Peace Misc. Saws
Peace Miscellaneous and Oddball Saws
Peace made a large variety of saws other than the standard handsaws and backsaws. Here are a few I've found.
Peace Patent no. 2 Interchangeable Nest Of Saws
This handle design was patented May 6th 1884. It covers a saw handle with a removable blade. The designs includes a fixed pin and a locking screw. To date I have found only one example with only one blade. This example is clearly stamped with the patent date.
The no. 2 nest of saws and patented handle shown in the 1884 catalog
No. 2
Note the fixed pin
The blade is stamped with the May 6, 1884 patent date.
No. 45 Compass Saw
A simple compass saw with an apple handle. The no. 45 was the top of the line.
1884 catalog description
No. 40 Table Saw
This is a rare saw to find from any maker, especially Peace. I have seen only one example.
1884 catalog description
18in Table Saw Example
Note truncated top horn of handle
Blade is etched
Square Hole Saw
This is a peculiar saw intended to cut holes with square corners. This is the only example I have seen. The blade is bent at a 90 degree angle about half-way though the plate. It's clearly die-stamped with the Harvey Peace name. This saw does not appear in the 1884 or 1890 catalogs. It does appear in the Orr & Lockett Hardware Co. 1898 catalog. The listing for this saw can be seen below.
Peace Square Hole Saw from 1898 Orr and Locket Hardware Co. Catalog
Peace Square Hole Saw
Peace Square Hole Saw
Peace Square Hole Saw
Peace Square Hole Saw
Patent Patternmakers Saw
This saw has a 12in, 14ppi plate which is not tapered in width. It is not listed in any catalog. This is the only example I have encountered. It is clearly etched with Peace's logo and London Spring Steel. The blade is custom-etched for the T.L. Merrill Co., Market Square, Portland, Maine. The most interesting feature Buell July 17, 1883 patent handle. It is apple, wheat-carved on both sides and specially carved to fit the right hand of the user. It is clearly stamped with the patent date. This is one of the three examples (see below) of an open style handle made as per Buell's patent.
Patternmaker's Saw
Buell Patent Handle
Buell Patent Handle
July 17, 1883 patent date
T.L. Merrill & Co. Etch
Peace Etch
Cornelius Tenney no. 25 Patent Handsaw
Tenney was one of the co-owners of the July 3, 1883 patent for the reinforcing plate used on Peace's Perfection line of handsaws. The example shown below is an 18in panel saw with | Tenney's Jan 1, 1884 patent for a small connecting brace which connects the handle to the plate. This is not intended to protect the plate, as the July 3, 1883 improvement is supposed to do. It is intended to improve the rigidity of the connection. This example is clearly marked with Tenney's name, the model no. 25, patent date, and Brooklyn, NY Spring Steel, Patent Ground. It has an apple handle with no carving. This example has Munger patent saw screws. Based on the Brooklyn, NY location, Tenney's known connection to Peace, and the general style of the saw, I have to assume this saw was made by Peace. It is the only example with this patented feature that I have seen.
