough one to find if you are looking to complete a set- I've been there and done that. This is an exceptional example with a perfect blade, and the original apple handle. It has the curvy Buck Brothers logo along the bend in the blade since there is no room on the inside face. It's a great example in top condition.
$28 This Item Has Been Sold



Outstanding I Sorby 1/2in Incannell Boxwood-Handled Paring Gouge.
This is a thin,f ine paring gouge with an incannell bevel made by Sorby in Sheffield. It has a perfect boxwood handle with no damage and all original finish. The back of the blade has no pitting at all and the bevel is sharp. It's a top quality user paring gouge, ideal for coping moldings, etc.
$28 This Item Has Been Sold



Marples 1/2in Tang Firmer Chisel.
This chisel measures 10in overall. It was made by Marples in Sheffield. The blade has some very light scattered pitting but none near the bevel. The boxwood handle has no damage.
$22 This Item Has Been Sold



Marples 1/2in Tang Paring Chisel.
This Bevel-Edge tang chisel measures 10in overall. It was made by Marples in Sheffield. The blade has no pitting at all and is extra thin for fine paring work. The boxwood handle has minor dings but no chips or cracks
$24 This Item Has Been Sold



Excellent Ward 1/4in Mortise Chisel.
This is a 13in long mortise chisel with an excellent handle and an interesting handle. There is a brass washer between the handle and ferrule. The beech handle has no damage. The blade has no pitting. It should make a great user.
$30 This Item Has Been Sold



Excellent Buck Brothers 1 3/8in Incannel Gouge.
This is an early Buck tool with a steel-hooped hickory handle. The handle appears incongruous with the fine, thin, blade but there's no indication it is not origina. The gouge has seen a lot of use but has been well cared for. The back has no pitting and has been constantly honed and polished over its life. The inside bevel is very sharp and well-maintained, free of any chips or dings. It's an unusually large example with a deep sweep in good working order.
$28 This Item Has Been Sold



James Swan 1in Bevel Edge Socket Chisel.
This looks a lot like Swan's version of the Stanley 750, a good general-purpose chisel tough enough for hard work but capable of fine paring as well. It measures 11in overall. It has a small area of light pitting on the back about 1/4in away from the edge. It's a very good, useful chisel from a top maker.
$24 This Item Has Been Sold



Atkin & Son 3/16in Mortise Chisel.
This classic British pig sticker style mortise chisel was made by Atkin & son in Birmingham. They are well-known high-quality planemakers. I don't recall seeing their mark on a chisel, however. This one is in very good working order. The handle is a bit on the crude side, but it's got some nice burled grain and looks tough as nails. The blade has no pitting on the back. It should be a fine chisel to use on smaller mortises.
$30 This Item Has Been Sold



Massive Ward Swan-Neck Mortise Chisel.
Ward was one of the top quality edge tool makers in Britain in the late19th/early 20th century, making tools under their own mark as well as the much esteemed Addis name. This is a very well-made swan-neck mortise chisel measuring over 20in long overall and just a hair under 5/8in wide. The bit is laminated with an applied steel working edge applied to the softer socket material. The back of the working area is completely free of pitting. It's a big wide chisel ideal for working the bottom of large mortises.
$50 This Item Has Been Sold



Gorgeous Marples 1 1/4in Flat Paring Gouge.
This is a fine, thin paring gouge with an incannel bevel made by Wm. Marples in Sheffield. It's about as nice a paring gouge as you'll come across- the blade is perfectly clean without a speck of pitting. The bevel is honed and sharp. the beech handle has all original finish. It's a superb edge tool in a size and shape you can't find made today at any price
$40 This Item Has Been Sold



Mrples 1/2in Bevel-Edge Boxwood-Handlede Paring Chisel.
this is a thin, fine tang paring mad eby Marples in Sheffield. It has a nearly perfect boxwood handle with almost all of its original decal. The back has been lapped and is flat with zero pitting.
$24 This Item Has Been Sold



Excellent, Extra-Deep 1/4in No. 11 Addis Carving Gouge.
This is as deep a sweep as they come- a no. 11 veining or carving gouge made by Ward for Addis probably between 1895-WWI. This one is in excellent condition with a perfect handle, no pitting at all on the inside face, and a freshly ground bevel. it's certainly a scarce profile and in excellent user condition.
$26 This Item Has Been Sold



Deep Marples 5/16in Bent Gouge.
This is a deep no. 18 London Pattern bent gouge made by Marples in Sheffield. It remains in very good user condition. The handle has some dings and scratches. The bevel needs a quick grind. there is no pitting at all on the flat inside face. It will be an excellent worker with a bit of attention.
$22 This Item Has Been Sold



Small Sim, London V Carving Tool.
This is an excellent little carving gouge with a nice beech handle and an excellent blade with no pitting. The inside faces of the blade were protected w ith some sort of bluish paint which kept it from rusting. It comes off easily and reveals a nice smooth inside surface with no putting ata ll to worry about. it's a fine working V tool, an ideal size for small to medium scale carving.
$30 This Item Has Been Sold



Robert Sorby 3/4in Incannel Paring Gouge.
This is a 15.5in long, thin paring or coping gouge. It has a deep sweep and the blade is marked "1in circle" to give you an idea of the profile of the blade. The bevel appears to be factory- fresh and never honed. the back has an even, honest patina from age but no pitting at all. The handle has remnants of the original decal. It should be an exceptional user coping gouge
$32 This Item Has Been Sold



Exceptional Marples 1 1/4in Flat Paring Gouge.
This is a super flat, almost straight incannel paring or coping gouge,. It measures over 16in long overall and is in superb condition overall. The blade has not one speck of pitting or discoloration anywhere. The bevel is very sharp. IT's been used and expertly cared for by someone who valued this top quality tool. The handle is in excellent condition. It's a top quality edge tool in outstanding condition. It's the sort of vintage tool you can't find made anywhere today at any price.
$40 This Item Has Been Sold



Excellent Addis no. 6 1/4in Carving Gouge.
This is a medium sweep London Pattern no. 6 gouge in excellent condition. IT has a freshly ground bevel and no pitting on the inside face. The handle is in excellent condition. It was made sometime between 1895-WWi by Ward for S.J. Addis. It's a top quality user carving tool in superb condition.
$25 This Item Has Been Sold



Excellent British 3/8in Deep Incannel Paring Gouge.
This is a thin, flexible paring gouge made by a British maker but I can't find a mark. It measures just over 13in overall. The blade is in superb condition with a highly polished back and sharp bevel. There is no pitting. It should make a great coping gouge or paring tool, and could be useful for cutting flutes ala Roy Underhill.
$26 This Item Has Been Sold



Small Marples 1/8in Paring Chisel.
This is a tiny 1/8in gouge with a gorgeous boxwood handle. the blade is in excellent condition and has no pitting. The handle has loads of dings and tiny scratches from spending many years on the bench. I love the look of the thing, even if it's not mint. There are no chips or cracks and it's tight to the blade, It's a fine working paring chisel for the smallest jobs.
$25 This Item Has Been Sold



Exceptional Ohio 5/16in Socket Former Chisel.
Ohio edge tools don't get a lot of respect, but they were good, quality tools and were made well. This 13in long socket firmer chisel has an elegant taper to the top edge you usually see on the top quality makers like Buck and Witherby. The entire blade is clean and shiny without a speck of pitting anywhere. The handle is in near new condition. It should be a top quality user chisel for fine or hard word.
$25 This Item Has Been Sold



1/8in "Pigsticker" Mortise Chisel.
This chisel is unmarked, but almost certainly British. IT has a fairly unrefined but completely useable ash handle which is in excellent condition The bade has no pitting. It should be a fine user mortise chisel
$25 This Item Has Been Sold



Big 2in Framing Chisel by hart Mfg CO..
The EAIA DAT gives a few references for the Hart Mfg Co. but none thatI can tie directly to this chisel. TI looks like a late19th to very early 20th century framing chisel. It's a big one measuring over 14in long overall. It has a wonderful hooped hickory handle in superb condition. The bevel is sharp. there is some pitting on the back. however, the first inch or so is clean,and dead flat. I quickly lapped it on a 220 grit stone to show this- that first inch of steel with give you a lot of service for sure, plus it's flat which is a huge bonus in a chisel this wide. All in all it seems like a fine worker at a bargain price
$26 This Item Has Been Sold



Marples 1/2in Boxwood-handled Paring Gouge.
This is a thin, bevel-edge paring gouge in excellent condition. The boxwood handle has aged to a beautiful golden color and retains most of the original decal. The back of the blade has been lapped clean and flat. The bevel needs a quick grind to make it usable again. IT will be a top quality worker
$25 This Item Has Been Sold



Excellent Buck Brothers 3/4in Carving Gouge.
This gouge measures just over 11in overall and is in excellent user condition. The inside face has no pitting at all. The bevel is reasonably sharp and has no chips or dings. The handle has no damage, just some discoloration. This isa no. 8 sweep on the London scale, a medium/deep sweep gouge in excellent working order.
$24 This Item Has Been Sold



Marples 5/16in Mortise Chisel.
This is a tough 13in long boxwood-handled mortise chisel in good condition. The handle has no cracks or chips. The back of the blade has some of the lightest scattered pinprick pitting that won't be an issue at all. It's a very useful size and a completely usable mortise chsiel
$26 This Item Has Been Sold



Excellent Buck, London 3/8in Deep Incannel Paring Gouge.
This is a thin, flexible paring gouge made by, or for, Buck and Hickman of London. It measures just over 14in overall. The blade is in superb condition with a clean back and sharp bevel. It is very thin and has a lot of flex to it. There is no pitting. It should make a great coping gouge or paring tool, and could be useful for cutting flutes ala Roy Underhill.
$30 This Item Has Been Sold



James Swan 1/2in Socket Chisel.
This is a bevel-edge socket paring chisel marked with Swan's "Best Tool Steel" Mark. It has a lapped flat, clean back and no damage at all on the nicely shaped handle. IT's a top quality user chisel made by one of America's best makers.
$25 This Item Has Been Sold



Marples 1/4in Carving chisel.
This is a 1/4in side double-bevel carving chisel in excellent condition.
$18 This Item Has Been Sold



Extra-Long PS&W 38in Socket Bevel-Edge Chisel.
This chisel is an interesting combination between a paring chisel and firmer- the blade is thick towards the socket but tapers gracefully to a thin end. The chisel is in exceptional condition without a speck of pitting or discoloration anywhere. The handle is unused. It was made by Peck, Stowe, and Wilcox in Southington, CT. It features the hand-and-hammer logo that PS&W used ca. 1910. IT's an exceptional edge tool made by one of America's best.
$28 This Item Has Been Sold



Marples 1/4in Mortise Chsiel.
This is a tough 1/4in boxwood-handled mortise chisel measuring 12in long overall. The back is completely flat and clean, lapped to 20 grit. It has a sharp bevel and will make an outstanding user. The only flaw is a crack in the brass ferrule.
$28 This Item Has Been Sold



Buck Brothers 1/2in Socket Paring Chsiel.
This bevel-edge chisel has a gorgeous fancy apple handle meant for paring, not for beating on with amallet. It measures just over 12in long overall. The back has a patch of pitting about 1 1/2in from the bevel, but the steel before that is clean and flat. The bevel has no chips and will require minimal work to get into working order.
$24 This Item Has Been Sold



Excellent Marples Cranked 1 1/4in Paring Gouge.
This is a huge patternmaker's paring gouge measuring more than 16in overall. It has a nice boxwood handle that has aged to a deep golden color. The back of the blade has no pitting and the bevel is good and sharp. It's a fantastic example in perfectly usable condition
$30 This Item Has Been Sold



Stanley 3/4in Everlast Chisel.
This example is just over 8in long. The cap has minor wear. The blade's back is reasonably clean with very scattered pinprick pitting, but nothing major.
$22 This Item Has Been Sold



Early 1/4in "Pigsticker" mortise Chisel made by "Jones".
This chisel appears to be on the early side. It is over 10in long overall. The back has some scattered pitting in the 1.5in behind the bevel, more serious pitting after that. It's usable, with a bit of work. It has a lot of steel left in it before you hit that pitting.
$25 This Item Has Been Sold



Extra-Long and Thin Paring Chisel by Stormont.
This long, flexible British paring chisel is in very good working order. The blade has scattered pitting but it's not deep and it laps easily. I spent a few seconds on the back on a 200 grit diamond stone and was able to get the first 3/4in or so flat and almost clean of pitting. It will sharpen up without much work. The blade is extremely thin and flexible, ideal for paring. The beech handle is in excellent condition.
$28 This Item Has Been Sold



Excellent Marples 5/16in Boxwood-handled Mortise chisel.
This is a slightly used 5/16in mortise chisel in very good working order. The back is clean, flat, and polished near the bevel where it counts. Farther back there is a slight area of pitting. The bevel is sharp and in good condition. . The boxwood handle has remnants of the original decal and a black shop mark, along with the usual dings and scratches but no damage.. It's a tough mortise chisel for hard work.
$35 This Item Has Been Sold



Near Mint Marples 1/2in Boxwood-Handled Mortise Chisel.
This chisel is in near mint condition, honed and ready to work out of the box. If it was ever used it was only once or twice. It's a top quality chisel, made for hard work and ready-to-use
$40 This Item Has Been Sold



Near Mint Marples 3/8in Boxwood-Handled Mortise Chisel.
This chisel is in near mint condition, honed and ready to work out of the box. If it was ever used it was only once or twice. It's a top quality chisel, made for hard work and ready-to-use
$40 This Item Has Been Sold



Massive TH Witherby 2in Framing Chisel.
This is a tough, massive chisel that has seen some work, but still has lots of useful decades ahead of it. It's 18in long and nearly 3lbs. The blade is very thick, tapering severely from the socket to the bevel edge. The working face is tool steel laminated to softer steel on top and towards the socket. The tool steel area of the back of the blade has no pitting. There are some dings in the softer steel which don't matter. The back is remarkably clean for a chisel of this size and apparent use. The handle is a stout hooped hickory sort with a nice patina and minimal wear to the hoop. If you need a big chisel capable of the hardest work, this is it.
$55 This Item Has Been Sold



Excellent I&H Sorby 1/8in "Pigsticker" Mortise Chisel.
This chisel is on the short side at only 8in but it's a tiny 1/8in wide so the length shouldn't matter much for such small work. It's in excellent working order with no pitting and a perfect handle.
$30 This Item Has Been Sold



Tough Robert Sorby 1 1/4in Socket Mortise/Framing Chisel.
This is a 15in long, stout chisel with a hooped handle for tough work and a massive blade. The back has scattered light pitting but nothing deep. It shouldn't take long at all to clean up and get into working order.
$30 This Item Has Been Sold



Exceptional Charles Buck 1 1.4in Tang Paring Chisel.
this is a gorgeous edge tool, the likes of which you can'y purchase newly made today at any price. It measures 16in long overall, most of that in it's long, flexible blade. The blade is extraordinarily clean without a speck of pitting. It was recently used and has a nice freshly honed bevel. The back has zero pitting. I quickly lapped it to reveal a nice flat area in back of the bevel, tapering to a slight hollow in the center afterwards- a perfect topography for anyone interested in actually using this gorgeous tool- it will be a cinch to keep it honed and perfectly sharp. It's a top quality American edge tool, in an unusually long size, made in Milbury, MA.
$50 This Item Has Been Sold



Massive Charles Buck 2in Bevel-Edge Tang Paring Chisel.
This is a huge chisel measuring over 17in long overall with most of that in the awesome blade. It's thin and tapered, with beveled edges making it extremely flexible fora chisel of this width. It's probably the finest 2in wide paring chisel I've seen. The handle is near perfect. The chisel blade is clean with little discoloration at all. The bevel is quite sharp and it works reasonably well as-is, taking light cuts easily. The bac, has some minor discoloration, and maybe a few specks of the lightest pitting, but it's in outstanding condition considering the massive amount of real estate on the back available to rust to colonize. It's a gorgeous American edge tool, perhaps more a sword than a paring chisel. It should make a superb worker. Impossible to buy newly made today at any price.
$75 This Item Has Been Sold



Mint Robert Sorby 3/16in Fluted Parting Tool.
This is a Robert Sorby turning tool mad ein Sheffield of high speed steel. It is model no. 832H, as described by the original tag on the handle. It looks no more than a few years old. Sorby still makes this same gouge today and it retails for $75. I doubt very much this one was ever used. It is in mint, Factory-new condition This 3/16in parting tool has a fluted back, ideal for cleanly cutting-off.
$60 This Item Has Been Sold



Robert Sorby Curved Round-Side Scraper.
This tool is in near-mint condition. It was honed and polished and is in perfect working order. It was made by Sorby in Sheffield and can't be more than a few years old. According to Sorby this turning tool is "Designed for blending the parallel side wall and the curved bottom of vessels and boxes together. It is excellent for undercutting the rims of small bowls.". It retails for around $60
$45 This Item Has Been Sold



Outstanding Matched Set of Eight James Swan Turning Tools.
This is a matched set of scarce Swan turning tools, all in excellent condition. These came from the shop of a master woodworker and wood turned and have clearly been well cared-for. All eight have their original hickory handles and matching black enamel towards the tang. From top to bottom in the first photo, the set includes: 1/2in Spindle Gouge, 1/2in triangular scraper, 1in skew chisel, 1/2in round scraper, 3/4in spindle/rouging gouge, 1/2in skew, parting tool, and 3/8in spindle gouge. All eight are sharp and in excellent condition. It's a nice size set for small to medium scale work- a good base set for all sorts of spindle work, tool handles, boxes, etc. I'd add a bowl gouge for faceplate work, but this is otherwise a good, complete starter set. Swan made top-quality edge tools in Seymour, CT. Their tools are held in high regard among users. This should be a fantastic set of turning tools to put to use.
$120 This Item Has Been Sold



Winchester 3/4in Socket chisel.
This is an excellent, usable chisel with a polished back and very sharp bevel. It was made for the Winchester Repeating Arms Co. of New haven, CT
$20 This Item Has Been Sold



Marples Carving tool Set.
This is a six piece Arcord Marples carving tool set in near mint condition in its original box. The set contains a 1/4in skew chisel, 1/2in and 3/8in straight gouges, 1/2in square chisel. 1/8in bent chisel, and a 1/4in V carving tool.
$50 This Item Has Been Sold



Matched trio of Three Marples Boxwood-Handled Paring Gouges.
These three gouges are in excellent condition without damage. The bevels have been honed and polished and are very sharp, ready-to-work. These are great paring or coping gouges to put to work.
$80 This Item Has Been Sold



Superb Marples 3/4in Bevel-Edge Socket Chisel.
This is an excellent user chisel with a lapped flat back and a freshly honed bevel. The handle has minimal wear. It measures 10in long overall.
$26 This Item Has Been Sold



E.A. Berg, Eskilstuna, Sweden, 3/8in Socket Chisel.
This is a top quality Berg chisel with most of the original decal on the handle. The back has been lapped and the bevel is sharp. It has minor discoloration, though the handle has no wear, just tiny bits of missing finish. It's an excellent example of this highly sought-after maker.
$40 This Item Has Been Sold



Warren Cutlery Co. Carving Kit.
Warren makes some top-quality whittling and carving handles. This is a kit with a near mint handle, and 12 blades of various sizes including a hook blade, skew blade, and some straight gouges.
$20 This Item Has Been Sold



Scarce Buck Brothers 1in No. 1 Flat Carving Chisel.
This is a flat, no. 1 sweep double-bevel carving tool in excellent working condition.The blade is clean and the bevel very sharp. he handle has a small chip but is otherwise fine. It's a scarce profile in great usable condition.
$26 This Item Has Been Sold



Excellent Buck Brothers no. 20 Bent Gouge.
This is a steep 3/4in wide bent gouge made by Buck. It has its original apple handle which is in excellent condition. The blade has some spots of discoloration on the inside but no pitting. The bevel is reasonably sharp. It's a very scarce profile in great shape.
$26 This Item Has Been Sold



Excellent Buck Brothers no. 40 1/4in Curved V Tool.
This is an excellent example with no pitting at all on the inside faces. It is ground with the "wings back" profile. It's a great example of this very useful carving tool.
$30 This Item Has Been Sold



Buck Brothers 5/8in no. 7 Carving Tool.
This gouge is in excellent condition with a nice clean blade and perfect handle.
$24 This Item Has Been Sold



Buck Brothers 5/8in no. 7 Carving Tool.
This gouge is in excellent condition with a nice clean blade and perfect handle.
$24 This Item Has Been Sold



Mint Swiss-Made no. 5 Flat 7/8in (23mm) Gouge.
This gouge is in mint condition with a deadly sharp bevel. $47 retail
$32 This Item Has Been Sold



Scarce Addis no. 4 Flat 1in Gouge.
This is a super-flat no. 4 London Pattern Gouge in very good condition. It has a boxwood handle with a small, tight check. The blade has no pitting, just very light discoloration. It's a very scarce pattern made by Ward for SJ Addis made in the1880s.
$26 This Item Has Been Sold



Brodie 1/2in Boxwood handled Paring Chisel.
This is a thin, fine chisel with a solid boxwood handle in excellent condition. The bevel is sharp and the back is fairly clean with a few areas of very light pitting. The area closest to the bevel is clean. It will make a fine user.
$22 This Item Has Been Sold



Stanley no. 919 12in Brace.
This is a larger brace for boring big holes and turning large screws. It is in very good condition and works perfectly. The ratchet is smooth, the chuck and jaws have no damage. The wood ( think cocobolo) is near perfect and has all original finish. The frame has maybe 60% original nickel, the rest is lightly patinated. It's a solid user brace in a hard to find 12in size.
$40 This Item Has Been Sold



Scarce Unused Mathieson Reamer.
This 8.5in long tapered reamer has a square shank fo ruse with a brace. reamers aren't scarce, but finding one in unused, undamaged condition is very hard. This one has a full taper right to the sharp point. Almost all I fins are broken at some point along the way. This one has a crisp Mathieson mark. It has a maximum width of about 11/16.
$12 This Item Has Been Sold



Small English Pump Drill.
This drill works smoothly and features a brass chuck capable of holding bits around 1/16in to 1/8in.
$12 This Item Has Been Sold



Mathieson Scotch Brace w/ Bits.
This is a good iron brace with a rosewood head. The chuck spring is operated by means of a lever. It will accept virtually any tapered square tang bit. It comes with 21 various bits including center, gimlet, nosing, shell, reamer, countersink, and an interesting tapered gimlet, all in usable condition. It's a un, simple brace to use.
$60 This Item Has Been Sold



Wilson, London Scotch Brace w/ Bits.
This is a early all iron brace. The chuck spring is operated by means of a lever. It will accept virtually any tapered square tang bit. It comes with 16 various bits including center, gimlet, nosing, shell, reamer, cand countersinks, all in usable condition. It's a fun, simple brace to use.
$60 This Item Has Been Sold



Excellent Craftsman-Branded Push Drill.
This drill was likely made by Millers Falls for Craftsman. It is in its original box, in excellent working order, and containing al eight, perfectly unused bits in its cartridge handle. the bits are the less common X shank bits. The full set of bits is worth the purchase price alone, considering their rarity and demand among users. Small push drills like this are among the best ways to bore tiny holes quickly
$30 This Item Has Been Sold



Stanley no. 993 Corner Brace.
This brace is in very good user condition. It works smoothly. There is some finish loss on the frame. The cocobolo handles are in excellent condition. The chuck and haws have no wear.
$40 This Item Has Been Sold



Stanley no. 923 10in brace.
This is a very good working example of the ubiquitous Stanley 923, the standard 10 in brace. If you want a good, general-purpose brace to put to work, this is it.
$24 This Item Has Been Sold



Small Stanley no, 945 8ni brace.
This is a smaller 8in brace, perfect for quickly boring smaller holes, driving screws, or using with a countersink. It is in very good working order. the ratchet is smooth, the pad spins easily without slop. The jaws are perfect.
$28 This Item Has Been Sold



Interesting Chantrells Patent Brace.
This is a very nice usable example of Chantrell's patent brace. It's a good-looking, unique brace with a rosewood pad and handle, brass rings at the ends of the handle, and the interesting patent chick. Its' an 8in brace, a nice size to use for quickly boring holes, driving screws, etc. It works perfectly and has a great look to it.
$40 This Item Has Been Sold



Small Rosewood Handled Tapered Reamer.
This small reamer was made by Holt in Springfield, MA. It has a gorgeous rosewood handle and nice sharp edges. This might be a small luthier's or gunsmith's reamer.
$25 This Item Has Been Sold



Excellent Burley, Glasgow Scotch Brace.
This brace looks almost exactly like the Mathieson I have listed. This one has a gorgeous rosewood head without any damage. The chuck spring is actuated by means of a heart-shaped lever on the chuck. The brace accepts virtually any tapered square shank. It is paired with an assortment of 20 usable bitstock tools including center bits, gimlets, countersinks, nosing and shell bits, and a tapered reamer.It's a fun tool to use.
$65 This Item Has Been Sold



Nice British Gents Brace w/ Bits.
This gentleman's brace has a nice rosewood pad and ball-shaped handle. The underside of the quill is marked "Herberts & Sons" I believe. The chuck has a screw-stop and is capable of holding about any tapered square shank bit. It comes with an assortment of 20 usable bitstock tools including center bits, gimlets, nosing and center bit, various countersinks, etc. It's a fun tool to use
$60 This Item Has Been Sold



Excellent Millers Falls no. 1 hand drill.
This is an excellent working example of the Millers Falls number one. The main gear and frame retain most of the original paint the gear action is perfectly smooth. The chuck works perfectly. Its Cocobolo handle has an assortment of original fluted bits most with their original bluing it's exceptional working example.
$55 This Item Has Been Sold



Scarce Millers Falls no. 3 hand drill.
This is a very good example of a scarce Millers falls drill. The number three is similar to one except towards hollow handle. This example is in good working order. The gears are smooth. It retains most of its original paint. The chuck works well. Its Hollow tool handle screws onto main shaft and is released with a pushbutton. It's a good working example.
$45 This Item Has Been Sold



Mint and complete number 59 Stanley dowel jig.
This is a complete example with the addition of three properly size drill bits, and one extra depth stop. It is in mint, unused condition. It contains all six original colors. It is in its original box. It can be used for creating accurate dowel and mitered joints, as well as boring mortises.
$35 This Item Has Been Sold



Stanley number 48 Auger bit depth gauge.
This is a clean, nearly perfect example. It clamps to an auger bit to allow you to accurately bore holes to a specific depth.
$12 This Item Has Been Sold



Fray/Stanley no. 106 10in. Ratchet Brace.
This brace is marked both Fray and Stanley which tells me it was made around about 1909 when Stanley acquired the Fray business and brace designs. This is a very good example with most nickel plating- a bit is missing under the quill and some on the ratchet housing, but the rest is bright. It has crisp Stanley and Fray marks. The ratchet and chuck work perfectly. The pad and handle spin easily with minimal slop. It has very nice rosewood handles. It's a good looking, working brace in a useful general purpose size.
$40 This Item Has Been Sold



Stanley 945A 12in Brace.
This is a big 12in ratchet brace in excellent working order. It has almost all original finish and works perfectly.
$35 This Item Has Been Sold



Tiny Millers Falls no. 14 6in Brace.
This is a nice working example of Barber's improved brace. It's a simple, lightweight 6in brace with nice dark cocolobo on the head and handle. It's fairly clean with some missing finish. The jaws are in good shape, the wood has no damage at all. It will work well for quickly boring small holes, driving screws, countersinks, etc.
$45 This Item Has Been Sold



Interesting Fray 10in Ratchet Brace.
This brace was surely made by Fray, or perhaps Stanely right after the 1909 Fray acquisition. It has the model no. 4410 on the frame and is stamped for the Cleveland, OH hardware firm Mcintosh & Heather. There are several other examples of similar braces documented. The brace has the two-part Spofford style cocobolo handle with pewter rings. The ratchet works well and the jaws are in good shape. The cocobolo pad spins easily and has barely any slop at all. It's a fine user brace, a bit on the unusual side.
$40 This Item Has Been Sold



Exceptional Goodell-Pratt no. 5 1/2B Two-Speed Eggbeater Hand Drill.
This is the finest example I've ever come across of this particular drill. It has almost perfect paint on the gear and body. All of the nickel remains on the transmission. The mushroom shaped breast pad and handle have all finish as well. The gear action is perfectly smooth without slop. The transmission shifts from low (1:1) to high (3:1) as smooth as I've ever encountered in this model. The chuck works perfectly. It's a gorgeous user hand drill for small to medium duty work.
$75 This Item Has Been Sold



Mephisto 2in Auger Bit.
This is a short 2in wide single-spur auger bit. It's an unusual size in perfectly usable condition. It has a single lead screw and measures 6in in length.
$10 This Item Has Been Sold



Rare Set of Six Russell Jennings Doweling Bits.
Doweling bits look like normal auger bits but are only 5in long. This is a matched set of six in sizes 3-8. All are in very good or better condition.
$25 This Item Has Been Sold



Tiny Stanley Spoke Pointer.
This is a tiny spoke pointer for a brace in excellent, unused condition. It can accept stoc up to 3/4in wide. It also makes a hand pencil sharpener
$10 This Item Has Been Sold



Excellent J. Bee Plated "Sheffield" Brace with Bits.
This is a very good working example fitted with an assortment of usable bits. The brace itself was made by Bee In Sheffield. It has a plated beech body wit just a few small chips but no cracks or checks at all. the lignum head is near perfect with a bold, thin sapwood streak. It has no wobble at all, which is remarkable. The chuck spring is perfectly tight and will grip just about any tapered square shank bit. The brace is a perfect user. It comes with an assortment of 19 bits including center bits, gimlets, countersinks of various kinds. Reamers, nosing bits, and a few shell bits. All are usable. Wooden braces are a lot of fun to use and quite useful in the shop to bore smaller holes, drive screws, run a counter sink, etc. they are beautiful, versatile tools to have in your kit.
$100 This Item Has Been Sold



Very Good"Sheffield" Brace with Bits.
This is a very good working example fitted with an assortment of usable bits. The brace itself was made by W. Staley, as marked on the brass chuck. I assume it was made in Sheffield, but it could be Birmingham or even American, though I doubt the last. It has a nice beech body with jone single tight check near the head. Otherwise it just has some dings and scratches. the lignum head is in excellent condition and moves easily. The chuck spring is perfectly tight and will grip just about any tapered square shank bit. The brace is a perfect user. It comes with an assortment of 24 bits including center bits, gimlets, countersinks of various kinds. Reamers, nosing bits, screwdrivers, and a few shell bits. All are usable. Wooden braces are a lot of fun to use and quite useful in the shop to bore smaller holes, drive screws, run a counter sink, etc. they are beautiful, versatile tools to have in your kit.
$90 This Item Has Been Sold



Very Good, Early "Sheffield" Brace with Bits.
This is a very good working example fitted with an assortment of usable bits. The brace itself was made by Maw & Staley, a Sheffield manufacturer working ca. 1823-28 according to Ke Roberts book "Some 19th Century English Woodworking Tools".the beech frame has an assortment of dings and scratches, but no chips or cracks at all. the head is rosewood I believe, and has stunning grain and color. It's perfectly tight , moving easily with zero wobble which is remarkable. The chuck spring is perfectly tight and will grip just about any tapered square shank bit. The brace is a perfect user. It comes with an assortment of 24 bits including center bits, gimlets, countersinks of various kinds. Reamers, nosing bits, screwdrivers, and a few shell bits. All are usable. Wooden braces are a lot of fun to use and quite useful in the shop to bore smaller holes, drive screws, run a counter sink, etc. they are beautiful, versatile tools to have in your kit.
$100 This Item Has Been Sold



Stanley SW Era Fray Spofford No. 110 10in Brace.
This is one of the last Spoffords made by Stanley- it has a SW era logo on the frame and the "FRAY no. 110" mark as well. It has a nice tight head and excellent chuck with little wear. The handle has a few dings and one ring looks like it was repaired. It's tight and perfectly usable.
$45 This Item Has Been Sold



Early Fray & Pigg 8in Spofford Brace.
This is an early example with Spofford patent on the frame along with Fray & Pigg, Bridgeport. The rosewood head is tight. The chick has little wear. It's quite clean overall. The handle's pewter rings have been repaired with wire- the repair is perfectly stable and the brace will be a fine worker.
$40 This Item Has Been Sold



Square-Shank Three Jaw Chuck.
This is a handy little three jaw chuck with a tapered square shank for use in a two-jaw drill or brace. It can accept bits up to 3/8in. It's in mint condition. This is a terribly useful little tool to have on-hand at all times.
$15 This Item Has Been Sold



small British Pump Drill.
This drill works perfectly with a nice smooth action and no wobble. The head and handle are made form a close-grained, burly wood. The brass chuck can hold tiny bits in tis four jaws.
$15 This Item Has Been Sold



Very Good Millers Falls no. 2 Eggbeater Hand Drill.
This is a perfect working example. The handle has all original finish, as does the frame. The main gear is missing some read paint but not much. The chuck operated perfectly. The gear action is perfectly smooth with zero slop. The handle is a tad bit loose, but not enough to affect use. It's a great working drill for almost any size work.
$45 This Item Has Been Sold



Excellent Stanley 2101A Yankee Heavy-Duty Brace.
This is an excellent example with clean, complete handles, most original plating, and a perfect working ratchet and chuck. The ratchet was gummed up- I cleaned it out and lubricated it. It spins easily making a satisfying soft "clicking" as it rotates. The chuck jaws have no wear. It's a top quality heavy-duty brace in a large size perfect for boring large holes, driving big screws, etc.
$75 This Item Has Been Sold



Stanley Yankee no. 2101A 10in Brace.
This is a good, working Yankee brace, one of the better heavy-duty designs ever made. It has a nice smooth ratchet, damage free jaws, and a nice tight pad and handle. The ratchet was gummed up with the usual green goo when I found it. I fully disassembled it, cleaned, and re-lubricated it. It's in good working order now.
$50 This Item Has Been Sold



Excellent Millers Falls no. 731 12in HLold-All Brace.
This is one of Millers Falls' most useful braces in an unusually large size. The holdall chuck can grip virtually any type of bit that will fit in its chuck. This example is in excellent condition with perfect wood, a nearly complete decal on the handle, excellent chuck, and almost all original nickel on the frame.The jaws have no damage and the ratchet works smoothly in both directions. It's a top-quality brace in a useful larger size.
$60 This Item Has Been Sold



Scarce PS&W No. 104 6in Ratchet Brace.
This is a tiny little ratchet brace with a 6in sweep made by Peck, Stowe, and Wilcox in Southington, CT. The brace is in very good condition and works perfectly. It has a nice tight cocobloo head and handle, neither with andy damage. It has a nice overall patina without rust or pitting. The ratchet works easily and the jaws have no damage. It's an unusual, perfectly usable, small 6in brace, perfect to add to a collection or use with small bits, countersinks, etc.
$65 This Item Has Been Sold



Heavy-Duty 12in Stanley No. 813 "Type 11" era Ratchet Brace.
This is a large 12in brace made ca. 1910-18 based on the "V" logo on the chuck shell. This is a very similar brace design to the heavy duty Samson and Lion braces made by PEXTO and Millers Falls. This example is in very good condition overall. It has some minor finish lott but is mechanically perfect. The cocobolo handle and pad operated smoothly with little play. The ratchet and chuck work perfectly. The frame has some missing nickel which is purely cosmetic.If you need a large brace to drive big screws or bore large holes this is a great choice.
$45 This Item Has Been Sold



Excellent Hargrace 34in Fixed Hollow Auger.
This is an interesting hollow auger in excellent condition. Proceeded by a spoke pointer, it will cut 3/4in round tenons. It has its original depth stop. It's a two-piece design with the entire base able to be removed from the top frame by loosening the knurled thumbscrew ont he side. This allows the depth stop to completely wrap around the frame so it can't get lost. IT has almost all original finish and a nice clean square tang with no damage. It's an excellent working example in a desirable size.
$30 This Item Has Been Sold



Usable Spoke Pinter.
This is a decent, usable spoke pointer with a 3in maximum diameter. It has an adjustable depth stop which is a bit unusual. The blade has some pitting on the back, but it will be usable with a bit of work.
$20 This Item Has Been Sold



Interesting Adjustable Bench Dog.
This bench dog is set in to the bench top. It has a 1in square dog with one toothed surface. It is raised and held in place by means of a spring-loaded pin the arids in a slot in the stop. Once raised it will not lower without the spring being depressed. It is completely unmarked.
$20 This Item Has Been Sold



Veritas Honing Guide.
this is the original Veritas honing guide in excellent, nearly unused condition. I've been using this honing guide for more than 10 years and It's never work out.
$20 This Item Has Been Sold



Small handled Hand Vise.
This isa useful small hand vise with a handle for better grip. it can be used to hold small bits and blades when grinding and honing. It's a very useful tool to have on hand. It is unmarked, and not terribly old.
$20 This Item Has Been Sold



Well-Made Gunstock Scraper.
While it's called a gunstock scraper, this tool is useful for scraping just about any curved or flat surface, much like a spokeshave. It measures 11in overall with a 1 3/4in wide blade set into the brass mouthpiece. It's completely usable and quite nice looking.
$24 This Item Has Been Sold



Well-Made Gunstock Scraper.
While it's called a gunstock scraper, this tool is useful for scraping just about any curved or flat surface, much like a spokeshave. It measures 12in overall with a 1 5/8n wide blade set into the brass mouthpiece. It's completely usable and quite nice looking.
$24 This Item Has Been Sold



Pair of Ovolo Sash Templates.
This is a very nice pair of sash templates for working sash bars with a 5/8in flat ogee profile. Both are made of beech. One has brass ends and is used to cope the end of a bar. The other is a saddle type used to cut a 45 degree mitre at the end. Both are in used, but excellent condition.
$25 This Item Has Been Sold



Starrett 4in Outside Calipers.
These calipers are in very good condition with a few tiny scratches and an owner's mark the only drawbacks. The hinge is perfectly tight.
$12 This Item Has Been Sold



Exceptional 3/4in bead by Lindsey, Huntington MA.
This 3/4in side bead is in exceptionally clean, crisp condition. The body has no damage and all of the corners and edges are sharp and free of damage. it barely has a ding or scratch on it. The boxing is especially deep and in perfect condition. The blade has no pitting on the back at all. this plane bears the mark of the late 1800s Worcester, MA hardware dealer White and Conant on the heel. It should make an exceptional used for larger moldings for base and casing moldings.
$26 This Item Has Been Sold



1/2in Cove Molding Plane by Turner, Sheffield.
This is a very good, usable cove molding plane made by Turner ca. 1846-88. The plane is in very good condition overall. The cabinet pitch blade has some specks of pitting but it is generally flat and clean. The mouth is very tight- there is a small chip right next to the depth stop. The body has an even, honest patina and no damage other than the expected dings and scratches. It looks like a fine user molding plane
$35 This Item Has Been Sold



Excellent Hammond no. 3 Carpenters Hatchet.
This is a small 1.5lb hatchet with a hammer head on one side and 4in hatchet head on the other. It's a knife edge hatchet great for splitting, trimming, and small tasks. It's a useful little hatchet to have around for trimming and driving pegs or for splitting kindling. The bit is sharp and I've use it a bit and have always enjoyed it. There are no chips or damage to the edge. It's a top quality edge tool in great user shape.
$35 This Item Has Been Sold



Excellent 12oz Cheney Carpenters Hammer.
This is a classic carpenter's hammer with a slightly domed bell head and the long, sweeping horns that run parallel to the handle . This is not a framing or ripping hammer. It has an elegantly tapered hickory handle that is perfectly tight and original. The face and claws have no damage or wear whatever. It's the perfect size for bench work.
$25 This Item Has Been Sold



Stearns no. 112 Saw Set.
This is a Stearns patent bottom-lever pliers type saw set. It is fully nickel-plated and almost 100% of the original finish remains. It is complete and in excellent working order.
$25 This Item Has Been Sold



Stanley no. 53 Spokeshave.
This is a "type 11" era shave with the V logo dating it to 1910-18. The shave is in very good working order. It has minor wear and some 90% of the original japanning. The blade is long and has no pitting. The springs that open/close the mouth are strong and the mechanism works easily. It's an excellent shave to put to use- my personal favorite among the Stanley metallic shaves
$30 This Item Has Been Sold



Excellent Small Handled Hand Vise.
This is a very small hand vise with 1 1/8in wide jaws, attached to a wooden handle for easy use. It makes for a precise, easy to hold tool. This is an ideal tool to grip small bits and blades when grinding and honing. There is a maker's mark that I can't. What looks like a chip in one jaw is actually a small channel cut, I presume, to allow it to more easily hold small diameter bits. This is a rare pattern to find, and an exceptionally useful tool to have on-hand.
$35 This Item Has Been Sold



Excellent Stanley SW Era no. 104 1/2 14in Level .
This is a smaller plumb and cherry level with brass caps mad eduring the Sweetheart era. It is ine xcellent condition with no damage and a nearly perfect original decal. It's in excellent working condition.
$25 This Item Has Been Sold



Small seymour Smith Spokeshave.
This shave has straight handles and a 1 3./4in blade. There is a good bit of life left in the blade. It should be a god one to use for fine work.
$25 This Item Has Been Sold



User Stanley 151 Spokeshave.
This is an English Stanley 151 in good user condition. It has about half of its original finish but the blade is in great shape and the adjusters work fine. It should be an excellent worker.
$25 This Item Has Been Sold



Crisp Marples Beech Spokeshave.
Unlike the vast majority I see this shave has seen little use and has almost no wear ata ll around the mouth. The blade is 2 3/4in wide and is in excellent condition without aty pitting. The beech body has almost perfect original finish. It should be an excellent worker. Wooden shaves are different than their metallic cousins. With their bevel-up blades they work exceptionally well on end grain.
$30 This Item Has Been Sold



Crisp Marples Beech Spokeshave.
Unlike the vast majority I see this shave has seen little use and has almost no wear ata ll around the mouth. The blade is 2 3/4in wide and is in excellent condition without aty pitting. The beech body has almost perfect original finish. It should be an excellent worker. Wooden shaves are different than their metallic cousins. With their bevel-up blades they work exceptionally well on end grain.
$30 This Item Has Been Sold



Excellent British Glass Cutter.
This is a rosewood handled Newth patent diamond glass cutter sold by R. Graham, Edinburgh. It's a beautifully made tool and has a very appealing patina, as well as a shiny diamond sliver at its business end.
$15 This Item Has Been Sold



Eclipse 77 Saw Set.
This is the cast iron version with the thin plunger. It has almost all of its red paint in the throat, a smooth action, and strong spring. These are generally considered one of the better user sawsets for fine toothed back saws, hand, and panel saws. It features the two-part clamp-and-set action very similar to the Stanley 42x.
$30 This Item Has Been Sold



Eclipse 77 Saw Set.
This is the English-made cast bronze version with the regular plunger. It has a nice clean anvil, a smooth action, and strong spring. These are generally considered one of the better user saw sets for fine toothed back saws, hand, and panel saws. It features the two-part clamp-and-set action very similar to the Stanley 42x.
$25 This Item Has Been Sold



Eclipse 77 Saw Set.
This is the English-made cast bronze version with the regular plunger. It has a nice clean anvil, a smooth action, and strong spring. These are generally considered one of the better user saw sets for fine toothed back saws, hand, and panel saws. It features the two-part clamp-and-set action very similar to the Stanley 42x.
$25 This Item Has Been Sold



Handy German Multi-Tool.
This tool has a hammer head and six bits in its hollow head- a gimlet, file, chisel, screwdrivers, and a saw blade. It was made by Solingen in Germany. Certainly usable, it's also a curiosity.
$15 This Item Has Been Sold



Small 4oz Stanley SW Era Cross-Peen hammer.
This hammer is clean and crisp with a bold Sweetheart Logo. It has its original hickory handle. The flat face and cross-peen are free of damage or chips.It's ideal for driving small nails.
$25 This Item Has Been Sold



Excellent William Johnson 2 1/2in Maple SPokeshave.
This shave was made by WJ in Newark, NJ. It is in excellent condition overall. The blade has no pitting at all. The mouth has little wear. There is no damage to the body. It's a fantastic user wooden spokeshave.
$35 This Item Has Been Sold



Excellent William Johnson 2 1/2in Boxwood Spokeshave.
This boxwoodshave was made by WJ in Newark, NJ. It is in excellent condition overall. The blade has no pitting at all. The mouth has little wear. There is no damage to the body. It's a fantastic user wooden spokeshave.
$35 This Item Has Been Sold



Good User Router.
This is an unmarked router, likely made as a project by a patternmaker or other craftsman.. it has some small pock marks in the sole from the casting process. It holds a stout blade just shy of 1/2in wide. It's a bigger router than a stanley 71 or its equivalents. The mahogany handles are in very good shape. It should be a fine user.
$45 This Item Has Been Sold



Excellent British "Ultimatum" Mortise Gauge.
This is a perfect working gauge. The brass beam has no defects letting the brass-clas ebony had slide freely. The marking pins are as long as I've ever seen on one of these and quite sharp. The adjusting pin moves easily. The head locks secure. There is a single very small, tight check in teh ebony head. It's a gorgeous gauge and a luxury to use.
$55 This Item Has Been Sold



Exceltional Cross-Peen hammer.
This is a nice small 3 or 4 oz. cross pein with two clean faces, and a nicely shaped decorative handle. It's an ideal hammer for driving small tacks and nails.
$25 This Item Has Been Sold



Massive pair of 7 inch pinch dogs.
This pair of pinch dogs is not for bench use, rather it would work well outdoors working logs. They are 7 inches long and appear hand-wrought.
$12 This Item Has Been Sold



Working set of 13 pinch dogs.
This is A set of 13 inch dogs varying in size from 3 inches to 1 inch. None are marked some appear very early and are clearly hand wrought.
$25 This Item Has Been Sold



Stanley number 55 curved spokeshave.
This is a "type 11" era number 55 dating to circa 1908 1918. It has virtually no japanned finish left on the frame but there is no rust at all. It has a long original blade with the logo. There is no pitting, it does have some discoloration. It should be an excellent user.
$40 This Item Has Been Sold



Stanley number 55 curved spokeshave.
This is a "sweetheart" era number 55 dating to circa 1920. It has almost all of its japanned finish left on the frame and there is no rust at all. It has a long original blade with the SW logo. There is some pitting, and it does have some discoloration. It should be an good, usable shave.
$30 This Item Has Been Sold



Exceptional Stanley number 51 spokeshave.
This shave is in excellent condition with all original japanned finish. The blade is long, nearly full-length. It has no pitting and a bold Stanley trademark. It's a simple gull-wing spokeshave in excellent user condition.
$26 This Item Has Been Sold



Exceptional Stanley number 51 spokeshave.
This shave is in excellent condition with all original japanned finish. The blade is long, nearly full-length. It has no pitting and a bold Stanley trademark. It's a simple gull-wing spokeshave in excellent user condition.This is a later model wit3h the checkered handle and notched Stanley logo.
$26 This Item Has Been Sold



Excellent Stanley Sweetheart era number 151 spokeshave.
This shave is an excellent user condition. It has a long, clean blade with a bold SW logo. The frame has about 90% of its original japanned finish. It should be an excellent user.
$35 This Item Has Been Sold



Exceptional, Near-Mint Stanley no. 151 spokeshave.
This shave is near mint condition with all original finished, and a perfectly clean, sharp blade. This is one of the most popular models among user. It should be an exceptional worker.
$40 This Item Has Been Sold



Very good Stanley number 54 adjustable mouth spokeshave.
This is an early example with the circular Stanley logo. It has about 50% of its original japanned finish. The springs that operate the throat are strong. The blade has a lot of life left and is in excellent condition. This is the straight handled version of the more common 53 gull wing spokeshave.
$25 This Item Has Been Sold



Exceptional Stanley number 53 spokeshave.
This is an early example with the circular logo on the blade. It has at least 95% of its original japanned finish. The blade is near full-length, Sharp, and has no pitting, it is an excellent user spokeshave, And a favorite among users myself included
$30 This Item Has Been Sold



Starrett adjustable machinists scraper.
This scraper is in good working order. It has an adjustable head which holds the blade at a specific angle. The original blade is in good shape without hitting.
$20 This Item Has Been Sold



Very good, usable 8 inch drawknife.
This drawknife was made for a hardware store that used to logo "Our Own". It was likely made by one of the larger manufacturers like Witherby or PS& W. It remains in a very good user condition. The blade is long and quite sharp. It has no pitting on the back. The handles are tight, Though they are covered with some sort of paint. It's a solid a user drawknife in very good working order.
$35 This Item Has Been Sold



Excellent Stanley 42X pistol grip sawset.
This 42X has at least 95% original japanning, and almost all of nickel plating on the unpainted parts. The action is smooth, the spring is strong. There is no damage or wear to the handle or plunger. It looks like a solid user sawset in great shape.
$60 This Item Has Been Sold



Small handled hand vice.
This is a small hands vice with 1 3/8 inch wide jaws. It is an excellent working order. The jaws align precisely when closed.. It has no wear or damage. It is attached to a beech handle to make it easier to hold. A small hand vise like this is extremely useful to have in the shop- especially so for holding small blades while grinding and honing.
$25 This Item Has Been Sold



Very good beech spokeshave.
This shave was made by Charles Henry in Sheffield. It has a 3 inch wide blade and measures 12 inches overall. The mouth has no wear at all and is still tight. The blade is full-length. It has scattered pitting but should sharpen up easily. There is some paint residue and a bit of adhesive on it but is otherwise in excellent user condition.
$24 This Item Has Been Sold



Very good Stanley Sweetheart era no. 25 8 inch bevel..
This is a sweetheart era Stanley made in Canada. It has most of the original Stanley decal on the Rosewood stock. It has a good straight blade with minor pitting. The Rosewood is perfect with crisp, sharp corners. The brass is nice and patinated. It works perfectly and should make an excellent user.
$24 This Item Has Been Sold



Stanley number 42X sawset.
This is a very good, usable example. It has most of his original black finish. The nickeled pieces have some even, honest discoloration from age and use. The plunger and anvil are clean with no damage. The spring is strong. It should be a good working sawset.
$55 This Item Has Been Sold



Very good small hand vise.
This hand device has 1 1/4 inch wide jaws. It has most of its original black finish. Is in excellent working order. A small hand vise like this is a very handy tool to have, ideal for holding small blades and bits when sharpening, holding, and grinding.
$25 This Item Has Been Sold



Excellent PEXTO 8 inch folding handle draw knife.
This tool was made by PS& W in Southington Connecticut. PEXTO is well known for making top-quality woodworking and other mechanics tools. This drawknife has folding handles that allow it to be stored compactly and also allows the handles to move out of the way while grinding and honing, a very nice feature. The handles can be locked tight when use. The blade is still long and has a very clean back with only the smallest scattered bits of pitting. Should be a great worker.
$40 This Item Has Been Sold



Small 4 ounce ball peen hammer.
This tiny hammer is nice clean faces and a good Hickory handle. It is marked Cornwell.
$12 This Item Has Been Sold



Swiss-Made hand Scorp.
This is a small one-handed scorp made by Pfiel, intended to roughed out concave surfaces like bowls, spoons, etc. It is in new, unused condition.
$30 This Item Has Been Sold



8 inch drawknife made for Worth.
This drawing life was made by or for worth. It is int good, usable condition. The blade is sharp and there are no chips in the bevel.. It has a lot of life left in it. There is minor pitting scattered around the back but nothing that will stop it from being a good user. The handles are perfectly tight.
$25 This Item Has Been Sold



Early James Swan 8 inch drawknife.
This is an early Swan tool with a mark I don't call ever seen before. It has an oddly shaped 8 inch wide blade. The bevel is very sharp and ready to use. There until no chips or dings on th ebevel. The back has no pitting and is quite clean. The handles are in excellent condition. It should make an exceptional worker drawknife.
$40 This Item Has Been Sold



Medium Size Joiners Mallet.
This is a wel-made medium size mallet weighting about 1.5lbs. It has some wear and tear but remains perfectly usable. It has a nice look to it.
$15 This Item Has Been Sold



Large Joiners Mallet.
This is a wel-made large mallet weighing about 3lbs. It has significant wear and tear but remains perfectly usable. The head is made of burled hickory or oak.. It has a nice look to it.
$15 This Item Has Been Sold



PEXTO 16oz Carpenters Hammer.
This is just a good, medium sized carpenter's hammer well suited for bench work. It was made by Peck, Stowe, And Wilcox in Southington, CT. The hickory handle is nicely shaped and tight to the head. The face is clean without any chips.
$22 This Item Has Been Sold



Excellent 7.5lb Bench Anvil.
This is a very well-made all steel anvil. It looks like it might have been cut and shaped from a steel beam of some sort. The table is flat and clean and has both a hardy and pritchel hole. The horn is nicely machined and quite smooth with no damage. It's the perfect size to put on the bench.
$50 This Item Has Been Sold



small 8oz Carpenters Hammer.
This is a small, unmarked carpenters hammer with a freshly ground face and nice long claws. The handle is in excellent condition and has a nice waisted shape. It's a perfect smaller size for bench work.
$15 This Item Has Been Sold



16oz Carpenters Hammer.
This is a medium sized, carpenters hammer with a clean face and nice long claws. There is a light maker's mark that i cannot read. The handle is in excellent condition and has a nice waisted shape. It's a perfect smaller size for bench work.
$15 This Item Has Been Sold



Pikes Patent Saw Jointer.
This saw jointer was patented by Edwin Pike and produced by the Pike Mfg. Co. in Haverhill, NH. The Oct 24, 1893 patent covers a jointer that can hold almost any sort of file, triangular, square, rectangular. It is in good working condition with most original japanning and an early braze repair to one bracket.
$20 This Item Has Been Sold



Stanley no. 207 Bench Stop.
This is a toothed bench stop with a spring-clip to keep it in place. It fits in a 5/8in hole. It is in near mint, unused condition.
$15 This Item Has Been Sold



Planemakers Pull-Stroke Edge Float.
This is a 3/16in wide pull-stroke edge float for planemaking. It was hand-cut and has some irregularity in the teeth which is rumored to be an advantage over machine-cut. It has a nice mahogany handle. It is sharp and usable and came from the bench of an accomplished planemaker.
$35 This Item Has Been Sold



Excellent Stanley no. 65 Chamfer Shave.
This is an early example with the circle logo including the Feb 27, 1883 patent date. The blade is long and clean without pitting. This shave has some 95% or more original japanning on the body, guides, and screws. Both original chamfer guides are present. It's a perfectly usable example of a highly desirable shave in top condition
$90 This Item Has Been Sold



Very Godo Beech Spokeshave.
This shave has a 2 1/2in wide iron in excellent condition without any pitting at all. The beeck body has an owner's mark or shop mark but is otherwise in excellent condition. The blade is sharp and the bevel is free of chips and cracks. It looks to be an outstanding user.
$26 This Item Has Been Sold



W. Marples, Sheffield Large Beech Spokeshave.
This is a large shave with a 3in blade measuring more than 12in wide overall. It has handles that can be gripped by a person with large hands, unlike most wooden shaves. It was made by Marples for the New York hardware dealers A Hield & Co. on CHambers St. The dual stamp, one under each handle is interesting. the blade has no pitting but it does have a few nicks that will need to be ground out. Otherwise its' in great shape and should work well.
$22 This Item Has Been Sold



Incra Precision T-Rule.
This example is in excellent, slightly used condition. This is the 6in imperial version.
$20 This Item Has Been Sold



Small, Unmarked 4oz Brass hammer.
This small hammer has a very nice handle and is in good working order
$12 This Item Has Been Sold



Excellent Stanley no. 151 Spokeshave.
This is an excellent example with at least 95% japanning and a long, clean blade without pitting. It's in perfect working order, one of the best I've found. It's a very easy shave to use and always in high demand among users.
$45 This Item Has Been Sold



Excellent, Ready-to-use Stanley SW Era no. 53 Spokeshave.
This shave is sharp, honed and ready to work. The iron has a polished back without any pitting. The frame has at least 95% japanning. The springs are strong and the adjustable mouth moves easily both ways. It's an excellent example of my favorite metallic spokeshave to use.
$40 This Item Has Been Sold



Stanley no. 73 Razor-Edge Spokeshave.
this is a very good, usable example of this scarce shave. According to Walter's Guide this shave was made only 1905-1917. This is essentially a metallic version of a bevel-up wooden spokeshave. It has the advantage of the blade being easily and securely set and the mouth aperture being adjustable. The japanning is almost all gone, but it's developed a nice, even patina from age and gentle use. The blade is in great shape and has no dings or chips in the bevel so it won't need to be ground, a huge time saver. If you are looking for one of these rare shaves to use, this is it.
$80 This Item Has Been Sold



Exceptional Stanley no. 6 Double Spkeshave.
This shave is in excellent condition with near perfect japanning and two excellent blades, both free of any pitting. The shave 's irons have the early circular logo. It's in excellent working order, and ideal working example, and one of the best I've ever come across.
$45 This Item Has Been Sold



Excellent Stanley SW era no. 55 Concave Spokeshave.
This is an ideal shave for working round legs, tool handles,etc. It is a SW era tool in excellent condition with more than 95% japanning. the blade is nearly perfect without a speck of pitting and a nice sharp bevel. It should make an exceptional worker.
$55 This Item Has Been Sold



Excellent Small 1in Hand Vise.
This is a dainty little hand viese, suited for the finest work. It has 1in wide jaws and is in excellent condition overall with a lovely, honest patina. It's a terribly useful tool to have onhand in the shop. I use mine all the time to grind and hone small blades, nickers, etc. This example is marked "P.S. Stubbs", an early English maker.
$26 This Item Has Been Sold



Small Brass Router Plane.
This is a patternmaker's brass router with a nice 1/4in wide blade. It has a nice even patina and should work well for small work. The tool is nicely shaped and fits well in the hand.
$35 This Item Has Been Sold



Pistol Grip sawset.
This is a simple, excellent pistol-grip saw set with no maker's mark. I'm pretty sure it's a Stearns, but I can't be 100% sure. It works perfectly and has at least 95% original finish throughout.
$15 This Item Has Been Sold



1 1/4in hand vise.
a small hand vise like this is ideal for holding small bits and blades while grinding and honing. I use mine all the time. This one has 1 1/4in jaws and is in good working order. It has some wear on the jaws and a slot to hold small round bits.
$24 This Item Has Been Sold



Stanley no. 63 SW Era Round-Bottom Spokeshave.
This is an excellent working example made during the Sweetheart era. The blade is in excellent condition without pitting and with a bold SW logo. The sole is clean and round to allow it to work tight curves.
$25 This Item Has Been Sold



English Diamond-Tipped Glass Cutter.
this mahogany-handled diamond glass cutter is in excellent condition. It is marked "Shaw, England".
$10 This Item Has Been Sold



Excelent 4oz Plumb Ball Peen Hammer.
This hammer has its original red handle, two clean faces, and is in excellent user condition,
$20 This Item Has Been Sold



Excellent Witherby 8in Drawknife.
This is one of the best Witherby drawknives I've come across. The blade is long and clean with zero pitting and a reasonably sharp bevel without any chips. The handles are perfect- not twisted, they have all original finish, and they are completely tight. It's a top quality worker drawknife.
$45 This Item Has Been Sold



Fancy Ball Peen Hammer.
This is a nicely decorated 4oz ball peen hammer with a nicely decorated head that is tight to the slim, tapered handle. It's a, well-made, pretty and completely functional hammer.
$30 This Item Has Been Sold



Interesting Wooden Scraper Plane.
This plane has a 3in wide scraper by woodsmith. The plane is in excellent condition overall. It's essentially a wooden version of stanley 80. The blade is fixed in place with a wedge and the bow adjusted by means of a thumbscrew. It's in near mint, unused condition.
$40 This Item Has Been Sold



Disston 10in Bevel Gauge.
This rosewood gauge has the Disston & Sons, Philda. logo stamped on the rosewood stock. The rosewood is excellent, the brss nicely patinated and uncleaned. The blade has pitting on both sides- a purely cosmetic problem.. the gauge will work perfectly.
$15 This Item Has Been Sold



Sandusky 1 1/4in Nosing Plane.
This is a good working example made by Sandusky carrying their model no. 114. The plane cuts a complete 180 degree round-over on 1 1/4in stock.
$22 This Item Has Been Sold



Fancy Rosewood and Brass Try Square .
This 8in try square has a fancy rosewood stock with a Cupid's bow decoration. It's very well made and dead square to the best of my ability to measure it. The rosewood is nearly perfect, the brass nicely patinated. It is marked partially: Mellusih, Otter Lane. The steel blade has some discoloration but no rust or pitting. It's a gorgeous tool and the perfect size for bench work.
$45 This Item Has Been Sold



Mint Mortise and Marking Gauge.
This gauge is made of some sort of rosewood. It is completely unmarked. It has three full, sharp points. It has a bit of age but doesn't appear terribly old. It's a perfect user mortise gauge.
$25 This Item Has Been Sold



Near Mint Starrett 6in inside CAlipers.
These calipers are in near-mint condition and have no wear or damage at all.
$15 This Item Has Been Sold



Starrett 4in Double Square.
This square is in very good condition and perfect working order. it has some light patina on the head but the blade is crisp and clean.
$30 This Item Has Been Sold



Mint, IOB Starrett 50A Trammel Points.
These trammel points are in mint condition with all original nickel plating. They are in the original box which has some wear and tear and some taped damage. The points have the original protective tops and the often missing pencil attachment. One of the points can be removed, the threaded section can then accept the pencil holder to facilitate scribing arcs and circles. They are a top-quality trammell set ready to use in situations where dividers are too small.
$45 This Item Has Been Sold



Mint, IOB Starrett no. 50B Trammel Points.
These trammel points are in mint condition with all original nickel plating. They are in the original box which has some wear and tear and some taped damage. The points have the original protective tops and the often missing pencil attachment. One of the points can be removed, the threaded section can then accept the pencil holder to facilitate scribing arcs and circles. They are a top-quality trammell set ready to use in situations where dividers are too small.
$45 This Item Has Been Sold



Marples 6in Wing Dividers.
These dividers were made by Marples & Sons in Sheffield. They are the classic British pattern, including the little flag at the end of the wing, and an ideal size for all sorts of bench work. They are in excellent condition with mild patina overall and perfect points.
$35 This Item Has Been Sold



Excellent 6in Try and Mitre Square.
This square is unmarked but looks like a Stanley to me. The rosewood is excellent. The brass is nicely patinated. The blade is straight and square to the best of my capability to measure it. It has most of its original bluing and crisp graduations. It's a good one to add to your working kit.
$25 This Item Has Been Sold



Excellent 6in Try Square.
This square is marked with the Stanley 18999 patent date. The rosewood is excellent. he blade is straight and square to the best of my capability to measure it. It has a speck of pitting around the maker's mark but the blade is otherwise clean. It's a good one to add to your working kit.
$22 This Item Has Been Sold



I Sorby 11in Try Square.
This is a typical British try square with a wide, thick blade and mahogany stock. It has a brass wear plate and a nice clean blade with a clear joker's head trademark. The blade is straight and square to the best of my ability to measure it. It's a nice user in a larger size.
$24 This Item Has Been Sold



Excellent Stanley no. 12 "type 11" era 8in Try Square.
This is a tough all-metal try square in excellent condition. It has a "type 11" V logo dating to 1910-18. It has almost perfect nickel plating. The blade is straight and square to the limit of my ability to test it. It's an excellent user square, especially useful when working outdoors where you don't want to ding up your nice rosewood tools.
$24 This Item Has Been Sold



Stanley no. 12 SW era 6in Try Square.
This is a tough all-metal try square in very good condition. It has aSweetheart era logo dating to the mid-late 1920s. It has decent nickel plating with some wear.. The blade is straight and square to the limit of my ability to test it. It's an excellent user square, especially useful when working outdoors where you don't want to ding up your nice rosewood tools.
$16 This Item Has Been Sold



Stanley no. 12 8in Try Square.
This is a tough all-metal try square in very good condition. I. It has decent nickel plating with some wear.. The blade is straight and square to the limit of my ability to test it. It's an excellent user square, especially useful when working outdoors where you don't want to ding up your nice rosewood tools.
$16 This Item Has Been Sold



Marples 7in Bevel Gauge.
This is a simple screw-lock rosewood and brass bevel gauge made by Marples in Sheffield. It has dense, good-looking rosewood and a decent blade- a fine worker.
$15 This Item Has Been Sold



stanley SW Era 10in Bevel Gauge.
This gauge has nice rosewood and a clean blade with some original bluing left. It's in perfect working order.
$20 This Item Has Been Sold



Massive 16in Rosewood Try Square.
This is a huge 16in bevel weighing in at about a pound. It will stay set and stay put. It's in very good, usable condition all around. It is completely unmarked. If you need a bevel for big layout work, this might be it.
$25 This Item Has Been Sold



stanley SW Era 8in Bevel Gauge.
This gauge has nice rosewood and a clean blade with some original bluing left. It's in perfect working order.
$20 This Item Has Been Sold



Marples 9in Bevel Gauge.
This is a simple screw-lock mahogany and brass bevel gauge made by Marples in Sheffield It has crisp Marples marks on the blade and stock. The stock is near perfect and has all original finish. The blade is crisp and clean with a clear mark.
$24 This Item Has Been Sold



Historic W&C Johnson, Philadelphia 10in Bevel Gauge.
This gauge has a clear maker's mark on the stock- W&C Johnson, Philadelphia. According to the EAIA DAT this partnership between Charles and William Johnson existed from 1833-40. This plane has historic significance beyond its sheer age- the Johnsons are likely the toolmakers that Henry Disston apprenticed under before starting his own business. i think this bevel is boxwood but it's hard to tell .The brass and wood are nicely patinated. The blade is fine. There is a partial collection ID on the bottom of the brass end. I wasn't confident I could remove it while leaving the nice brass patina in place so I decided to leave it alone. It's an interesting piece of hand tool history.
$30 This Item Has Been Sold



Excellent early Stanley 10in Bevel Gauge.
This is an early Traut's patent bevel gauge with the circular Sept 4, 1877 patent date. The rosewood is exceptionally clean and excellent crisp. The blade has minor discoloration and pitting. It will make an excellent user.
$22 This Item Has Been Sold



Excellent 6in Dividers.
This is a simple, well-made pair of 6in wing dividers, marked only with a "T" inside a circle. The legs are nicely tapered and the whole tools feels good in the hand. The points are sharp, the hinge tight, and the adjusting mechanism works perfectly. IT's a good general purpose size for all sorts of bench work.
$26 This Item Has Been Sold



Decorated British Wing Dividers.
This heavily decorated pair of dividers has u7in legs. One leg is ground to a point, the other to a knife edge for scribing. The wing is marked, I believe, "Burton". It' s avery good , usable pair of dividers, and quite a striking too to have in your working kit.
$35 This Item Has Been Sold



Exceptional Rosewood Mortise Gauge.
This is a clean, crisp unmarked British gauge in excellent working order. The deep, dark rosewood has no damage at all. The pins are very long and sharp. The head locks securely and the moving pin moves easily. It' s a gorgeous top quality gauge in perfect working order.
$40 This Item Has Been Sold



Good Use rMortise Gauge.
This is a British rosewood mortise gauge in good working order. The pins are sharp but on the short side- definitely still usable though. The head has a small chip where it meets the moving pin. It functions perfectly and will work well.
$25 This Item Has Been Sold



Tiny One foot, Four-Fold Boxwood Rule.
This rule is marked only "No. 1" I don't think it's a Stanley, Chapin-Stephens perhaps? It is in clean and sound condition with all three alignment pins and a good strong hinge. Cute and pocket-size.
$25 This Item Has Been Sold



Excellent Stanley no. 66 1/2 Three Foot Folding Rule.
this is an excellent example with all three alignment pins, extra-clean, crisp markings, and a strong hinge.
$35 This Item Has Been Sold



Excellent Stanley no. 53 Foot Folding Rule.
This is an excellent example with all two alignment pins, extra-clean and crisp markings, and a strong hinge. It is in perfect workig order.
$28 This Item Has Been Sold



Gorgeous 10in Forged Wing Dividers.
I've had these dividers decorating my well for quite some time.. It's time to pass them on. They are beautifully decorated with nice file work and an exctra-long wing. The points are sharp and ready to work. It's a gorgeous, functional tool that will make a nice addition to your shop or tool chest
$50 This Item Has Been Sold



Exceptional Stanley Sweetheart era no. 25 6in. bevel age.
This is an excellent example with perfect Rosewood,evenly patinated breasts, and nearly all original bluing on the six-inch blade. It has a clear, crisp sweetheart logo. It's a perfect user in a very handy size for benchwork. They don't come much nicer than this one.
$28 This Item Has Been Sold



Small 6 inch British wing dividers.
These dividers were made by TOGA. They are in excellent, nearly unused condition. One leg is sharpened to a point, the other ground to a knife edge for scribing. They are in excellent working order
$30 This Item Has Been Sold



Mint Stanley number 18 bevel gauge.
This "Eureka" pattern beveled gauge is an absolutely mint condition with no damage or wear at all. It has all original nickel plating. It works perfectly.
$40 This Item Has Been Sold



Tiny 2 inch Starrett Spring dividers.
This is a tiny little divider, well-suited to laying out small dovetails. It is in excellent condition with no rust or discoloration. Both legs are sharp. It adjusts easily. It's a hard smaller size defined in perfect working order.
$26 This Item Has Been Sold



Stanley no. 20 6in sweetheart era rosewood try aquare.
This is a very good working Square with a straight, square blade. It was made during the sweetheart era and has both the Sweetheart stamp on the blade and the sweetheart era decal on the Rosewood stock. It's fairly clean. The Rosewood is in very good shape with no chips, The brass is nicely patinated.
$20 This Item Has Been Sold



Exceptional Stanley no. 84 brass-bound boxwood folding rule.
These 2 foot folding rule is in excellent condition. It has clean, crisp markings on both faces. The brass is evenly and nicely patinated. The original alignment pin is present. The hinges are are strong and tight. It's an excellent working example
$45 This Item Has Been Sold



Stanley no. 2 rosewood try and mitre square.
To square is marked 7 1/2 in.. It has a sweetheart logo on the blade. The blade is straight and square. The rosewood has no damage.
$18 This Item Has Been Sold



Mint English rosewood mortise and marking gauge.
This gauge is in new, unused condition. it was sold by Woodworker's Supply in England. It has outstanding rosewood grain on the head and stuck. The points are all long and perfectly sharp. It adjusts easily and locks securely. It looks like a solid user mortising marking gauge.
$30 This Item Has Been Sold



Very scarce Disston 10 in. No.3 bevel gauge.
This is a scarcity distant devil, A virtual copy of the Stanley no.18. It is an excellent, Almost near mint condition. It has full nickel plating and only a few specks of discoloration on the blade. It works perfectly. It's an excellent example to use or add to a Disston collection.
$40 This Item Has Been Sold



Excellent pair of trammel points.
These trammels were made by General in New York. They're designed to fit on a 7/8 inch square stock. This is a useful tool to have for jobs were dividers are too small.
$25 This Item Has Been Sold



Veritas 6in Precision Square.
This tool is in excellent condition with some faint wear. It lists for $25-
$20 This Item Has Been Sold



Veritas Height Gauge.
This is a "vintage" Veritas tool I can't find in any of their catalog or online. It has some patina on the brass so it has to have some age to it. It is in excellent condition with no damage. It cam measure height up to 4in above the surface. The base is solid brass so it stays put. A typical top quality Veritas tool.
$30 This Item Has Been Sold



Early British 10in Wing Dividers.
These graphic wing dividers han an even, honest patina allover. They work perfectly, adjusting easily and locking securely. It's a good pair for larger layout work. They are nicely decorated with the usual filework
$40 This Item Has Been Sold



Excellent 8in Wing Dividers.
This set of dividers is completely unmarked and in excellent working order
$30 This Item Has Been Sold



exceptional 8in Wing Dividers.
This pair of wing dividers is either highly polished or nickel-plated. they are in perfect working order. One leg is ground to a point, the other to a knife edge for scribing. It's a good-looking perfect user pair.
$35 This Item Has Been Sold



5in British Wing Dividers.
This small divider is on the dirty side but works perfectly and could probably be cleaned up a bit if you choose. It's a nice size for laying out dovetails.
$25 This Item Has Been Sold



Stanley Sweetheart Era 8in no. 20 Rosewood Try Square.
This is a good example with a clean, straight, square blade. It has most of its original bluing. The blade is square, tested to the best of my ability to measure it. The rosewood has a few light scratches, but the wild grain and color variations make up for that I think. It's a good, usable square to add to your kit.
$20 This Item Has Been Sold



Unmarked 6in TRry Square.
This is a gorgeous example with a clean, straight, square blade, and exceptional rosewood stock. The blade retains almost 100% of its original bluing. It is square, tested to the best of my ability to measure it. It's a great example to add to your kit.
$20 This Item Has Been Sold



Stanley no. 98 SW Era Dual-Beam Marking Gauge.
This is a Sweetheart era tool with two beams. It has a circular cutter on one end of each, a marking pin on the other. It has at least 95% original nickel and is bright and clean. It's a very nice example in excellent working order.
$40 This Item Has Been Sold



Vintage Striking Kinfe.
This is a rare vintage British striking knife made by, or for, Buck and Ryan in London. It has a knife edge on one side, an awl point on the other. It is in very good, usable condition. It's a rare tool to find, and also a very useful one.
$35 This Item Has Been Sold



Excellent Stanley no. 90 Marking Gauge.
This is a simple single-beam gauge with a marking pin in near-mint condition.
$15 This Item Has Been Sold



Excellent Stanley SS Era no. 77 Mortise and Marking Gauge.
This is a beautiful Sweetheart era gauge with minimal wear and excellent color. It has a bold Stanley mark. All three pins are absolutely full-length and they adjust easily. It's a perfect worker mortise gauge.
$40 This Item Has Been Sold



Stephens & Co. no. 48 Two-Foot Brass-Bound Folding Rule.
This si a good, usable rule with clear markings. It has a tiny chip in the wood and it's missing two pins, but the center pin is there and it lays flat when unfolded. It looks good and should work well.
$20 This Item Has Been Sold



Small 4in Spring Dividers.
These small dividers, made by the Sandow Tool Co. are in excellent condition. They are the perfect size for dovetail layout.
$22 This Item Has Been Sold



Excellent Rabone Two Foot Boxwood Folding Rule.
this was made by RAbone in Birmingham. It's a model 1275 with an arch joint and excellent boxwood. The markings are crisp and perfect. It has 2/3pins remaining and lays flat when folded and completely open. It's a great rule to have in your kit.
$35 This Item Has Been Sold



Lufkin no. 781 Two Foot Brass-Bound Boxwood Folding Rule.
This is an excellent example with crisp, clear markings, all three alignment pins, and perfect brass.
$40 This Item Has Been Sold



Brown and Sharpe no. 540 Machinists Square.
This is a good example with a dead square, straight blade. It has some scattered discoloration and pitting.
$15 This Item Has Been Sold



Stanley 6in "Eureka" bevel Gauge.
This gauge is in fair condition- it's missing a lot of nickel and the blade has been cleaned, but it works perfectly. It's one of Stanley's best bevel designs and works very well. The extra mass of the metal stock keeps it in place while in use.
$20 This Item Has Been Sold



Mint Starrett Center Head.
This is a model C11-1224 center head for a 12in or larger Starrett Combination Square. $34 new from Starrett. It is in new, unused condition in its original box with all of the wrappings.
$26 This Item Has Been Sold



Small 12in Wedge-Lock Slitting Panel Gauge.
This is a great way to mark panels to width. It's a simple but well-made slitting gauge with a very sharp blade. The head is easy to set with the wedge and stays put. It works very well.
$25 This Item Has Been Sold



Starrett Tramell Points.
These Starrett trammels are in excellent condition with almost perfect nickel plating. The 8in points are marked Starrett. They ride a 24in beam and do the same layout work as dividers where the distances get too long.
$35 This Item Has Been Sold



Exceptional 8in I. sorby, sheffield Wing Dividers.
These are the first wing dividers of this sort I've come across made by Sorby. They are beautifully made to the typical British standards. They remain in excellent working order with nice even, sharp legs. It's a great general-purpose size to put to work.
$30 This Item Has Been Sold



British Wing Dividers.
These are big, stout wing dividers made in the typical British style. The are marked "Brindley" I believe. They are coated with a layer of patina and have some pitting, but they work fine, adjusting easily and locking securely. One leg needs to have it's point reground, or be reground to a knife-edge for scribing.
$25 This Item Has Been Sold



Very Early, hand-forged 8in Wing Dividers.
These dividers appear to be hand-forged. they are unmarked and in good, usable condition. the hinge is tight and adjusts easily. the locking thumbscrew keeps them set securely. It's a good-loking, useful medium sized pair of dividers.
$30 This Item Has Been Sold



Beamis & Call 7in Precision Wing Dividers.
this is a very good working pair of dividers. it has an even, honest patina from age and light use. They remain in excellent working order. The hinge is tight, the adjusting screw locks them tight and the micro-adjuster works smoothly. Both legs are sharp and even. it's a great general-purpose set of dividers.
$28 This Item Has Been Sold



20in Beech Panel Gauge.
This is a very good useable beech panel gauge. IT has graduations along the beam but no maker's mark. I'm almost certain it's a Stanley- their were never marked. It's a handy tool to have when marking wide boards to width.
$35 This Item Has Been Sold



Excellent IP Hypde, Southbridge, MA Adjustable Layout Knife.
This is a gorgeous adjustable rosewood and brass layout knife with a long, sharp knife blade. The brass is nicely patinated and the rosewood has excellent grain. The blade can be adjusted to protect the blade in the knife's body, ot to project out to its full 8in length. It's a beautiful example of a useful small marking knife.
$30 This Item Has Been Sold



Scarce Slitting Gauge.
This is well-made, excellent user slitting gauge perfect for scoring across the grain. The beam is graduated and clearly professionall-made, but it has no maker's mark. The blade is sharp and has a good bit of life left.
$26 This Item Has Been Sold



Small 4in Trauts Patent Try Square.
This is an all-metal version of the no. 1 try square with Traut's patent stamped on the pewter infill. The blade has some discoloration but it's straight and square.
$16 This Item Has Been Sold



Excellent 6in Framing Square by Darling, Brown and Sharpe.
This square is in excellent condition with clean, clear graduations. It was made by DB&s, the predecessor to Brown and Sharpe in Providence, RI in the mid-late 19th century. It's a scarce tool in great shape.
$22 This Item Has Been Sold



Early 4in Machinists Square.
This square was made in Orange, MA by Turner &... I can't make out the first name. it Looks like "Faneuf" but I don't see any matches for that in the EAIA Dat. It is in very good condition with a nice straight, square blade. Good-looking and completely usable.
$20 This Item Has Been Sold



Mint STanley no. 136 1/2 6in Caliper Rule.
This rule is in mint condition and is capable of taking both outside and inside measurements with the caliper.
$20 This Item Has Been Sold



Stanley 36 1/2R One Foot Boxwood Caliper Rule.
tis rule is in very good condition with crisp, clean graduations, a nice tight hinge, and the original alignment pin present.
$25 This Item Has Been Sold



Exceptional British 6in Rosewood Bevel Gauge.
This gauge has incredible rosewood for the stock and retains almost all of its original handle decal. It was made by Robinson Hall of Sheffield. The blade is straight and clean with much of its original bluing.
$25 This Item Has Been Sold



Unmarked 9in Roswood Bvel Gauge.
This is a good-lookng, functional 9in bevel with especially nice rosewood for the stock and evenly patinated brass ends. The blade is straight and clean. It's a good general purpose size for all work.
$20 This Item Has Been Sold



Crisp Stanley no. 35 8in Rosewood Bevel.
This is an excellent example with perfect rosewood, nicely aged brass, and a clean, straight blade.
$22 This Item Has Been Sold



Large 14in Bevel by Disston and Morss.
This bevel is in good, usable condition. It has a nicely shaped locking thumbscrew and some wear to the stock. The maker's mark is light, but completely legible. It's a good user bevel in a nice large size.
$25 This Item Has Been Sold



Excellent Stanley No. 18 Eureka Bevel Gauge.
This is a clean crisp example with at least 98% nickel. The blade is straight and clean. It's a great working example of Stanley's best bevel.
$30 This Item Has Been Sold



Extra-Steep Quirk Ovolo and Bead.
This is an early British molding plane, possibly dating to the 18th century. I cannot make out a maker's mark at the toe, though it was clearly made by a highly skilled professional planemaker. t has the appearance of a plane from the 1700s, or perhaps the very early 1800s. It's clearly British and has had at least three owners, two of whom were of the surname Hodgins. The plane cuts an elaborate quirk ovolo and bead measuring 1 1/4in wide by 1in deep. The blade is in remarkably good condition considering the age. It is fairly clean with a few minor spots of pitting well away from the bevel. The entire bead is boxed. The quirk boxing has a few cracks but it is straight and stable. It's a graphic early molder which would make a nice addition to a collection or working kit.
$30 This Item Has Been Sold



Larger Quirk Ovolo and Bead by Heathcott & Linley, Sheffield.
This plane was made ca. 1839-45 by the partnership of Charles Heathcot and Linley according to Goodman. The plane is in very good condition overall. It cuts a wide, deep profile measuring 1 1/2in wide by 1in deep. the plane is clean overall with no damage and signs of light use. The blade has specks of pitting scattered about, no surprise considering its considerable surface area, but nothing that will cause much of a fuss when sharpening. The mouth is still quite tight. The quire and the transition to the bead are both boxed. The blade is bedded at cabinet pitch. It should make a fine worker cutting this appealing profile suited for cornice moldings.
$45 This Item Has Been Sold



Excellent Varvill Reverse Ogee Molding Plane.
This plane was intended for use with sash windows but has a number of other uses as an edge treatment for furniture or case work. The plane cuts a 11/16in "Lamb's Tongue" profile as stamped on the heel. Varvill used the belt and suspenders method of marking their planes- if you couldn't tell the profile name by looking at the heel of the plane, they also stamped the name for you. This is an odd size, but a very shapely profile, ideal for a shelf or table edge. As with all Varvill planes, this one is very well made. It has a cabinet pitch blade in excellent condition with no pitting at all. The bevel is in great shape and is reasonably sharp. The mouth is very tight. The body has the expected marks from light and careful use. It's a scarce profile and and should be an outstanding worker.
$50 This Item Has Been Sold



Big Moseley & Son Quirk Ogee and Bevel Molding Plane.
This is an especially steep quirk bevel and ogee molder made by Moseley in London ca. 1838-61 based on the mark and Goodman's research. The plane is in very good condition overall and would be absolutely usable. The body is clean and signs if light, careful use. The boxed quirk is dead straight. The boxing has very even, regular figure along its length which is really pretty. The profile is 1 3/4in wide by 1in deep. The heel of the plane is marked 8/8, corresponding to the depth of the profile. The blade is bedded at cabinet pitch. It is clean with no pitting a all and the bevel is actually very sharp. It's an nice example of this useful molding profile commonly used for casings, frames, and cornice moldings.
$45 This Item Has Been Sold



Mathieson 1/2in Side Bead Molding Plane.
This is a very good, usable molding plane what has seen some work in tis time. I really enjoy finding planes like this- with residue from tallow on the sides which clearly show where the former owners' hands gripped the plane while in use. The blade is sharp and clean with zero pitting the boxing is slightly worn but straight and true. It has a cabinet pitch blade in a good, tight mouth. It will take a minimum of effort to have it and running again.
$26 This Item Has Been Sold



Exceptional 3/4in Side bead by Mathieson.
This bead has seen little use at all. The body and boxing are crisp, clean, and perfect. The York pitch blade has the original factory bevel and no pitting at all on the back. It's a nice larger size for case or base molding, or larger scale moldings.It's an excellent working example, about as nice as they come.
$30 This Item Has Been Sold



Excellent E Smith Quirk Ovolo and Bead Molding Plane.
This plane cuts a small quirk ovolo and bead measuring 5/8in wide by 1/2in deep. It is in excellent condition overall- the body is nice and clean and has virtually no dings or scratches. The profile is boxed at both high-wear areas: Once at the quirk and another strip at the inside edge of the bead The blade is clean and fairly sharp, It matches the sole very well. It was made by Ezekiel SMith who made planes in MA and RI from the 1820s to the 1870s. The plane is made of very dense beech giving it an unexpected heft for its size. It's a nice profile for a collection or a working kit
$50 This Item Has Been Sold



5/8in Square Ovolo by G. Berry, Old Street London.
This plane has a 55 degree cabinet pitch blade in excellent condition. The body is nice and clean without damage. The profile is 5/8in wide and tall, a nice shape for an edge of a blanket chest, toolchest, etc. It's a top quality plane in excellent user condition
$45 This Item Has Been Sold



Nice Flat Quirk Ogee Bevel Molding Plane.
This is a nice variation on a common profile with a flat ovolo. It measures 1in wide by 1/2in deep. It is in excellent condition with an exceptional blade. The maker's mark is overstruck, all I can make out is Cincinnati, OH. It si in excellent suer condition.
$40 This Item Has Been Sold



Nice Steep Quirk Ogee Bevel Molding Plane.
This is a nice variation on a common profile with a very steep ovolo. It measures 1in wide by 1/2in deep. It is in excellent condition with an exceptional blade. The maker's mark ireads H.M. Park, Richmond, IA a mark that rates (***) for rarity in AWP-IV. It is in excellent condition save a small chip out of the body on the escapement side- purely cosmetic, this flaw will not affect use.
$35 This Item Has Been Sold



Large Quirk Ogee and BEvel by Griffiths.
This is a much larger Quirk Ogee and bevel than the others I've listed, and one of the largest I've seen from Griffiths. The profile is 1 1/2in wide by 5/4in deep. The boxing is straight. there is a small additional fence added on to the sole to make it easier to use. The blade is in amazing condition with absolutely no pitting whatever. It's a massive plane is great shape.
$50 This Item Has Been Sold



Exceptional 1/2in Cove and Astragal by M. Copeland.
Copeland made some of the highest quality planes in 19th century New England, and this one is no exception. The profile is a beautiful 1/2in deep, 1/2in wide cove and astragal. The plane's body is crisp and clean with little wear. The blade is near perfect- honed and polished and very sharp. There is no pitting. It's a gorgeous plane in top quality user condition.
$55 This Item Has Been Sold



Excellent 3/8in Square Ovolo Modling Plane by Anton, Aberdeen,.
This is an excellent working plane with a useful small profile. The plane has a very long fence to help keep it at the proper spring angle. The York pitch blade has no pitting and has been lapped flat and clean. The mouth remains tight and there is minor wear. It's a great user molding plane for cutting this simple but useful profile.
$40 This Item Has Been Sold



Excellent pair of Applewood 1/2in Match Planes.
This pair of Tongue and Groove planes was made by JZ MCMaster in Auburn, NY. They are made of apple and have minor wear. Both will be excellent users- the blades are clean and long. The grooving plane has a replacement beech wedge which fits well but is not original. It should be an excellent working pair for cutting tongue and groove joints in 1/2in thick stock.
$55 This Item Has Been Sold



Big 1 3/4in Skew Rabbet by Mathieson. .
This is a crisp, clean skew rabbet that hasn't seen much use at all. There is some minor wear at the heel, probably from storage in a tool box. Otherwise the plane has almost no wear at all anywhere. The corners are crisp and sharp. The iron is full length. The mouth is ultra-tight. There is some light pitting on the back right at the edge. It's not too deep and could be lapped or ground away when forming a new bevel- certainly not a show stopper. It should be a great rabbet to put to use.
$40 This Item Has Been Sold



Extra-Crisp and Clean 5/8in Flat Ogee Molding Plane by Mathieson. .
This is a crisp, clean sash molder that hasn't seen much use at all. It cuts a nice flay 5/8in wide ovolo, which is a perfect edge treatment for a case lid, shelf edge, tabletop, etc. It's an extremely easy plane to use with its wide fence and depth stop to help keep it at the correct spring angle. There is no wear. The corners are crisp and sharp. The York Pitch iron is full length. The mouth is ultra-tight. There is no pitting at all on the blade and it has been lapped clean and flat. It should be a great rabbet to put to use. It would be hard to find a better user molding plane, vintage or new.
$60 This Item Has Been Sold



Exceptional, Tiny 1/2in Skew Rabbet by Atkin & Son.
This is an exceptional small rabbet- the body is dead straight with zero warp and the sole is dead flat. Smaller rabbets like this are almost always warped. This one is in great condition. The blade is flat on the back and has no pitting. It's quite sharp. The mouth is still tight. The blade is skewed slightly, about 15 degrees. The body has evidence of an attached fence or depth stop at some point, but it's otherwise clean. It's a top quality molding plane made by one of the best makers. It's a very unusual small size in great user shape.
$50 This Item Has Been Sold



Excellent 5/8in in Skew Rabbet by Greenslade.
This is an perfect user skew rabbet- the body is dead straight with zero warp and the sole is dead flat. Smaller rabbets like this are almost always warped. This one is in great condition. The blade is flat on the back and has no pitting. It's quite sharp. The mouth is still tight. The blade is skewed slightly, about 15 degrees. It is bedded at a higher than usual 55 degrees, or cabinet pitch. The body has evidence of an attached fence or depth stop at some point, but it's otherwise clean. It's a top quality molding plane made by one of the best makers. It's also a hard to find small size in great user shape.
$45 This Item Has Been Sold



Owasco 1 1/4in Skew Rabbet Molding PLane.
This plane has been used, but remains in good shape. The sole has some wear, but it's not warped or twisted, and it remains flat. The corners are a bit work and the plane has some general signs of use. The blade is excellent and nearly full length with no pitting. It's a plane that will tune up easily enough- a couple of passes over the sole with a jointer will sharpen up the corners and clean it up a bit. The blade won't take much to have up and running. It will require a bit of labor, but it should work well.
$22 This Item Has Been Sold



Excellent Chapin 7/8in Handled Tonge and Groove Pair.
This is a crisp, clean working pair in excellent condition. I don't think they were ever used, at least not much. They were made by the H. Chapin company at the Union, one of the better American makers in the late 19th century. These both have long, thin horns in complete, undamaged condition. The blades are both excellent and full-length. There is some discoloration on the skate of the grooving plane, about the only flaw I can see. It should be a great working pair for cutting T&G joints on 7/8in stock, and 3/4in stock as well if you are careful. This is a perfect size for working a tool chest, cabinet back, etc.
$65 This Item Has Been Sold



Tiny 3/8in Quirk Ovolo and Bead Moldering Plane.
This plane cuts a tiny version of this common molding profile. It is likely British, but the maker's name was obliterated by a former owner, overstamped with an owner's mark several times to make it completely unreadable. The sole is dead straight without any twist. The boxing is straight and complete. The blade is in very good condition without any pitting. It's a rare smaller profile in great user condition.
$45 This Item Has Been Sold



Scarce American 1/2in Flat Ovolo.
This is a common British sash profile but mare by Cummings, an American maker. The plane cuts a 1/2in wide by 3/8in deep flat ovolo, a nice profile to use to break the edge of any shelf, table top, etc. The plane is in very good condition overall with minimal wear. The beech is simply outstanding with three-dimensional ray fleck on teh non-escapement side. The blade is in excellent condition without any pitting. The working area of the back has been lapped clean and flat. It should be a fine worker.
$40 This Item Has Been Sold



Outstanding Massive 1in Cove Molding PLane.
This plane is unmarked completely. It's expertly made and of the highest quality. I'm almost certain it's British. It has a cabinet pitch blade, a rare thing to find on an American plane. The body is crisp and barely has a ding. There is a light stain on the escapement side toward the toe. The blade is absolutely perfect. The heel has no hammer marks at all. It's a rare profile and it would be a top user for anyone looking to cut a massive cove.
$45 This Item Has Been Sold



Early Tiny Ovolo and Cove Molding plane by Lourie.
Lourie was a late 18th century, early 19th century molding plane maker who worked in Edinburgh ca. 1774-1813. The plane cuts a profile 1/4in wid eby 3/8in deep. It's a pretty profile suited to smaller work- boxes, small sash windows, etc. The plane is clean and shows minor wear. The blade is in good shape with minor pitting scattered about. It's a good user plane with an interest profile.
$40 This Item Has Been Sold



Decent Sandusky 3/4in Skew RAbbet.
This rabbet has been used and has the dings and scratches to prove it. The blade is in good shape. The mouth is opened up. It needs a quick pass over a jointer to square up the sole. It's usable with a small bit of work.
$15 This Item Has Been Sold



Massive and Excellent Greenfield Quirk Ogee and Bevel Molding Plane.
This molder cuts the ubiquitous quick ogee and bevel profile- a useful profile for casings, frames, cornice moldings, etc. This one cuts a 1 1/2in wide by 5/8in deep profile. The plane is in excellent condition and shows no wear. The blade is nearly perfect and unused. The boxing is straight and complete. The plane's body is crisp and clean with sharp corners and no damage. It should be a fine user and an excellent addition to any working kit of molders.
$55 This Item Has Been Sold



Very Scarce Fully Boxed Skewed 3/8in Ovovlo by Dawes.
The Dawes family made planes in London ca. 1861-1920 according to Goodman. This plane is unusual in that the sole profile is fully boxed with a single thick piece of boxwood. The blade is skewed about 20 degrees- something you almost never see on a molding profile like this. The blad eis near perfect- clean, flat, and free of pitting. It's still pretty sharp. The body is clean, and shows a bit of use, but has no damage and is still quite clean. It should be a great user and an interesting addition to any working kit of molding planes.
$45 This Item Has Been Sold



Very Good User 5/8in Flat Ovolo by Mathieson.
This MAthieson ovolo has a york pitch blade and a tight mouth. It has moderate wear but remains in very good user condition. The blade is clean and sharp without any pitting. It has a nice deep fence to help keep it at the proper spring angle. It should be a great user, ideal for putting a small profile on shelves, table tops, etc.
$40 This Item Has Been Sold



Matched Pair of Mathieson 7/8in Tongue and Groove Planes.
this is a very good working pair of tongue and groove planes that cut the joint centered on 7/8in stock. This is a good size for a toolchest, and other medium scale work. The planes have excellent blades, and very good bodies without damage. The skates on the grooving plane are straight and in line. It's a fantastic working pair.
$50 This Item Has Been Sold



Excellent 1/2in Square Ovolo by B. Bown.
This is an early plane made by Benjamin Bown.Bown worked from 1781-1816 in Winchester according to Goodman. This plane likely dates to the earlier side of that period based on its features. The profile is beautiful- a simple square 12in ogee. The blade is sharp and has no pitting at all. The back of the blade is clean and flat. It should be a good user, cutting this useful smaller profile with ease.
$45 This Item Has Been Sold



Early, Well-User 3/4in Dado Plane.
This dado has seen quite a bit of work judging by the hammer marks on its heel. It remains in good condition despite a replaced wedge to hold the nicker. Both the main blade and the nicker are long and clean with no pitting. The sole has no warp or twist which is a common flaw with dados. It's a highly desirable size that should work quite well.
$40 This Item Has Been Sold



Excellent Greenfield 3/4in Dado Plane.
This is a fantastic working example with a crisp, clean body, nearly perfect blades, and a thumb-screw actuated depth stop. Everything works perfect. The sole has no warp or twist. It's one of the few 3/4in dedos I've found over the past few years, and by far the cleanest. This will make an exceptional user.
$60 This Item Has Been Sold



Early Stewart 3/4in Dado Plane.
The Stewarts began making planes in Edinburgh ca. 1774 and worked to 1848 according to Goodman. This plane looks to date to the earlier portion of that period. The plane has been used a lot and the main blade is on the short side, but it's definitely usable. The body has dings and scratches but it's straight and free of twist. The nicker is long. It should be a perfectly good worker to cut 3/4in wide dados.
$40 This Item Has Been Sold



Exceptional Varvill 5/8in Quirk Ovolo Molding Plane.
This plane is in outstanding condition with clean, crisp corners, a perfect blade, and dead straight, uncompromised boxing. The plane was made by one of the best British makers- Varvill and Sons in York. The plane has a cabinet pitch blade and a very tight mouth. The profile is only 3.4in wid eby 1/2in deep. The heel was marked in pencil by the original merchant with the profile name, size, and price. It's an outstanding worker plane made by one of the best.
$55 This Item Has Been Sold



Outstanding Mallock 38in DAdo Plane.
This is a top quality dado in excellent user condition. The blades are long and clean without pitting. As you see in the photos th ebody is nic eand clean with sharp corners and no damage. The sole is dead straight without warp. It's a hard to find smaller size in excellent working condition.
$50 This Item Has Been Sold



Outstanding Moving Fillister by Gardner, Green Street, Boston.
This plane was made by Leavitt Gardner in Boston ca. 1825-45. The plane is in amazing condition considering its age. It has apparently seen almost no use at all. The boxed working corner is sharp and clean. There is no wear around the mouth. The blade has a perfectly clean back. the dovetailed nicker is original length and sharp. There are two screws tha thold the fence in place, both are tight and not stripped. It's about as nice an American fillister as I've ever found. It will make an outstanding user, cutting rabbets both with and across the grain.
$95 This Item Has Been Sold



Greenfield 3/8in Casing Molding Plane.
This plane puts a simple thumbnail profile on the long grain ofa board, perfect for casings, shelf edges, etc. It was made by the Greenfield Tool Co. in Greenfield, MA. The plane is in very goodc ondition overall. It has a nice sharp blade. The only flay is a replacement wedge which looks almost like an original.
$26 This Item Has Been Sold



Early L. Kennedy, Hartford Adjustable Rabbet Plane.
This plane was made by Leonard Kennedy in Hartford, CT. Kennedy worked in the first half of the 19th century. This is an adjustable skew rabbet with a brass depth stop. It's almost a moving fillister but lacks the nicker. The plane is in very good condition overall with the expected patin and dings. The depth stop and fence work well. The blade is in exceptional condition- it is full length and perfectly flat and clean on the back, apparently recently lapped. It's an outstanding example by a well-respected American maker in excellent user condition.
$45 This Item Has Been Sold



Outstanding Small Quirk Ogee Molding plane by Donaldson, Cincinnati OH.
This is a very steep, small quirk ogee with a profile measuring 3/4in wide by 7/16in deep. It's a gorgeous curvy profile. The plane is in excellent working order. It was made by the James Donaldson in the early-mid 19th century. The plane's body is crisp and clean with very few dings. The corners are still sharp and crisp, The boxed quirk is perfect. The blade is near perfect as well with a clean, flat back. It should be an outstanding user.
$50 This Item Has Been Sold



Exceptional Mathieson 1/2in Dado Plane.
this plane is in clean, crisp condition. The blade is excellent, the nicker is long. It has the wedged nicker with the finial pointed to the side which makes it much easier to set/remove. The sole is dead straight. It will be an outstanding worker in a very desirable size.
$50 This Item Has Been Sold



Unusual large Mathieson 1in Flat Ovolo Molding PLane.
This is a typical sash ogee profile but in an extra-large size. It cuts an ovolo approx, 1in wide by 1/2in deep. It would be a nice profile for a blanket chest top, tool chest, lid, etc. It is in very good condition with some wear to the body. The blade does have some pitting but it should work out with not too much effort, worth it for this unusual plane.
$30 This Item Has Been Sold



Gorgeous Early I SYM 1/2in Ogee Molding Plane.
John Sym made planes in London from 1753 into the very early 19th century. This is a beautiful example of his work. The plane cuts a very attractive 1/2in square ogee. The blade is in excellent condition with a perfectly clean back without a speck of pitting. The plane body has some dings and minor wear, but it is in excellent condition overall. It should be a perfect user plane and an interesting piece of history.
$60 This Item Has Been Sold



Excellent Triple-Boxed Quirk ogee and Bead Molding Plane.
This plane has no maker's mark I can see, but it is very well made, likely American. The profile has three boxes strips- the quirk and both sides of the bead. It's a striking profile 3/4in wide by 3/8in deep. The blade has some discoloration but no pitting. The mouth is super tight. The body has no damage and barely a ding. The corners are sharp and crisp. The only flaw is a tiny chip out of the very rear of the boxed quirk. It should be an outstanding worker.
$45 This Item Has Been Sold



Unusual Handled Standing Fillister by Kellogg, Amherst MA.
Kellogg made some unusual planes- this is a good example. It's a standing fillister- it's only job is to cut 1/2in wide rabbets. I don't recall ever seeing a handled version of this rare profile. The blade is straight across, not skewed. The mouth is ultra-tight. The horn on the tote is perfect, finely carved and very thin. The blade does have some light pitting. The body is crisp and clean. It's a nice example to add to your collection or to use to cut 1/2in rabbets.
$45 This Item Has Been Sold



Exceptional Matched Set of Five Side Beads by Gleave, Manchester .
These five planes were made by Joseph Gleave & Son in Manchester between 1869-1913. The five planes have always been together, sharing the same maker's and owner's mark as well as general patina. It's a very well-made set of planes with excellent attention to detail- the breast, for example, isn't cut straight across, but rounded with a gentle curve. The step has a nice curve as well with a deep gouge cut at the transition. The breast is also skewed, while the bed is straight across, a feature of well-made British planes that I can't find a reason for. In short, they are top quality planes. All five remain in outstanding condition. The blades are long and clean with zero pitting. The boxed quirk on all is deep and dead straight. Some have signs of light use, but none have any damage at all. The blades are all bedded at cabinet pitch- 55 degrees. The set includes sizes 3,5,6,7,8 eighths. It's an outstanding set of side beads, a great choice to put to work.
$145 This Item Has Been Sold



Cute, Small 1/2in Skewed Ogee Molding Plane.
This plane was made by James Vincent in Stratford-On-Avon ca. 1792-1828. The plane cuts a cute little 1/2in wide by 3/8in deep ogee. An interesting thing is that this plane's iron is skewed, something I've only seen a handful of times on a complex molder. Aside from the skew the blade is also bedded at cabinet pitch, 55 degrees. The plane is in good, usable condition. It has some signs of significant use but the blade is well-kept and free of any pitting. It's an unusal small molder in good working order
$45 This Item Has Been Sold



Unusual Moseley Flat Ovolo and Bead Molding Plane.
This is an interesting profile measuring 1in wide by 1/2in deep. The plane is in excellent working order with no damage and only minimal signs of use. The blade is bedded at cabinet pitch, 55 degrees. The back is perfectly clean and lapped flat. IT should be an outstanding worker with a very interesting profile
$55 This Item Has Been Sold



Well-Used 1/2in Ogee Molding Plane by Storrie, Edinburgh .
This plane was mad eby Alex Storrie in Edinburgh ca 1860-64. The plane cuts a 1/2in wid eby 3/8in deep ogee. It's a cute little profile and the plane has ben used a lot. It's in good, usable condition still. It has dings and scratches galore and the evidence of a fence attached at some point. Still, the blade is clean and sharp and the plane remains usable.
$30 This Item Has Been Sold



Excellent 5/8in Flat Ovolo Molding Plane.
This is a well-made plane, surely British. but it has no maker's mark I can read. It cuts a common 5/8in wide flat ovolo. It's one of my favorite molders to use wince the profile is so versatile on almost any edge. The plane is crisp and clean with an exceptionally clean and sharp blade without any pitting at all. It should be an outstanding worker.
$40 This Item Has Been Sold



Exceptional Double-Iron Malloch, Perth Ogee and Ovolo Molding Plane.
I think double-iron planes like this are the height of the planemaker's art. I can't imagine the layout work that goes into marking up a plane blank to make this sort of plane. This is a beautifully made sash plane that cuts a 5/8in wide and 1/2in deep oge and ovolo. It's a beautiful profile that would look good in any sort of small scale work. The plane has two irons, one to cut each molding profile. This makes it much easier to sharpen the blade and takes care of a lot of the reshaping work that would normally need to be done if this were a single iron plane since the ovolo would wear much faster than the rest of the plane. The plane is in excellent working order with a nice clean body, and excellent blades without pitting. The fence is extra-deep which will help keep this plane at its proper spring angle. It's a most unusual profile in a top-end plane.
$75 This Item Has Been Sold



Early Lambs Tongue Molder by Wheeler, Reading.
This Plane was made by Thomas wheeler in Reading ca. 1796-1826. It cuts a flat 5/8in wide 1/2in deep lamb's tongue or reverse ogee molding. It' san attractive profile for a shelf edge, table top, etc. The plane is in fair condition overall but I believe it remains a good candidate to put to work. It has major gouges out of the escapements side and some in the sole. The mouth is clean and the blade is clean and lapped. Not pretty, but it should work well.
$25 This Item Has Been Sold



Unusual larger 3/4in Flat Ovolo by Mathieson.
This is a 3/4in wide, 3/8in deep flat ogee made by Mathieson in Glasgow. It is in excellent condition overall. The body is crisp and clean, the mouth tight, the blade free of any pitting at all. It's an easy plane to use, the massive fence making it simple to keep the plane at the proper spring angle. It's a bit wider than most of these sash profiles- it might be ideal for a larger shelf, chest top, etc. It's a nice usable molder.
$40 This Item Has Been Sold



Early 3/8in Astragal Molding Plane.
This plane has an early appearance and looks British to me. There is a very faint maker's mark ont he toe above the owners; marks but I can't make it out. It's in good condition with some wear but a clean blade without pitting.
$20 This Item Has Been Sold



Outstanding Moseley Quirk Ogee and Bevel, Tuned and Ready to Work.
This is an extra-curvy quirk ogee and bevel molding plane. The plane is so crisp and the profile so downright sexy I couldn't help myself and had to hone the iron and give it a test run. It cuts beautifully, leaving a nice crisp, smooth profile, an ideal cornice molding for smaller work. The profile is 1in wid eby just under 1/2in deep. The boxed quirk is deep and straight. The plane is in excellent condition overall with no damage and only light wear. The cabinet pitch blade is sharp, honed and ready to work. You can see a photo of the molding I cut with it on the photos page.
$95 This Item Has Been Sold



Early Triple Bead plane by Lund, London.
This plane cuts three 1/4in beads in a cluster. It was made by John Lund in London ca. 1805-31. The four boxed strips are all in good order,- straight and even. The plane has seen light use but remains in very good condition overall. The blade has scattered pitting but nothing serious and it's still completely usable. It's an unusual profile and should make a nice addition to any collection or working it of planes.
$45 This Item Has Been Sold



Excellent Reverse Ogee Molding Plane.
This plane cuts a 1in wide by 7/8in deep reverse ogee. It's a very well made plane, constructed of ultra-dense beech giving it an incredible heft for its size.There is no maker's mark at the toe I can discern, just an owner's mark. The profile is extra-corvy, the blade has no pitting at all. Should make a great worker.
$35 This Item Has Been Sold



Crazy Griffiths Quirk Ogee, Ovolo, and Cove Molding Plane.
This is a crazy molding plane ins a couple of ways. First, the profile- it packs in three small elements- a quick ogee, ovolo and cove in a profile measuring just 5/8in wide and 1/4in deep at best. Second the blade is bedded at an almost unheard of 65 degrees. It was clearly meant for the toughest woods. The boxing has some slight chips, but nothing near the mouth. The blade is sharp and in excellent condition. The plane body is nice and crisp and clean with no damage. It's a most unusual molder made by one of the best British makers.
$60 This Item Has Been Sold



Early 18th Century Quirk Ogee by Okines, London.
According to Goodman, Thomas Okines worked in London from 1740-1770. This Plane exhibits the usual 18th century London characteristics including the deep hollow of the step, deep gouge cuts at the transition from the chamfer along the hand hold to the step, and the typical rounded wedge finial. It is in good, usable condition. it's seen some work in its time but is remarkable ell-preserved for a 240+ year old plane. The boxing is dead-on. The blade has some very light scattered pitting but is very good overall. It's a gorgeous early molder, older than the United States,and still in usable condition
$65 This Item Has Been Sold



18th Century Bilection Molding Plane.
This plane was made by Turner and John Greene who Goodman has working ca. 1771 in York. The plane cuts a scotia and cove, which Whelan calls a sash bilection profile. It's a gorgeous profile, both elements have the same height and scale. It's also an early plane and has all of the characteristics you'd expect to see. The blade is on the short side- the plane has definitely seen some work in its time, but it has minimal pitting and could be used for sure. There are some very old work holes, and an early and wel-done repair to the wedge. It's a gorgeous profile on an especially early British plane
$50 This Item Has Been Sold



Usable 1 3/8in wide Skew Rabbet by Marshall, Glasgow.
This plane has seen a lot of use but could easily be tuned into a fine working rabbet once again. The sole has some wear but it's straight and true. The blade needs a quick grind to set the bevel angle properly,. but it has a lot of life and minimal pitting. the wedge is possible a replacement, but it fits well. All told, a decent user skew rabbet with a small but fo work.
$25 This Item Has Been Sold



Massive Flat quirk Ogee Molding Plane.
This plane has no maker's mark I can see, but it's well made . The blade is bedded at a high 55 degrees or cabinet pitch. The profile is massive- 2 1/4in wide by 7/8in deep. The blade has some pitting. It's a huge profile that would be usable with some work, or an attractive bookend since it sits perfectly vertically on its sole
$20 This Item Has Been Sold



Excellent 1in Torus Bead.
This is a large, nearly unused Torus bead without a maker's mark I can see. The plane was expertly made and includes hammerhead boxing on the quirk in perfect condition. The plane is crisp and clean with a near perfect blade.
$25 This Item Has Been Sold



Small Reverse Ogee Molding Plane.
This plane cuts an attractive reverse ogee 5/8in wide by 3/8in deep. It was made by Holbrook, an early-mid 19th century planemaker working in Bristol. The cabinet pitch blade is slightly short, but the back is clean and has no pitting.
$25 This Item Has Been Sold



Gorgeous 3/16in Side Bead.
This is an exceptional British 3/16in side bead with a cabinet pitch blade. The plane has a makerís mark but it was over-stamped by an owner. If I had to guess, Iíd say itís an early-mid century maker, and definitely British. Itís very well-made and works quite well as-is. Iíve made a few test runs with it and Iím very happy with the way it works. It cuts a nice clean bead even with the blade in only somewhat sharp condition. The profile is fully boxed. The boxing is clean, straight and complete with a nice deep quirk. The blade is in excellent condition. Itís a top quality side bead in excellent user condition. 3/16in is the most commonly requested size- this one will be a perfect worker.
$45 This Item Has Been Sold



1 1/4in Nosing Plane by Owasco.
This double-iron nosing plane cuts a complete 180 degree round-over on 1 1/4in stock. It is in excellent condition with two perfect blades. It's a nice example in a larger than usual size.
$22 This Item Has Been Sold



decent matched pair of Ohio 1/2in H&Rs.
I think they could be a good working pair with a minimum of work. The blades are clean with lapped flat backs. There is no pitting.. There are no chips/cracks. Youíd need to do a bit of touch-up work on the hollow blade to give it a bit more curve is all. Itís a decent pair
$30 This Item Has Been Sold



Exceptional Denison 1/2in Skew Rabbet Plane.
Almost every small rabbet plane I find is warped or twisted to some degree. This one is dead- straight and has a sharp, honed blade. It came from the bench of a top craftsman who must have used it often. I tried it out just as I found it, with the blade set perfectly and it cut a nice crisp rabbet, ejecting nice paper-thin curly shavings. The blade is exceptionally clean and honed, as you see in the photos. It's a great working example in this hard to find size.
$50 This Item Has Been Sold



Exceptional Quirk Ogee and Astragal Molding Plane.
This plane has no maker's stamp that I can see, but it was clearly well-made by a professional maker. It's made from exceptional, perfectly quartered beech with bold, even ray fleck. The profile it cuts, which measures 7/8in wide and 3/4in deep, is exceptionally curvy and just dead sexy. The sole is double boxed with one strip at the quirk, the other at the start of the astragal. The blade is nearly perfect with zero pitting and possibly the original grind. The plane is quite clean overall and has no damage. It's a fantastic molder, just lacking the maker's mark.
$45 This Item Has Been Sold



Very Good Matched Pair of 5/8in Tongue and Groove PLanes.
this is a nice matched pair made by the Perth planemaker J. Wyllie who worked ca. 1860-68 according to goodman. Both planes are in very good working order. Both have very minor wear and some light dings and scratches from use and storage. Both blades are excellent. The planes cut a tongue and groove joint centered on 5/8in stock. IT's a perfectly usable pair that should make excellent workers.
$55 This Item Has Been Sold



5/8in Square Ogee Molding Plane by Burley, Glasgow.
This plane is in very good working order. The body is dark with tallow, and left with clear impressions of the formers owners' hands. It was madeca. 1892-1915 according to Goodman. The plane cuts a new 5/8in wide by 5/8in deep ogee. It has an excellent, near full-length blade bedded at York pitch. It has a clean back showing no pitting at all. It's a very good, usable plane with a useful small profile.
$40 This Item Has Been Sold



Exceptional Copeland 1 7/8in Skew Rabbet w/ nicker.
Copeland made some great molding planes- they are definitely one of my favorite American makers and a mark I look for when looking for planes to use in my shop. This is a beautifully made 1 7/8in wide skew rabbet with nicker. the mouth is extremely tight. the blade is sharp and the mouth tight. The dovetailed nicker is clean and long. The plane body is nice and crisp and clean, having seen little use. I love larger rabbets like this for the mass and the ease in keeping them vertical in use. It's an uncommon plane in top use condition.
$65 This Item Has Been Sold



Wm. Marples Small Flat Ovolo Molding Plane.
This is a small sash ovolo measuring barely 1/2in wide and 1/4in deep, much smaller than usual. It would make a nice decoration on the edge of a small shelf, box lid, etc. The york pitch iron is in excellent condition with zero pitting and a nice sharp bevel. It's in very good condition overall and should make an outstanding user.
$45 This Item Has Been Sold



Excellent E. Preston, Birmingham 1/2in Quirk Ogee Molding PLane.
This plane cuts a super-curvy 1/2in deep by 5/8in wide quirk ogee. It's a superb profile. It was made by Edward Preston, the famous toolmaker in Birmingham, between 1864-76. The plane is in very good condition overall. The cabinet pitch blade has some scattered pitting, but none right near the bevel so it should sharpen up easily enough. It's a super-curvy plane in good, usable condition.
$45 This Item Has Been Sold



Excellent Matched Pair of 7/8in Handlede Tongue and Groove Planes.
These are top-quality planes with beautifully shaped handles and steel faces on the fences to prevent wear. They will center a T&G joint on 7/8in stock but will work on 1in and will leave enough meat on the far side of the tongue to work on 3/4in stock as well. The pales are ine xcellent condition with no damage. They were made by Greenfield and have always been together. The blades are in excellent condition as well and have no pitting.
$65 This Item Has Been Sold



Excellent Cabinet Pitch 5/8in Side Bead by Griffiths.
This is an absolutely top-quality side bead in excellent condition. It has a nice clean blade, perfect boxing, and extra-clean body. It'll make an excellent worker, an ideal size for larger moldings, base, and casings, as well as architectural scale work..
$28 This Item Has Been Sold



Large E. Smith 1 3/4in wide Skew Rabbet with Nicker.
this plane has seen a lot of use in its time. The blade is on the short side, with a bit of light pitting, but it still has a log of life left in it still. The nicker blade is clean and sharp- it helps the plane cut cross-grain rabbets by slicing the fibres ahead of the main blade when working across the grain. It's seen some use, and could use a bit of tuning, but there's a lot of work in ti still. A rare and useful profile.
$30 This Item Has Been Sold



Curvy Quirk Ovolo and Astragal by Dyson, York.
This plane was made by John Dyson in York ca. 1802-1840 according to Goodman. based on the characteristics of the plane. I'd estimate it was during the latter part of that period. The plane remains in excellent user condition. The profile is double-boxed, both boxed strips remain straight and true. The blade is lapped and free of pitting. The profile measures 7/8in wide by 3/8in deep. It's a pretty profile in a usable plane
$40 This Item Has Been Sold



Exceptional Quick Ogeee and Bevel Molding Plane by P. Brooks, Hartford.
Peter Brooks was born in 1803 and made planes in Hartford up until about 1850 when he moved to MA. This plane is in exceptionally well-preserved condition. The body is crisp and clean, nicely patinated without a speck of damage. The blade is full-length, free of any pitting, and close to factory new. The plane's sold is boxed, the boxed quirk being straight and true without wear. The entire plane is crisp and clean, nearly completely unused. It would make a great cornice or casing molding. The profile is 1 3/4in wid eby 76/8in deep as measured and clearly marked on the heel. It's an exceptional plane.
$55 This Item Has Been Sold



Small Griffiths 3/8in Flat ovolo.
This plane has seen some use in its life, and has the dings and stains to prove it, but it remains in very good usable condition. The cabinet pitch blade is sharp and has a nice clean back free of any pitting. It's a scarce smaller profile and a perfectly usable plane.
$40 This Item Has Been Sold



Extra-Crisp 5/8in Cabinet Pitch Side Bead .
This plane was made by John Hall Tools in Swansea. It is in excellent condition and should make an exceptional working plane. The bodys is crisp and clean with no damage whatever. The boxing is perfect. The cabinet pitch blade is sharp. It has some pitting away from the working area and should sharpen up easily.
$24 This Item Has Been Sold



Exceptional 3/4in J. Buck, London 3/4in Side Bead Molding Plane.
This is a beautifully made plane with a double-boxed sole. It was mad ebu Joseph Buck in London at the 124 Newgate location ca. 18317-72. The plane is in excellent condition with no damage, very little wear, and perfect boxing. The cabinet pitch blad eis sharp and completely free of pitting as shown in the photos. It would be hard to find a better example to put to work.
$30 This Item Has Been Sold



Interesting Isreal White, Philda. 3/4in Side Bead.
This plane was made by the well-known Philadelphia planemaker Israel white. It has the "H" maker's mark according to AWP-IV. White often used exotic woods in his planes and this one has Lignum boxing which is quite striking with its bold delineations between heart and sap wood.. Overall it's in very good, usable condition with little wear overall.
$30 This Item Has Been Sold



Good Cabinet Pitch 3/4in Side Bead by Varvill.
This is a good, usable bead made by one of the best British toolmakers. The plane has been used and has some light wear as well as dings and scratches from storage. The boxing is dead-on. The blade has some light pitting.
$20 This Item Has Been Sold



Small 5/8in Flat Ovolo MOlding PLane.
This plane was made by J. Ramage, a name I can't find. It's slightly shorter than most. It cuts a nice 5/8in wide by 3/8in deep flat ovolo. the blade is short, but clean and usable.
$20 This Item Has Been Sold



Excellent Greenfield 7/8in Fenced Casing Molding PLane.
This plane cuts a simple thumbnail profile on 7/8in stock. It's used upright using the face of the board as the guide, not the edge like most molding planes. This type of plane is a strictly American invention, and used for casing moldings, profiling the rails and stiles of thick doors, Shelf edges, etc. The plane has fantastic ray fleck and is dead quarter-sawn. The blade is sharp and perfectly clean. It's a top example in usable condition.
$30 This Item Has Been Sold



Very Good 1/8in Side Bead by Wilson, New Castle.
This plane has a York pitch blade and an extra-clean body. The boxing is straight. The blade is quite clean with some pitting well away from the bevel. It should tune up easily and be a superb worker. It's a great example of this scarce and much sought after size.
$40 This Item Has Been Sold



Exceptional 1/8in Side Bead by Mathieson.
This plane is an example of the top-notch work Mathieson could do. The plane has a York pitch blade and an extra-clean body. The body has nice crisp, sharp edges and barely a scratch or ding. It's a superbly made plane, much better quality than the usual Mathieson products. Notice the way the ramp feathers to a near knife-edge where it meets the wedge. The wedge beds perfectly and produces a very satisfying "snick" when it's pressed home. The fit and finish is absolutely perfect. The sole is fully boxed.The boxing is straight and perfect. The blade is perfectly clean without a speck of pitting. It's sharp enough to work as-is and cuts a clean, crisp bead. It's a wonderful example of this scarce and much sought after size. They don't come much nicer than this.
$55 This Item Has Been Sold



Excellent Working Pair of 3/8in T&G Planes.
This is not a matched pair- one is a Mathieson, the other a Varvill, both top quality planes. They cut a T&G joint centered on 3/8in stock- a rare size to find. Both are in excellent condition and work well as-is. Though they are not a matched pair the joints mate exactly. I made a test cut and I'm happy with the way they work- see photos of the resultant joint in the photos. It's an excellent working set.
$40 This Item Has Been Sold



Matched Pair of 3/4in Handled T&G planes.
These planes were made by J. Denison in the mid-1800s in Connecticut. They are in good condition. The tongue plane has a rounded-off horn. The blades are good- see the photos. They need some tweaking to get them working perfectly but should be an excellent working pair with a minimum of effort.
$55 This Item Has Been Sold



Mathieson 1/2in Astragal Molding Plane.
This plane is in very good condition overall and should be a fine worker. It has seen use, and has some wear, but no damage at all. Based on the even, honest patina on the sole I believe this one started out life as an astragal and was not converted from a bead. The blade is excellent with no pitting, though it needs a quick grind an hone to perfect the profile.
$25 This Item Has Been Sold



Unmarked 1/2in Thumbnail Molding Plane.
This plane is unmarked and well-made. It has a cabinet pitch blade that cuts a 1/2in wide thumbnail, a nice profile for a drawer front, table edge, shelf, etc.the blade is in excellent condition with a flat, clean back completely free of pitting.
$25 This Item Has Been Sold



gorgeous Chapin 5/8in Reverse Ogee Molding Plane.
This is a H Chapin no. 128 5/8in deep, 3/4in wide reverse ogee with an especially curvy profile. The plane's wedge is a replacement, but fits well. The blade is clean and has zero pitting. It should be a fine user molding plane.
$30 This Item Has Been Sold



Sandusky 1/2in Skew Rabbet.
This is a completely usable small rabbet. The sole is straight and has no twist which is a common problem with smaller rabbets. The blade is sharp and in excellent condition.
$28 This Item Has Been Sold



Outstanding cove and Ovolo Molding Plane by Lund, London.
This plane was made between 1805-1831 according to Goodman. The plane cut a beautiful cove and ovolo profile 5/8in wide by 3/8in deep. The fence and ovolo, the two high-wear areas, are boxed with one wide strip. The mouth is very tight. The cabinet pitch blade has zero pitting and a sharp bevel. It should be an outstanding plane to cut this very appealing profile.
$50 This Item Has Been Sold



Interesting Flat Quirk Ogee Molding Plane.
This plane has no maker's mark, but two owner's marks including the EEL mark of Gene Landon. The plane has some unusual characteristics such as the forward-bedded blade and slightly shorter stature. It's made of beech and has some evidence of being fairly early. The blade is excellent with zero pitting. It looks completely usable to me.
$35 This Item Has Been Sold



Outstanding Astragal and Ovolo Molding plane by Brown & Barnard.
The partnership of Brown and Barnard dates to ca. 1800-02 according to Goodman. This plane sure doesn't look over 200 years old. It was incredibly well-kept and remains completely usable today. The body is crisp and clean. The blade is in excellent condition as well without a speck of pitting. It's a great, completely usable, example of this scarce, curvy profile..
$65 This Item Has Been Sold



Excellent Marples Wedge-Arm Sash Filliter.
This is a classic British sash fillister, a plane that cuts the rabbet to hold the glass in sash windows. It's in clean, crisp shape with no damage The erm ends are brass-capped and held in place with crossed boxwood edges. The blade has some light pitting, but nothing too bad that would prevent it from being used. It's a gorgeous, usable plane.
$70 This Item Has Been Sold



Excellent 7/8in Side Bead by Asling, Nottingham.
This plane is in excellent user molding plane in a larger size. The cabinet pitch blade has no pitting and a nice clean back. The boxing is perfect. The body has no damage.
$25 This Item Has Been Sold



Matched Pair of No. 12 Hollow and Round Molding Planes.
These planes were made by A. Howland. They cut a 7/8in wide arc. Both are in very good condition with minimal wear and decent blades.
$40 This Item Has Been Sold



Matched Pair of No. 17 Hollow and Round Molding Planes.
These planes were made by Robert Eastburn, New Jersey's earliest planemaker who worked from 1795-1826. The planes have a typical 18th century look with broad, flat chamfers. The planes are in excellent condition with nice tight mouths and decent blades with only light, scattered pitting. They should tune up with a minimum of labor. They cut an arc 1 1/2in wide.
$45 This Item Has Been Sold



Matched Pair of No. 19 Hollow and Round Molding Planes.
These planes were made by M. Copeland, one of the highest quality American plane makers of the 19th century. The planes are in excellent condition with nice tight mouths and nearly perfect blades.. They should tune up with a minimum of labor. They cut an arc 1 1/2in wide. It's an odd size, not normally found.
$50 This Item Has Been Sold



Stanley SW Era No. 81 Scraper.
This scraper is in good, usable condition. It has some wear on the hand handles including some minor finish loss. There is also some wear to the rosewood sole. The plane has its original SW logo blade in great shape.
$35 This Item Has Been Sold



Stanley No. 81 Scraper.
This scraper has at least 50% of its original nickel plating remaining. The rosewood sole has some wear as well. It has a nice long, clean blade with no pitting. The blade is not original, but a properly sized scraper blade made by Henry Disston & Sons. It looks like a good, usable scraper.
$35 This Item Has Been Sold



Near Mint Stanley 78 made for Wards.
This Stanley 78 was made for Montgomery-Ward. It is in near mint with all original finish, all parts, and a perfect, unused blade. I took the blade out of the plane and a bit of the original finish came off the bed and stuck to the blade- I suspect the blade was never removed from the plane since leaving the factory until just now. It's a top quality user plane ideal for cutting rabbets with and across the grain. You won't find one in better condition.
$60 This Item Has Been Sold



Exceptional Stanley 78 Rabbet & Fillister Ready to Work.
This is a freshly sharpened, complete, and excellent stanley 78. It has at least 95% original finish. The nickers are long and all parts are present. The blade has been polished and honed and is in perfect working order. It will work well right out of the box.
$65 This Item Has Been Sold



Stanley Bullnose Block Plane Near Mint IOB.
This is an English made plane with all of its original decal, in its original box, in near mint condition.
$24 This Item Has Been Sold



Good User Stanley 9 1/2 block plane. .
Some 90% of the original japanning remains. The adjustable mouth opens and closes easily. It has some patina and a bit of wear but the blade is excellent showing no pitting at all. It's a solid user.
$25 This Item Has Been Sold



Stanley No. 15 Block Plane.
This plane is the same as the more common no. 9 1/2, but a bit longer. It's been cleaned up and has some japanning loss. The blade is clean and sound and the adjusters all work smoothly. It will be a fine user.
$22 This Item Has Been Sold



Stanley sweetheart era number 80 scraper.
This scraper dates to the sweetheart era circa 1914 to 1920. It has almost all original japanning. The nickeled parts retain som of their finish. The blade is not original, though it is in excellent condition and has an Atkins logo. It's very good working example.
$45 This Item Has Been Sold



Very good Stanley "type 11" number 80 scraper.
Scraper dates to the "type 11" era, circa 1908 to 1918. It retains most of its original japanned finish. The blade is clean and in excellent condition, though it is unmarked.
$45 This Item Has Been Sold



Stanley No. 80 rabbet and Fillister Plane.
This is an excellent pre-World War II example in perfect user condition. The plane has at least ninety five percent original japanning. The blade is long and has no pitting at all. the fence and depth stops are both present the nickers are long and unused. It has some minor discoloration of the soul what is otherwise in excellent condition. It should make it an exceptional worker.
$65 This Item Has Been Sold



Stanley no. 98 Side Rabbet Plane.
This plane dates to ca. 1895-1902. It has the Jav 28, 1895 patent date on the toe and B mark on the casting. It is in good, usable condition. The blade is clean and has no pitting. The rosewood knob has a small chip. Most of the original nickel is present.
$40 This Item Has Been Sold



Exceptional Stanley No. 78 SW Era Rabbet and Fillister Plane.
This is one of the more useful universal rabbeting planes made- the 78 will cut rabbets of any width or depth both with and across the grain. This example is in little-used condition with almost perfect original japanning, and a full-length, unused blade. It has the SW mark on the blade and 6-7-10 patent date on the body. The nickers are all full-length. the depth stop has a tiny bit of japanning loss, which is the only flaw really. It should be a great user plane
$65 This Item Has Been Sold



Exceptional Stanley No. 78 "Type 11" Era Rabbet and Fillister Plane.
This example is in little-used condition with almost perfect original japanning, and a full-length, near perfect blade. It has the "V" mark on the blade and 6-7-10 patent date on the body. This one is slightly earlier than the other I have listed- this one lacks the depth adjuster that was introduced shortly after this plane was made. The nickers are all full-length. the depth stop has a tiny bit of japanning loss, which is the only flaw really. This is one of the more useful universal rabbeting planes made- the 78 will cut rabbets of any width or depth both with and across the grain. Made during Stanley's heyday, it should be a great user plane
$65 This Item Has Been Sold



Ready-to-use Stanley 9 1/2 Block Plane.
this is the best standard-angle block plane out there. It was made by Stanley in Canada. It's in very good condition with minor wear. The adjusters work perfectly and the mouth opens and closes easily. The blade is freshly ground, honed, and polished to a deadly edge. It's ready to go out of the box. An excellent working example.
$40 This Item Has Been Sold



Very Good Stanley no. 48 Tongue and Groove Plane.
This plane was made ca. 1900 and has the "B "casting mark. Both blades are original and in excellent condition. The Frame is missing some plating in the usual high-wear areas. The wing-arm fence works well and stays tight. A solid user T&G plane.
$50 This Item Has Been Sold



Stnaley no. 18 Knuckle-Joint Block Plane.
This is a very good working example of one of Stanley's better block plane designs. The knuckle-joint cap is easy to set, keeps the blade put, and feels great in the hand. This is essentially a Stanley 9 1/2 with the special cap. It is in very good condition with almost all nickel on the cap and a very sharp blade. It should be an outstanding user.
$30 This Item Has Been Sold



User-Grade Stanley 65 Low-angle Block Plane.
This is a knuckle-joint low-angle block plane, one of Stanley's better block planes. It has a very small, tight crack int he corner of the mouth where the casting is suer thing. At least 50% of the 65s I find have the same crack. This one is a cosmetic issue only and should not affect use at all. If it ever becomes a problem feel free to return it. The blade is in excellent condition and the adjuster is not stripped out, another common flaw in these planes.
$30 This Item Has Been Sold



Excellent Stanley 9 1/2in Block Plane.
Thi is the best standard angle block plane Stanley made. It's in excellent working order with nearly complete japanning and a very sharp, honed blade. There is no pitting on the back of the blade at all. All of the plane's adjusters work perfectly. It's a solid suer plane in great shape.
$30 This Item Has Been Sold



Stanley SW Era no. 75 Bullnose Rabbet Plane.
This is an excellent example with almost perfect japanning and a nice crisp SW era blade.
$20 This Item Has Been Sold



Good, Usable Stanley 9 1/2 Block PLane.
This is a good user block plane, one of the best standard angle planes Stanley made. It is clean with a nice long blade. There is no pitting at all on the back of the blade. The mouth and blade adjusters work fine.
$25 This Item Has Been Sold



Excellent Union no,. 5 Jack Plane.
Union was one of Stanley's very few competitors in the early 1900s. This is a high quality jack plane with the typical thick Union blade that makes a big difference in helping to reduce chatter. The knob and tote are near perfect. The plane body has a few dings and at least 98% japanning. The adjusters work smoothly. The blade has no pitting. It should sharpen up easily and become your go-to jack plane.
$45 This Item Has Been Sold



Clean Stanley no. 3 Small Smooth Plane.
For the work I do the no. 3 is my favorite size smooth plane. This plane has all of the pre-WWII features but the blade is dated 3/46 which puts it righ tat the end of WWII. The plane is in perfect working order. The blade has no pitting at all on the back. The knob and tote have no damage. It's going to be a top-notch user.
$55 This Item Has Been Sold



Exceptional Stanley no. 4C sweetheart era smooth plane.
This plane is in exceptional condition. It has 100% of its original japanning. The sides and sole are clean with minimal wear and an honest, even patina. The plane has not been cleaned up. It was used carefully and well cared for. The rosewood knob and tote are nearly perfect. The adjusters worked flawlessly. The blade is long and has a bold sweetheart logo, And has no pitting on the back, only minor discoloration. It's about as nice as they come. It should be an exceptional user smooth plane.
$70 This Item Has Been Sold



Excellent Stanley number three small smooth plane.
This plane dates to just after World War II. It is in excellent condition all original finishes on the bed, knob, tote and chip breaker three the blade is original length and has a zero pitting at all on the back. It might have been used once or twice and shows almost no wear at all. It's about as nice as they come.The adjusters are smooth and accurate. It looks at the great small smoother to put to use.
$55 This Item Has Been Sold



User grade Stanley number 4 1/2 large smooth plane.
This is a sweetheart era number 4 1/2 plane in good usable condition. The plane has seen considerable use and it has the dings, scratches, and general wear patterns you'd expect to see. The plane remains and in good working order. The blade has a good bit of life left. It is in good shape with zero pitting on the back. The adjusters work fine. The Rosewood knob and tote have some wear and in a small chip from the top horn of the tote. TheOriginal japanning is about 90%. It's a decent user smooth plane for user, not a collector.
$75 This Item Has Been Sold



Excellent Stanley no. 7 jointer plane.
This plane is a type 6,dating to between 1888-92. The plane is an excellent user condition. It has almost all of its original japanning on the bed. The Rosewood knob and tote are exceptional with no damage at all. The adjusters all work smoothly. The blade is long, nearly full-length, and has absolutely no pitting at all on the back. It has some honest patina and discoloration of the sides, but it could be cleaned up if you choose. It's a good looking, perfect user jointer plane.
$135 This Item Has Been Sold



Excellent Stanley no. 7C type 11 jointer plane.
This is a true Type 11 with three patent dates on the bed, the "V" logo blade, low knob, and small adjuster wheel. It is an excellent user condition overall. The blade is nearly full-length, and has no pitting at on the back. The back has been lapped clean and flat and will sharpen easily. The Rosewood knob and tote have no damage at all. The japanning is near-perfect. The plane is in uncleaned condition and has not been messed with. The sides and sole have some like discoloration which you could clean if you wish. It's an excellent user to put to work.
$150 This Item Has Been Sold



Exceptional Stanley no. 7C Sweetheart era jointer plane.
This plane is a type 15. It dates to 1931-32. This is the last of the sweetheart models. It is in exceptionally fine and clean condition with all japanning. The bare metal has barely any discoloration or wear at all. . The Rosewood knob and tote are perfect. The lever cap Is missing a tiny bit of nickel, which is about the only fault. The blade is full-length, clean, and has zero kidding. If you are looking for jointer plane put the work this is it.
$150 This Item Has Been Sold



User grade Stanley no. 8C jointer plane.
This plane was made immediately after World War II. It is in good, usable condition. It has dark, even discoloration on the sides console. It's missing a bit of japanning, perhaps 90% remains. The knob and tote have some finish loss but no chips or cracks. The blade is nearly full-length. It has a tiny bit of pitting right at the leading edge but quick grind Will remove it. The rest of the back of the blade is clean and has a lot of useful life left. The adjusters work fine. It's a decent user jointer plane.
$120 This Item Has Been Sold



Very early Stanley no. 8 jointer plane.
This plane is a type 4 dating to 1874 Ė 84. It is a pre-lateral plane in good, usable condition. It has seen a good deal of use over it's life to the point fat the original blade has only about 3/8 of an inch of life left. I have included a slightly later blade with A good bit of length left in a nice clean back. The original rosewood knob and tote are in good shape with only one or two tiny chips out of the porn of the tote. Otherwise the rosewood is clean and has exceptionally nice grain and color. The bed has some random paint splotches and minor finish loss. The blade adjuster works smoothly. The sides and sole are relatively clean without any rust and only slight discoloration. It's a good, usable released in the plane.
$145 This Item Has Been Sold



Stanley number 5 1/4 Junior jack plane.
This is a pre-World War II plane in very good working order. It has light discoloration on the sides and sole which could be cleaned if you choose. The japanning is almost perfect. The blade is long and clean with a lapped back. The adjusters work fine. The Rosewood knob and tote have no chips or cracks. There is an owners mark on the tote. The is a solid user jack plane with a one and three-quarter inch wide iron.
$50 This Item Has Been Sold



Stanley number 605 Sweetheart era Jack plane.
Is playing dates to 1923 to 26. It is a sweetheart era plane with all proper parts. This is a Bedrock type 7 according to type study. The plan is in excellent user condition. The Japanning is at least 95%. The sole and sides have some minor discoloration. The plane has not been cleaned or messed with. The Rosewood knob and tote have minor wear but no chips or cracks. The blade is full-length, clean, and without pitting. It should make an exceptional working jack plane.
$135 This Item Has Been Sold



Exceptional Millers Falls no. eight small smooth plane.
This is the Millers Falls equivalent of the Stanley number three. This example is in excellent condition. It has 100% japanning. The knob tote have a few flakes of finish loss, the only flaws. The two piece patented lever cap has all nickel plating. The blade is long and clean with a lapped flat back and zero pitting. The side and sole are clean and crisp. It will make an exceptional small smoother to put to use.
$45 This Item Has Been Sold



Stanley Bedrock number 603C small smooth plane.
This is a bedrock type 6, Dating to between 19 18 and 1921. It has its proper sweetheart era blade and embossed bedrock lever cap. It is in very good user condition. It has been cleaned up a bit, And show some wear.. The tote has a tight, well repaired crack. The japanning is at least 95%. The blade is in excellent condition with a lapped, flat back without any pitting. The bevel is sharp and has no dings or chips. It's a good, solid user Bedrock smoother.
$150 This Item Has Been Sold



Pre-War Stanley no. 3 Small Smooth Plane.
This is an excellent working example made in 1936 according to the date stamp on the blade. It has almost perfect japanning. It has light, hoest discoloration on the sides and sole. The rosewood knob and tote are exceptional with no damage at all. The blade is full-length and has no pitting at all. There's some light, honest discoloration on the sides which could be easily cleaned up if you want to. Either way it will make an outstanding user.
$60 This Item Has Been Sold



Stanley SW Era No. 24 Transitional Smooth Plane.
This is an excellent example with clean, crisp wood and japanning ont he metallic parts. The SW logo blade is in excellent condition- full-length and with zero pitting at all on the back,. The sole is clean and has no wear, but it does have a chip well in front of the mouth, not interfering at all with the mouth itself. The adjusters work easily. This plane is the transitional version of the no. 4. It should be an excellent worker, a good general-purpose smoother for those that appreciate the rood-bottom Stanley planes.
$30 This Item Has Been Sold



Outstanding Stanley type 15 Sweetheart Era no. 4 Smooth Plane.
This is a type 15 made between 1931-32, the last of the SW planes. This example is in excellent condition. It has a few specks of discoloration ont he sides, which is about the only flaw. The lever cap has nearly perfect nickel. The japanning is all there. The knob and tote are perfect. The blade is flat,free of any pitting, and looks unused. The adjusters work perfectly. It's a nearly perfectly preserved example from Stanley's heyday, ready to be put to use after sitting idle for 80+ years.
$75 This Item Has Been Sold



Early Wartime Stanley no. 5 1/4 Junior Jack Plane.
This is an early wartime plane with some of the wartime sacrifices, but still with the frog adjusting screw. it has hardwood handles and steel nuts, but still has a brass adjusting wheel, not bakelite. The plane remains in excellent user condition. The body is in excellent condition with more than 99% japanning and nice honest patina on theh sides and sole. The hardwood knob and tote are losing some original finish. The blade is near perfect with a mirror-like polish on the back nearest the bevel. There is no pitting at all. It will mke an outstanding user small jack plane.
$55 This Item Has Been Sold



Stanley no 5 Type 11 Jack PLane.
This is a true type 11 with the three patent dates, low knob, small adjuster wheel, and origina lV logo blade. The plane body has near perfect japanning, and some light, honest discoloration on the side sna d sole. No attempt has been made to polish it, though it would clean up if you want. The knob and tote have no damage at all. the adjusters work well. The plane was used a bit and stored with shavings in it. This left a line of pitting straight-across the blade right where the chipbreaker meets the blade. The steel in front and in back of that is fine, but that one line of pitting will need to be ground away quickly once you reach that point. Otherwise it's a fantastic user no,. 5.
$45 This Item Has Been Sold



Stanley No 5 type 7 Jack PLane.
This plane dates to ca. 1893-99. It has a nice, honest look to it, the look a 100+ year old plane that was used carefully should have. The japanning is about 95%. The side and sole are clean with some patina. The tote and knob have no damage and are original to this plane. The blade is in exceptional condition with a nice polished back and quite sharp bevel. the adjusters work fine. it's an outstanding user jack plane.
$50 This Item Has Been Sold



Mint Stanley England No. 50 Plow, Bead, T&G, and Rabbet Plane.
This is a dead mint no. 50 complete with all the parts and bits it came with originally including the often-lost blade retaining screw (required when using the 1/8in and 3/16in plow bits) and the chip deflector , (required when the tonguing blade is in use). the plane has all of its original finish. The blades are all present. They are in excellent condition, all have been honed and polished and are ready to work. The box is in excellent condition. It's a great small plow to put to use.
$150 This Item Has Been Sold



Excellent Stanley No,. 7c Jointer Plane.
This plane is a type 12, the first of the Sweetheart models. It has three patent dates on the bed, a high knob, and SW log on the blade. It has an even honest patina on the sides and sole and has not been cleaned. The japanning is at least 95%. It looks like a plane that was used, cared for, and stored properly for around 80 years. I wish they all looked like this. The knob and tote have no damage at all. The blade is near full-length, has a nice sharp bevel with no dings or chips, and has a flat, clean back without a speck of pitting. It'll be an outstanding user jointer plane- if you want one to put to work, this is it.
$140 This Item Has Been Sold



Pre-WWII Stanley no. 7 Jointer Plane.
This plane was made in the 3rd quarter according to the date stamp on the blade. The plane is in good condition and will make a perfect user. The sides and sole have some discoloration, dins, and scratches, but no rust or pitting and no damage at all. The japanning is close to 100%. The knob and tote have some dings but no chips or cracks. The adjusters work well. The frog, blade and cap were coated with some sort of dark finish, perhaps old cosmoline. Most of it came off and the adjusters work easily and accurately, though there is some residue. The blade is long, has a reasonably sharp bevel, and no pitting whatever. It's a solid, user-grade jointer
$90 This Item Has Been Sold



Excellent pre-WWII Stanley no. 5 Jack Plane.
This is an excellent example in well-preserved condition. It is clean with at least 98% japanning overall. It hasn't been cleaned and has a nice, honest patina. The rosewood knob and tote are exceptional with especially nice grain and color. The blade is in near perfect condition and has the 238 date code indicating it was made in the 2nd quarter of 1938. It should be an outstanding user jack plane.
$50 This Item Has Been Sold



Exceptional Wartime Stanley no. 6 Fore/Jointer Plane.
this plane was likely made at the beginning of the WWII era- it has some wartime economies but not all. The adjusting wheel is brass while the knob and tote bolts are steel. The knob and tote are finished hardwood, not rosewood. The plane is in excellent condition. It has very light discoloration in a few small areas on the sides and sole. It has not been cleaned. The japanning is perfect. The lever cap has all original nickel and paint. The knob and tote have near perfect original finish and no damage at all. The blade is full-length and has not a speck of pitting or discoloration. It should be an outstanding jointer or fore plane to put to work.
$60 This Item Has Been Sold



Excellent Stanley no. 3 Small smooth Plane.
This plane is in outstanding original condition with no damage. The sides and sole have a light patina, the japanning is perfect. The knob and tote have specks of finish loss but no damage. The adjusters work perfectly. The blade is full-length and has zero pitting. It should be an outstanding worker.
$60 This Item Has Been Sold



2 3/8in Double Iron by Butcher.
This is a long, tapered, laminated double iron made by W. Butcher in Sheffield. It has the typical Butcher logo with the arrow and Maltese cross. The back has zero pitting and has been flattened and polished as you can see. It's a massive blade, nearly 3/16in thick at the business end.
$20 This Item Has Been Sold



Big Disston 16in Tenon Saw.
This is a 16in long saw with a 4in deep plate beneath a thick, heavy brass spine. The plate is dead straight. It has an even, honest patina but no damage. The teeth aren't sharp but they are in good shape and won't take much work to get sharp. The handle has minor finish loss but no damage. It should be a great user tenon saw once sharpened.
$40 This Item Has Been Sold



Disston 12in Backsaw.
This is a Disston Jackson or Keystone backsaw with the Keystone Warranted Superior logo on the medallion. The plate is dead straight and clean. The teeth aren't great, but they are sharp and the saw does cut pretty well. The teeth are somewhat inconsistent. The handle had no damage. It's a solid worker backsaw at a bargain price.
$24 This Item Has Been Sold



Bargain Disston no. 4 12in Backasaw.
This is a 12in backsaw with a 4in deep plate. It's a top quality saw made ca. 1896-1917. The plate is dead straight and has no pitting at all. The apple handle has truncated top and bottom horns, not cracked, just purposely shortened. It will still work just fine.
$26 This Item Has Been Sold



Disston 12in Backsaw.
This is a Disston Jackson or Keystone backsaw with the Keystone Warranted Superior logo on the medallion. The plate is dead straight and clean. The teeth are in very good shape and the saw cuts quite well. It tracks straight and cuts smoothly.The handle had no damage. It's a solid worker backsaw at a bargain price.
$30 This Item Has Been Sold



Decent Atkins 26 inch eight point crosscut saw.
This is an good usable condition. The blade has even discoloration on both sides. The teeth are reasonably sharp, all well formed, and it cuts well. The Apple handle is nicely embossed and has no damage at all. All of the brass screws are nickel plated. It's a decent user crosscut saw in a good general-purpose configuration.
$45 This Item Has Been Sold



Exceptional Disston 26 inch number 7 crosscut saw.
This saw dates to 1896 to 1917. It has an exceptionally clean blade with no pitting all in a crisp, clear action. The nib is present. The teeth are all well formed. They are reasonably sharp and none broken. It retains all of its original breasting along the tooth line. It cuts very well although the teeth aren't terribly sharp. The beech handle has no damage at all. It's an exceptional user cross cut saw in a perfect general-purpose size and configuration
$85 This Item Has Been Sold



Excellent Disston number D23 26 inch 8 PPI cross cut saw.
This song has a crisp, clean, straight plate with bold action. The teeth are sharp and it cuts well. The Apple handle is in very good condition with minimal wear. It's a good user crosscut saw in a general-purpose configuration
$45 This Item Has Been Sold



Excellent working example of the Atkins number 400 rosewood handled rip saw.
This is a fantastic user ripsaw with a 26 inch plate and 5 1/2 teeth per inch. The teeth are quite sharp. It cuts well tracking straight and cutting it very fast. Teeth have no damage. The plate is dead straight. Like most I can saws the etch is ha ha very light but it is there. The rosewood handle has all original finish. It has an outstanding grain color and definition. The saw screws are nickel-plated. It's a well preserved early example of Atkins' top of the line saw in excellent working order.
$80 This Item Has Been Sold



Excellent Disston no. 7 26 inch crosscut saw.
This is an excellent working example dating to circa 1917 to 19 40. It has a perfectly straight plate. The etch is clear and crisp. There is no rust in the nib is present. It has seven points per inch making it a good general-purpose size. The beech handle hasn't really repaired to the top horn which is nearly invisible. Otherwise the handle is in excellent condition. It should make an exceptional user crosscut saw for all types of work.
$60 This Item Has Been Sold



Disstion number 12 26 inch ripsaw.
They saw is not the prettiest but it's usable. It has a 26 inch plate with five points for per inch. The plate is straight. It has scattered pitting throughout the front and back but on a rip saw this isn't the end of the world. The teeth are all well formed. They are relatively sharp and the saw cuts surprisingly well. The Apple handle has an early repair to the top horn but is otherwise complete an excellent it's a bargain user ripsaw made the finest Disston steel.
$45 This Item Has Been Sold



Disston No. 7 26 inch ripsaw.
This saw dates to 1917 to 1922. It is 26 inches with 5 1/2 point per inch. The plate is dead straight. The nib is present. The teeth are all in excellent condition. The beech handle test most all original finish and no damage at all. The front does have scattered discoloration. The etch is visible. The back has more considerable discoloration and scattered pitting though not near the truth line. The tooth line does retain its original breasting. It should be an exceptional user ripsaw
$70 This Item Has Been Sold



Massive Disston number 7 28 inch ripsaw.
This saw has a 28 inch plate and a full 2 7/8 inches at the toe. It dates to circa 1896 to 1917. The plate is dead straight. It has even honest discoloration throughout. The neighbor is present. The teeth are all in excellent order and quite sharp. Bluetooth one retains the original breasting. This saw works well in tears through stock with its4 1/2 points per inch. The handle is beach and has some dings and scratches but no chips or cracks it's a massive rip saw for big work.
$75 This Item Has Been Sold



Disston 6in stair saw.
This saw is an excellent to Nearman condition. The beech body has no wear, chips, or cracks. It has a bold inchworm style logo dating into the 1870s. The blade is perfectly clean and has no piting. The teeth are all well formed and fairly sharp. It adjusts easily and stay set. It may be the nicest example I've come across and should make a great worker.
$60 This Item Has Been Sold



Gorgeous, early Marples and Sons keyhole saw.
This saw has an 8 inch blade which is almost perfectly straight and has nice reasonably sharp teeth. The handle is beautifully shaped. The beach handle has no chips or cracks. The original brass split nuts have never been tampered with. It has a very early appearance. There is a small chip missing from the tip of the blade but that could easily be rectified if you wish. Overall it's a gorgeous, usable small compass saw.
$25 This Item Has Been Sold



Scarce and Excellent Simonds Sawmakers Straight Edge.
This is an 18in. saww maker's straight edge made by Simonds in Fitchburg, MA. It is in excellent condition with a crisp Simonds logo. The reverse side has an owner mark: Saw Shop, Lane Mfg Co, Nov 1949. I believe this is the same Land Mfg. Co tha tmade sawmills, waterwheels, cranes, stone tools, etc. in Montpelier, VT. It's a scarce tool to find today and an interesting piece of Vermont history.
$45 This Item Has Been Sold



Excellent Rosewood 12in Bowsaw.
This saw is made from sort of dense, close-grained rosewood. It is in excellent working order. It has no damage and holds its 12in blade perfectly tight. It comes with one extra 12in blade.
$70 This Item Has Been Sold



Excellent Vintage Marples 12in Beech Bowsaw.
This is a top quality Marples bowsaw with a 12in blade. It is in excellent working order with no damage.
$70 This Item Has Been Sold



Disston Stair Saw.
This is an early example with the "inchworm" style logo. The beech handle has a very well-done repair to a crack in the thinnest part- it's glued and neatly screwed and perfectly sound- I've tested it. The blade is in excellent condition without pitting. It's clean and complete with just a few dings. It will be a great worker at a bargain price because of the repair.
$30 This Item Has Been Sold



Excellent 11in Bow Saw.
This is a very nice, user-made mahogany bow saw that accepts11in blades. The frame and boxwood handles are in excellent condition. The blade is pretty sharp. It's a well-made, usable bowsaw in a useful smaller size.
$65 This Item Has Been Sold



Superb William Johnson, Newark, NJ 18in Bow/Turning Saw.
This is an excellent working bow saw with an 18in blade. It was made by William Johnson, also known f rtheir fancy spokeshaves and leather tools. this example has what I believe to be sycamore arms and stretcher and perhaps apple handles. The bowsaw is in excellent condition overall with no damage. It's a fantastic example, and a rare American marked saw.
$75 This Item Has Been Sold



Outstanding 18in Bow/Turning Saw.
This is a wonderfully made turning saw with nicely shaped arms, including shapely "hooks" at the end of the arms to retain the string. The paddle is nicely turned and carved. The blade is in excellent condition, as are the handles. It has no damage or wear. It's a beautiful saw in excellent working order.
$80 This Item Has Been Sold



Unmarked 12in Brass Back Saw.
This saw has a 12in plate 3 1/4in deep under the brass spine. It has a nondescript beech handle. The saw is in excellent condition. It is completely unmarked. The blade is perfectly straight with good teeth. It's a solid user backsaw
$25 This Item Has Been Sold



Extra-Large 16in Tenon Saw.
This is a beast of a backsaw with a 16in long, 4in deep plate under a thick folded steel spine. The plate has no pitting and it's dead straight. The teeth are all in good shape but could use a quick filing. The handle in in good shape as well with no cracks or damage. It's got a bit of shape to it, so I don't imagine it's too recent. It has an etch on the blade that I can't quite make out, looks like Craftsman with the ca. 1940 logo but I can't tell for sure. It should be a fine user.
$30 This Item Has Been Sold



Excellent Disston 12in Backsaw.
This is a clean, crisp 12in backsaw with a nearly perfect apple handle. The handle design is ca.1896-1917 but the medallion is a generic eagle. I'd say it was made for a hardware store, but the spine is stamped with the Disston logo. The blade is straight and clean with a tiny patch of pitting on the back but away from the tooth line. The teeth aren't great- it will need a reworking, well worth it for this fine saw.
$45 This Item Has Been Sold



5in Fret Saw.
This saw is in excellent condition. It was made by the Trojan AS Co. ca. 1900 according to the EAIA DAT.
$15 This Item Has Been Sold



Millers FAlls no. 377 Jewelers Saw.
This is a scarce jeweler's/fret saw capable of holding blades 3-6in in length. It has a rosewood handle and most of the original nickel on the frame. The blade is clamped in the frame at both ends as usual. The blade is then tensioned by turning a knurled nut that expands the length of the fram. It's a simple, effective design.
$25 This Item Has Been Sold



Scarce Disston No. 7 Panel Rip Saw.
I've seen only one or two true panel rip saws- this is one of the better ones. It's a ca. 1896-1917 no. 7 with an 18in plate and 8PPI. The nib is present and the plate is straight. It has scattered discoloration but the etch is bold and clear. The plate has only been wiped off, not cleaned. It's probably that with a bit of skill and time the discoloration could be polished out. The saw has a secondary etch stating it was made for the J.B> Hunter Company at 60 Summer Street in Boston. Hunter was a hardware company that existed in the early 1900s and sold all sorts of tools and fly fishing tackle (if you are into that sort of thing). the beech handle is nearly perfect. The nib is present and the plate is a full 2 3/8in deep at the toe. The teeth are all in good condition with no damage, though it's not sharp. It will need a quick filing to get it up and running, but no major work. It's a great little saw in a rare configuration.
$85 This Item Has Been Sold



Small Cincinnati Saw Co. 18in Fine Crosscut Panel Saw.
This saw is in excellent condition with a clear, crisp etch, a dead straight plate, and perfect teeth. All of the teeth are in good condition with no damage. they are not terribly sharp so it'll need a quick filing to get it up and running. At 12PPI it would be used for the finest work. The Cincinnati Saw Co. was a brand name used by the George Bishop saw company. It's a cute little panel saw in great condition.
$50 This Item Has Been Sold



Disston D-23 Extra-Fine 11PPI Crosscut Saw.
This is a 26in handsaw with a dead straight plate and 11PPI for the finest crosscuts. The handle has a few small chips but is very good overall. The plate is clean with a clear, crisp etch. The teeth are all in good order and decently sharp, though it could use a quick touch-up. It should be a great user crosscut saw.
$35 This Item Has Been Sold



Disston -23 26in Rip Saw.
This is a 5 1/2PPI Rip saw in excellent condition. The plate is dead straight and has sharp teeth. It cuts well, tracking straight and true. It could benefit from a light filing, but major tooth work will not be necessary. The plate has a crisp, clear etch. The handle has no damage, just minor specks of finish loss. The blade does have a small etched serial no. towards the handle. It's an excellent user rip saw.
$45 This Item Has Been Sold



User-Grade Disston no. 16 26in Crosscut Saw Ready-To-Use.
This saw is sharp and ready to work. It has 8PI and makes quick work of cutting 3/4in hardwood to length. I tried it numerous times and I'm happy with it. The plate is dead straight. It's dark, but honestly so with no pitting or rust. The etch is there, if faint. The nib is missing. It dates to 1896-1917 based on the medallion. The handle has a few dings, and a very tight check near the medallion, but no real problems. It's a great user crosscut saw in a popular configuration.
$60 This Item Has Been Sold



Exceptional Disston D-7 Fine 8PPI RIp Saw.
This is a barely used and well-preserved D-7 dating to 1928-40 based on the etch and medallion. The saw is in superb condition. the plate is clean and dead straight. It is 2 1/4in deep at the toe. The plate has not a speck of pitting or discoloration. The etch is crisp and clear as the day it was made. The handle has all original finish The saw is a scarce 24in 7PPI rip saw. The teeth are all in excellent condition and fairly sharp. It could benefit from a quick filing, though no major tooth work will be needed. It's a fantastic example and will make a superb user.
$70 This Item Has Been Sold



Ready-To-Use Disston D8 Thumbhole Rip Saw.
This is a 26in saw with 6PPI. The saw was recently sharpened by its former owner. The teeth are in good shape- it's not the job of a master sawsmith, but the teeth are sharp and the saw rips through 3/4in stock with little effort. The tooth line retains the original breasting. The apple handle has some faint figure and only a tiny ding in the top horn in the way of damage. The plate is straight and clean with a crisp etch. It dates to 1896-1917 based on the medallion and etch. It's a fantastic rip saw ready to use out of the box.
$100 This Item Has Been Sold



Disston Wartime D-8 Rip Saw.
This is a 26in 5 1/2PPI rip saw in excellent condition. The plate is clean and dead straight with a crisp, clean etch. The teeth are all in good shape though they are not sharp. It won't require a lot of work, just a jointing and filing. The handle has some finish loss but no damage. It should be a fine user once sharpened.
$45 This Item Has Been Sold



Ready-To-Use Disston no. 7 Crosscut Saw.
This is a great user saw- my favorite model Disston to use. The no. 7 has a beech handle and easy-to-use cast steel blade that 's perfect for inexpert sawyers like myself. The plate is straight. The teeth are all sharp and excellent. It tears through 3/4in hardwood stock when I tried it out. It'll make a great saw to rough cut stock to size. The plate has an even, honest overall patina and has not beenc leaned. The beech handle has almost obscene ray fleck from it being perfectly quartered. The nib is present. It's a fantastic user crosscut saw to put to work right out of the box.
$75 This Item Has Been Sold



Early Atkins no. 69 "REX" Handsaw.
This is an early "Rex" handsaw, Atkins' top-of-the line model. This one has the wheat-carved, not pressed floral pattern, on the handle. It also has a pronounced "bump"in the top handle, another giveaway to its relative age. The saw has a 24in plate with 7PPI crosscut. The plate is dead straight. It has an even, honest level of patina throughout and has not been over-cleaned. The etch is very faint, as is usual for Atkins saws, but the Rex logo design is unmistakable. The handle has a small, old chip ou tof the bottom of the top horn. It is a full 2 3/4in deep at the toe. It should sharpen up to be a great use saw.
$50 This Item Has Been Sold



Disston 10in Dovetail Saw.
This is a straight-handled dovetail saw with a dead straight plate, clear etch, and reasonably sharp teeth.
$15 This Item Has Been Sold



Disston no. 68 8in Brass-Back Dovetail Saw.
This is a small dovetail saw with a straight plate and clear etch. It comes with a wooden keeper to protect the blade.
$22 This Item Has Been Sold



Interesting European PAtent Wooden Smooth Plane.
This horned smooth plane has two patent number stamped on the toe- an Austrian patent 42079 and Hungarian patent 48559, both of which cover the domed profile of the heel of the plane. This domed profile makes the plane more comfortable to use and prevents splitting when struck to release the blade. The blade is an interested John Weiss & Son 23mm (just under 2in) double iron. The iron has a built-in adjusting mechanisim to allow the iron to be set/retracted by turning a screw. The plane's sole has been reinforced with a rosewood block in front of the mouth. It's in very good condition overall. The blade is massive- tapered and laminated. It has no pitting at all on the back. It's an interesting and completely usable wooden bench plane.
$35 This Item Has Been Sold



Near-Mint, Unused Marples 1 1/2 in Rabbet Plane.
This plane is in near mint condition all of its original decal on the body. The wood is crisp and clean, nearly factory-fresh. If you ever wondered what planes looked like when they were bought new from the hardware store, this is it. It hasn't been used, or changed at all in any way. There are a couple of tiny dings on the corner of the hand-hold to the left of the wedge,literally the only thing keeping me from calling it mint.. the body is dead straight with no twist. The corners of the sole are sharp. The blade is factory-new. It's a beautiful piece of history- buy it to use and enjoy it for decades.
$65 This Item Has Been Sold



Near Mint Marples 1 3/4in Smooth Plane.
This is an exceptional wooden bench plane made by Marples in Sheffield. The plane has never been used and is in near mint condition with clean, crisp wood and most of the original decals remaining. The massive Marples blade is in new, unused condition as it was when it left the factory. The mouth is super tight. There are three tiny things on the right side of the blade across from the wedge, the only tiny defects that keep me from calling it mint. This example is as clean as you will ever find. Buy it to use and put it to work for many decades.
$70 This Item Has Been Sold



Near Mint Marples 1 3/4in Smooth Plane.
This is an exceptional wooden bench plane made by Marples in Sheffield. The plane has never been used and is in near mint condition with clean, crisp wood and most of the original decals remaining. The massive Marples blade is in new, unused condition as it was when it left the factory. The mouth is super tight. There are three tiny things on the right side of the blade across from the wedge, the only tiny defects that keep me from calling it mint. This example is as clean as you will ever find. Buy it to use and put it to work for many decades.
$70 This Item Has Been Sold



Heald & Son Toted Beech Smoother.
This wooden bench lane has a nicely shaped tote, a lignum strike button at the toe, and a thick 2 1/4in wide double iron by Moulson. The blade is long and in good shape with just the lightest scattered pitting here and there. It should sharpen up easily with a quick back bevel and be a great user wooden smooth plane.
$45 This Item Has Been Sold



Excellent Austrian Horned Scrub Plane.
This is a true scrub with a 1 1/4in wide blade with a significant camber. It it's in very good condition with some wear and tear from use, but nothing that will keep it from being a great user scrub. The blade is in great shape with no pitting on the back. It should be a great worker.
$26 This Item Has Been Sold



Near Mint Ulmia Horned Smoother.
This is a near mint, barely used horned smoother. It has an applied sole using that baffling joint Ulmia employed on its bench planes. The mouth is incredibly tight. The thick blade is in perfect condition. The body has no damage and very few dings or scratches. The blade is bedded at a higher than usual 50 degrees. It should be a top user smooth plane suited to all sorts of work.
$50 This Item Has Been Sold



German Horned Smoother.
This smoother has a 2in double iron and an extra-dense body giving it a good heft. The iron is very thick and tapered, nearly 3/16in at the business end. The sole has little wear. The iron has no pitting at all. The only flaw is a chip out of the curved horn. It's a great user plane, ideal for all sorts of work of a smoother, but I love it use this sort of plane on green wood especially.
$24 This Item Has Been Sold



Excellent German Horned Smoother.
This is a top quality German horned smoother with a hornbeam body and a boxwood sole attached with the usual geometry-bending joint. The sole has a small check at the corner of the mouth, but it's flat ane xcelletn otherwise with a tight mouth. The blade is exceptional- it is a thick 2in double iron made by Ward, perhaps the foremost edge tool maker in 19th century Britain. Both the iron and cap feature the Ward stamp. This iron is also stamped "best" at the top above the logo. The iron is full-length and in terrific shape with zero pitting. The plane is probably worth it for the iron alone, though it should be a fantastic user.
$30 This Item Has Been Sold



Excellent John Weiss Horned Scrub Plane- Tuned and Ready to Work.
This plane was made by Weiss and bears a mark with the company name and an inset medallion in back of the horn. The plane is tuned up and ready to work. It's a true scrub plane with a very narrow 1 1/16in wide blade with a good camber to it. The beech body has a harder sole (likely hornbeam) attached to it with that crazy glue joint that the German makers liked to employ. It's in ready-to-use condition. I just polished and honed the blade and gave it a test run. It works flawlessly going at diagonals to the grain. It can take a thin shaving or hog off 1/16in at a time easily. See photos for it in use. It's a great working scrub plane that you can put to =use right away.
$55 This Item Has Been Sold



Excellent British Tothing PLane.
This is a great working toothing plane with a nice clean iron. The iron has about 24PPI and more than 1 1/4in of "tooth" left. The plane body has some spots of discoloration, likely tallow. It has a nice overall patina from age and extended use. The sole has little wear and there are no cracks/chips anywhere. There is a maker's mark that I can't quite make out without over cleaning the toe. I'm 100% sure it's British however and almost certain it's a Buck. It's a fantastic use toothing plane to put to use.
$75 This Item Has Been Sold



Small Toothing PLane.
This toothing plane is a bit narrower than most. The iron is 1 3/4in wide. It's a beauty made by John Weiss with more than 1.5in of "tooth" left. It measures about 20PPI. The plane was made by Sandusky. It has some wear but no damage and the sole is in great shape. It should be a perfect plane to put to work.
$70 This Item Has Been Sold



Gorgeous, Near Mint Ulmia Horned Smoother.
This is a top quality smoother with an adjustable mouth, massive double iron, and dense hardwood sole applied to the plane's body. The body might be pearwood or some other very tight grained, closed pore wood. The plane is in near mint condition including the body which has hardly a scratch to the original finish and the blade which is perfect. The double iron measures 1 7/8in wide and has not a speck of pitting at all. The mouth can be adjusted by means of a set screw in the inset "coin" maker's mark. It should be a fantastic worker.
$50 This Item Has Been Sold



Excellent British Toothing Plane.
This plane has an overstruck maker's mark at the heel and a Ellis, Late Berry 2in wide toothing iron. The iron is in excellent condition with more than 2in of "tooth" left. It has an extremely fine tooth count with more than 40PPI from what I can tell. The blade has the elaborate "Oxford Wins" logo. The body is crisp, clean and without damage. It should make a nice user toothing plane for fine work.
$75 This Item Has Been Sold



Outstanding 28in Wooden Jointer by I.E. Smith, Pawtucket, RI.
This is a massive 28in jointer weighing nearly 10lbs. I'ma huge fan of wooden bench planes for their mass and thick blades. They don't often come up in this sort of outstanding condition so when I do find one like this I try to get it at all costs. This one is going to be a fantastic worker. The plane was made ca. 1850 according to AWP-IV. It remains in excellent condition despite its nearly 165 years. The body is crisp and clean with a few tiny dings and scratches. The mouth is extra-tight. It has a nicely shaped closed tote with nice long horn. The blade is special- it's a massive 2 5/8in wide tapered double iron made by the Hancock Tool Co. It's a gorgeous blade with a nice clean back and no pitting at all. Overall it will make an outstanding user jointer plane. The sheer mass of the plane and the thickness of the blade will drive it through just about any wood without chatter.
$100 This Item Has Been Sold



Excellent 22in Wooden Jointer.
this plane was made by the New York Tool co, a mark of the Auburn Tool co. It has a 22in beech body in excellent condition with no damage. The closed tote has a nice long horn with no chips. The blade is a monster 2 1/2in wide tapered double iron with no pitting on the clean back. The mouth is super-tight, almost to the point of being to tight to use. It should make a great jointer plane to put to work in your shop.
$65 This Item Has Been Sold



Varvill 22in Wooden Jointer Plane.
It's pretty uncommon to find vintage British Bench planes larger than smoothers. This is one of only a few Varvill bench planes I've ever seen. Varvill was a top quality planemaker working in York in the mid-late 19th century. This plane is very nicely made. The wedge fits precisely, the tote has some nice detail and a good horn. The sole has no checks and a fairly tight mouth. The original James Cam 2 1/2in double iron is a bit short and has some pitting. I'd be happy to provide a replacement blade with the plane if you'd like. The beech body has a few dings but is overall remarkably clean, It should make a top user jointer plane.
$75 This Item Has Been Sold



Outstanding J. Kellogg Solid Boxwood Plow Plane w/ Irons.
This is a fantastic working plow made by one of the better American makers. This plow is in very good condition and is absolutely usable. The body, arms, fence, nuts, and washers are all solid boxwood, aged to a deep gold color. The boxwood gives it a heft a normal beech plane doesn't have. The screw-arms have a couple of tiny chips, but nothing that will affect use at all. The area of threads nearest the fence, the most important area where the fence is most likely to be in use, are remarkably perfect. The fence has a few dings and a small chip right at the front as seen in the photos. The depths top works easily. It comes with a set of 8 irons, seven made by Globe, an eighth unmarked. All of the blades are in excellent condition and will sharpen up without much effort at all. All fit the plane precisely. The front and rear skates align precisely, without twist, a common problem in plow planes. It's a gorgeous plane and will make an absolutely fantastic worker.
$190 This Item Has Been Sold



Excellent Screw-Arm Plow Plane w/ Blades by Carter, Troy NY.
This is an excellent working plow made by E. Carter of Troy, NY. This plow is in excellent condition and is absolutely usable. The body and fence are beech, the, arms nuts, and washers are all solid boxwood, aged to a deep gold color. The screw-arms have a couple of miniscule chips, but nothing that will affect use at all. The area of threads nearest the fence, the most important area where the fence is most likely to be in use, are remarkably perfect. The arms and fence are beautifully shaped. The depth stop works flawlessly. It comes with a set of 7 irons, all by Thos. Ibbotson. Only the no. 8 is missing, but that's probably the least-used anyway. The blades are all in good shape with no pitting on the backs. They will sharpen up without much labor at all. . The front and rear skates align precisely, without twist, a common problem in plow planes. It's a gorgeous plane and will make an absolutely fantastic worker.
$160 This Item Has Been Sold



Solid User Screw-Arm Plow by L&IJ White, Buffalo, NY.
This is a decent, user plow plane with a few cosmetic issues but still a solid user. It has a beech body, and fence, along with apple arms and boxwood nuts and washers. The whole things has attained a nice, even patina of age and use. It has good threads on the arms, the areas nearest the fence, where they are most important, are near perfect. The washers and nuts spin easily and lock tightly. Both nuts have some dings and wear, but no cracks. The depth stop is tight but extends and retracts easily. The wedge has a small shear from the finial. IT comes with seven blades in the most commonly used sizes. Four are Greaves, the others assorted makers like Sorbys. All of the blades fit perfectly and have no pitting on the back. It's a good, usable plow plane to put to work.
$120 This Item Has Been Sold



Ulmia horned Smooth Plane.
This is a very good working plane with an excellent iron. The plane has all of the usual Ulmia features including the exotic sole applied to the hornbeam body with that baffling joint the European plane makers liked to use. The plane has dings and scratches but no damage. The massive 1 7/8in wide double iron has no pitting at all on the back and a lot of length left. The mouth is adjustable and can be stopped down to near zero. It should be a fine user for those who appreciate wooden smoothers.
$30 This Item Has Been Sold



Copyright (c) Joshua Clark 1997-2015