Type Study Flowchart

Getting started

(Commentary by Jay Sutherland) I’ve converted some of the plane dating information found in Patrick Leach’s Plane Type Study into an easy-to-use hypertext flowchart. Hopefully by answering a few questions about your plane you can determine which type it is.

The flowchart starts by asking questions about the cast iron bed of your plane. I’ve chosen the bed as a starting point because it has many easily identifiable markings, and it probably wasn’t replaced that often.

Unfortunately, many plane types share the same bed markings, so other features are also used in dating. Some plane parts were frequently replaced by their owners, or are easily separated from the plane, such as irons, cap irons, knobs and totes, and lever caps. These features are avoided where possible, along with features that appear in only some planes of a given type (i.e. frog adjustment screw).

Where possible, the flowchart uses parts that were probably replaced less often, such as frogs, depth adjustment screws and lateral adjustment levers. This approach doesn’t guarantee that you’ll date your plane correctly, as the flowchart can be thrown off by some hybrids. The best approach is to use the flowchart to date your plane, and then visit the Plane Type Study and Plane Feature Timeline to verify the type.

Disclaimers

The type study is based on the #4 bench plane Hybrids of plane types are very common This type study applies only to Stanley planes made in the U.S.A. English Stanley planes do not follow this type study. For more information, read Patrick Leach’s comments on Stanley plane dating.

Start Here

Types 1-20

How many patent dates are cast into the bed behind the frog (toward the tote)?

0	1	2	3
Types 1-8 , 15-20	Types 13-14	Types 9-10	Types 11-12

Types 1-8, 15-20

Is the plane size number (i.e., No. 4) cast into the bed?

YES	NO
Types 15-20	Types 1-8

Types 1-8

Is the plane size number (i.e., No. 4) cast into the bed?

YES	NO
Types 5-8	Types 1-4

Types 1-4

Is lever cap back recessed?

YES	NO
Types 53-4	Types 1-2

Types 1-2

Is “BAILEY’S PATENT” “AUG. 31, 1858, AUG. 6, 1867” stamped into the depth adjustment nut?

YES	NO
Type 2	Type 1

Types 3-4

Is the frog receiver a broad rectangular area with an arched rear (toward the tote)?

YES	NO
Type 4	Type 3

Types 5-8

How many patent dates appear on the lateral adjustment lever?

0	1	2	3
Types 4-5,8-9	Type 8	Type 5	Types 6-7

Types 6-7

Is the depth adjustment nut stamped “BAILEY’S PATENT” “AUG. 31, 1858, AUG. 6, 1867”?

YES	NO
Type 6	Type 7

Types 4-5, 8-9

Does “STANLEY” appear on the lateral adjustment lever?

YES	NO
Type 8-9	Types 4-5

Types 9-10

Is the depth adjustment nut stamped “BAILEY’S PATENT” “AUG. 31, 1858, AUG. 6, 1867”?

YES	NO
Type 10	Type 9

Types 11-12

Is the depth adjustment nut large (1.25″ diameter)?

YES	NO
Type 12	Type 11

Types 13-14

Is a raised ring cast into the bed as receiver for the knob

YES	NO
Type 14	Type 13

Types 15-20

Is the bed painted blue?

YES	NO
Type 20	Types 15-19