Stanley Planes Type 7: Difference between revisions
JoshuaClark (talk | contribs) (Created page with "==Planes made by Stanley 1893-1899.== ===Distinguishing Features (changes from previous type in '''bold''')=== *'''Most examples have the letter “S” cast into the frog,...") |
JoshuaClark (talk | contribs) No edit summary |
||
Line 15: | Line 15: | ||
'''All commentary comes from the original [https://hyperkitten.com/content/library/stanley-bench-plane-dating-page/ Stanley Bench Plane Type Study] ''' | |||
===Related Photographs=== | |||
[[File:April1992PatentBlade.jpg|thumb|none|Blade from a "type 9" bench plane with the "PAT. AP'L. 19, 92" logo]] | |||
[[Category:Stanley Bench Plane Types]] | [[Category:Stanley Bench Plane Types]] |
Revision as of 00:56, 21 February 2020
Planes made by Stanley 1893-1899.
Distinguishing Features (changes from previous type in bold)
- Most examples have the letter “S” cast into the frog, lever cap, and/or bed. This is likely the mark of the Sessions Foundry, who contracted with Stanley to produce their castings.
- Bailey’s name and patent dates eliminated from the brass adjustment nut and cap iron.
- Frog receiver has two shallow grooves, parallel to the plane’s sides, cast into it. The screw holes are located in the grooves.
- Rosewood knob is shaped like a hot air balloon.
- The back of the lever cap is recessed.
- Flat head screws now hold the frog in place.
- The number designation, cast into the toe (“No 4”, etc.), is now spaced farther apart; i.e. “No” is about 1″ from “4”, whereas the earlier models had the two right next to each other.
- “STANLEY” “PAT. AP’L 19, 92” (in two lines) stamped on the iron. The original type study doesn’t mention this, but some of these irons can be found with just *“STANLEY” and not the patent date.
- Lateral adjustment lever is a two-piece construction, with a circular disk replacing the straight portion at the point where it engages the slot in the iron. “7-24-88” is also stamped into the lever, with the rest of the dates, as before.
- The brass adjusting nut now has a left-hand thread.
All commentary comes from the original Stanley Bench Plane Type Study